Trending Rebar Cutters & Benders Products

What is Rebar Cutters & Benders?


Top Customer Reviews: Cepco Tool BW-2 ...

Rating: 4 out of 5 with 16 ratings
4 / 5
They are the small woman in his 60 is the one who spends partorisca like to build coverages. Honradamente, The men are too many expensive to assume, especially when, with the few tools and the ready helper, can take a do one.

Partorisca Professional looking coverages, really precise this tool. More a Jig-a-Spacer of Coverage of the Coverage. A BoWrench is quickly partorisca gather, and simple to use. If your neighbour is bent really, help partorisca have the helper with some force of upper organism, but included to 100 woman of book can use this tool felizmente.
4 / 5
With modern (crappy) forest, absolutely will love this tool. It straightened Out of transfers and warps again and again. Utmost idea, has built well with good materials. Highly recommended.
4 / 5
Goes back partorisca give to spend them that have courbé The alignment has wished!
Truth incredibly Simple to use. Very Simple!
Has joined the star less Transport finds a bit expensive an also simple tool...
But well, like this practical!
5 / 5
Is building The coverage, need this tool. Works exactly as it has described. It is hard, a lot-built, and with each penny once sees that warped yours coverage planks is.
5 / 5
I desire had bought this tool before I have begun partorisca do a coverage. It is easy to use, work well but slides in a joist when that applies a pressure partorisca close an empty in some joints. It could do some modifications in some estacas.
4 / 5
Has finalised so only use the and the life done easier, especially when you are so only. Easy to use.
4 / 5
Does not buy answered he of this tool, buy a real shot. These works like the charm.
4 / 5
Produced excellent, games very useful the installer joins terrace in forest when you are all only and without forcing.
4 / 5
Very useful when precise movement that advise it crooked when you are for calm. It would recommend this product. The just desire has not been like this expensive.
5 / 5
The work adds! It can revoke maquinal of tool partorisca do of any side. Easy to use with a delivery.
5 / 5
Bought and has used this tool recently and was the saver of time . Appeals in and joints of coverage of the controls perfectly situates partorisca leave you to ray he without partorisca struggle
5 / 5
Perfect tool. A must partorisca today “of straight forest”. If it plan on it boarded ossia a tool .
4 / 5
Validates a cost, my employees found it a lot of gains to install hardwood decking
4 / 5
Hubby Was very happy with this compraventa partorisca build our coverage
5 / 5
Excellent tool , left partorisca do to 74 ‘ coverage without curves
5 / 5
Warped forests partorisca decking? This tool the easy fact partorisca manipulate joints of coverage the fasten in place.

Top Customer Reviews: Klein Tools 85091 ...

Rating: 4 out of 5 with 15 ratings
1 / 5
I add partorisca reaming out of EMT, but a Robertson has bitten in some falls of finals was constantly. A reamer will not resist a bit that avenges with, or any one has bitten partorisca this subject. Do very amiably, the ray headed to in the handful of EMT connectors before it result rubbishes .
5 / 5
I thought it that it suck when it bought it to them but has done them stirs it of 1/2' and 3/4' today and the work adds.

Has not used he partorisca 1' except the assume concealed will do included better reason more than a bit is in a pipe so im not having also has concerned.

A robbie the bit is interchangable too much.

Also there are them remarked that you gotta the give the quickly shot in reverse reason the very tiny burr develops in an outside goes in 'er too long
4 / 5
Like this far like this good. They are still very sure if these are better that the fashion of hand-held engine regulates this in spite of.
5 / 5
Works really well. I add partorisca do the plot of EMT laws
3 / 5
robby has bitten is the idea adds but the falls was way too easily.. The stray mine found it already extremely easy to use and he the work adds. Utilisation in my hammer but you can change to the fine need of screwdriver of the bit . Highly I recommend it
5 / 5
Sometimes a screwdriver has bitten is exited but is not a main shot in a product adds global world-wide.
5 / 5
I am returned a dewalt partorisca east a, Very better!
5 / 5
Going Well partorisca a moment so only have 300feets partorisca pipe fact. But faster that pliers.
5 / 5
The better work that has expected, such the pause of reaming!
5 / 5
Thought it would suck when it bought it to them but has done them stirs it of 1/2' and 3/4' today and the work adds.

Has not used he partorisca 1' except the assume concealed will do included better because more than a bit is in a pipe so im not having also has concerned.

A robbie the bit is interchangable too much.

Also there are them remarked that you gotta the give the quickly shot in reverse because the a lot of tiny burr develops in an outside goes in 'er too long
4 / 5
Does really well. I add partorisca do the plot of EMT laws
5 / 5
robby has bitten is the idea adds but the falls was way too easily.. Mina has lost already
5 / 5
found quell'extremely easy to use and he the work adds. Utilisation in my hammer but you can change to the fine need of screwdriver of the bit . Highly it recommends he
5 / 5
Does better that has expected, such the pause of reaming!
4 / 5
It bites it a lot of tien to the boutet aims it that tien the volume déserre

Top Customer Reviews: HighFree 6 Inch ...

Rating: 4 out of 5 with 2 ratings
4 / 5
Some jaws are not parallel how is impossible to do attentive curve. I have tried presionando all some rays but he so only worse. I am disappointed reason a pliers is a lot sturdy construction but sloppy machining/forging.
4 / 5
Pleasantly has surprised. Ossia The solid seamer. Well built and heavy.

Top Customer Reviews: Keenso 3 In 1 180 ...

Rating: 5 out of 5 with 2 ratings
5 / 5
Die Zange ist bei gives ersten Biegung ohne Zuhilfenahme von Verlängerungen, gebrochen. Gut, ich Cube Fitnessstudio-Gänger aber kein Kraftprotz.
5 / 5
Für Dickwandige Rohre nicht geeignet, Große Kraft anwendung,kurze hebelarme..

Top Customer Reviews: Manual 3 In 1 180 ...

Rating: 4 out of 5 with 10 ratings
4 / 5
This bender good works. Work well to bend tubing like the stainless steel that tubes. My subject, this in spite of, is that a bender is not able of curves of tight radii. You will require to purchase the mini-tube bender to do this (a smaller version of this bender), but for a calm time that, this unit results redundant... Unless calm of course need do curves of radio wider.
4 / 5
Looks Well. Good works. It does not believe some terracings on that. Another that that, the time will say on durability. State bending 3/8 Swagelok pipe.
5 / 5
Work well, would be well, to be able to bend the smallest radio, but thinks that am asking too much. Carl
4 / 5
adds bender, has done so only big lines for my transmission of the freshest truck.
4 / 5
Looks well. Good works. It does not believe some terracings on that. Another that that, the time will say on durability. State bending 3/8 Copper pipe. Like this far like this well
any 3/8 SS swagelok the type that tubes. There is broken a boss in a prime minister tries...
5 / 5
Does well, would be well, to be able to bend the smallest radio, but thinks that am asking too much. Carl
4 / 5
Adds bender, has done so only big lines for my transmission of the freshest truck.
4 / 5
Does a lot still with an use to have to that heavy professional.
4 / 5
Very well it hands ultra quickly very good compraventa
4 / 5
First 3 curves on 1/4' has been well, small arm in an end snapped in a 4th. It was very partorisca copper but no shabby partorisca lines of brake of the steel.

Top Customer Reviews: PAGOW Spring Tube ...

Rating: 4 out of 5 with 2 ratings
4 / 5
The fact adds, frames of leaves of light coil in a tube bent but the curves wire easily. You owe that anneal of the discharges after the curves read partorisca the malleable after each step. The element adds
4 / 5
Is oversized relative to a tubing and leave it partorisca deform so only like you has bent he without them

Top Customer Reviews: Malco S3R ...

Rating: 5 out of 5 with 1 ratings
5 / 5
Global
Malco there is roughly solid to add seamers, but like some (any all) of the his look of competitors partorisca dip in the quite hard cradle.

When you are bending seams for a long period of time, so only a force of a cradle can spend your hand was.

I no quite comprise a logic of having such installed hard Cradles where a force has required to spend a seamer has retreated to open the place is minimum.

A plus the subject is when trying squeeze 2 or 3 in the curves results quite hard. Some sleeves would owe that be almost touching when any discharge is inserted. I do with copper.

Hopefully The cracks Yield so much can weld the tightest backside.

Another while, the quality is upper notch .

Top Customer Reviews: Hilmor 1926598 ...

Rating: 4 out of 5 with 37 ratings
5 / 5
Never disappointed with hilmor produced. The frames perfect 90 is. It installs look súper cleaned and professional. A must has
4 / 5
Some laws of orders of tool perfect partorisca these zones stagnate, one 7/8 die is the little tight and a tool the little heavy
1 / 5
I like a bender but inside a week a retraction of a mandel there is prendido partorisca do and now can do not using. A lot of money partorisca the weeks uses
5 / 5
Pricy but value of the money. I surrendered HVAC used It all been any complaint
4 / 5
Never disappointed with hilmor produced. The frames perfect 90 is. It installs look súper cleaned and professional. A must there is
5 / 5
I like a bender but inside a week a retraction of a mandel there is prendido partorisca do and now can does not use. A lot of money partorisca the weeks uses
5 / 5
compare this bender against a YJ with plásticoes mandrels. Has has had questions with tubing when being too kinked using a YJ and the request yes was bad tubing. The serious Curves that use a stock to tube although uses so many benders and a Hilmor bender does noticeably the better curves been due to he is metal more rigid mandrels. While it could be seen like this of the characters where Hilmor has done an annex to bend such that can the to you revokes and there is so only a piece to manage in a tool, but would have preferred to have two of an annex to bend bars (used according to measure of tube) because time very spatial is LIKE THIS stagnate that a plus along unneeded period when bending 3/8 tubes so only among a way with a work is constraints. Of then taking this tool, have really results very better in not requiring the bender. Ossia In my better opinion that that has it lol. In general I think that that it is the good tool done. Has worries roughly service of guarantee in a chance that pauses because Hilmor is feeble in a distribution and canal of supply in some the EUA and has did not take local retailer. In general it would recommend this one in a YJ for this interested.
4 / 5
A bender the fact adds, but with which are month to use very limited a ball of money are fallen off and is now impossible to ensure a crossbar to an organism of a tool. It possesses several tools of this manufacture and have a lot of be durable. It likes hilmor, this must of of state so only of summer a a bad an out of a line. I have tried and-mailing Hilmor, but has has not had never the response.
4 / 5
Has taken this for 7/8' discharges. For 7/8' lineset tubing, when have has had to that do the curve 180 terracings opposite direction a way lineset tubing was uncoiled - which is an absolute worse chance to do the curve - this tool pulled was, although it has had the little smaller ripples in an interior of a curve. Any kinks this in spite of! Otherwise, All other curves have done 90 terracings of or has bent a same way a lineset was uncoiled is exited perfect. To good sure would buy it again. 3/8' tubing bent Perfectly in any direction to all the cost duquel the direction was originally coiled. Take a reverse bending option! Without a reverse bending add-on, calm could find you in the something tight where an only option is to cut a tubing and braze in an elbow. The curves are better that Brazing!
5 / 5
A reverse bending the annex is essential. Without an annex, calm always would require to be able to situate a tool in an interior of a turn. In mine first use, in the middle of some twist I , would have been impossible to take a tool in an interior.

This bending the box is cost each penny. It was of particular use of then fact so only with 7/8' ACR tubing in the basement and crawlspace. Without the second set of hands, was difficult to bend a tubing reliably to follow a street has required, but always could use a tool to tweak the curve to the critical point in a street. It is a lot that satisfies to be able to weave a tubing around without committed and have any joint in a half underlying under armaflex.
5 / 5
The work adds but takes the small taking used also.. The assembly can be confuse in the first place little time uses it but tool a lot well,, really like an aluminium dies .. And any ray has required to dip it near, so only snap in some pieces and curve! The interior And the external curves are.. Releasing a tool to bend that it takes the pocola practical too
4 / 5
has Done the plot to look for on this before the compraventa has a reverse which is a reason but also some moulds are done of metal and no plastic and has supposed to maintain to take these kinks in a big plus that tubes. It can not expect use this summer. It will update after the little transmission outs.
4 / 5
This thing was awesome while it has done.. But it has broken in a 5th or 6th use. A lot disappointed Because has-liked me this tool. I need to be the strongest fact... Breaking in the soft discharges?!?!.. Please give me the tool of substitution and he well.
5 / 5
A lot handy to have thr qualified partorisca bend all the measures of the soft discharges and then use a hydraulic swaging the tool wins save time and returning and solder alot less. You mark good curves without crinkles or thining. Some curves are more like this sweaping also well a reverse annex is the good plus to have
5 / 5
are one experienced HVAC/R the contractor and ossia the very good product. It has done the laws of the service enough bit it easier and faster, as I do not owe that use any where next to a quantity of fittings has has had to that first. Utilisation this tool to bend lines and delete or reduce a need for fittings.
5 / 5
With this box, save you to plot of expensive copper fittings and deletes numerous additional braze near. Less brazing, less oxidation inside your HVAC refrigerant lines. Which is always the worry with POE systems of oil.
5 / 5
These paid for them selves in a first work used them with a time has saved on doing multiple curves and a lot that has to that braze, some revoke to bend the annex is brilliant and the frames is like this simple. Some emissions of pipe instantky of a bender without taking taken or has stuck that it is the good relief
4 / 5
conjoint Adds. All the metal. All the together slides easily and the assembly is quickly. It prefers much more to the mine old YJ near
5 / 5
Love a product the product adds saves money in a work
4 / 5
Ossia one of these tools that you a lot always need but is APPRECIATED to have when calm the precise. Among this bender and a Hilmore expand box, have all precise and will not remain never in the slope during one installs or reparation.
5 / 5
Ive Has used other frames to tube benders, everything with polymer mandrels, this neighbour comes with aluminium mandrels and the reverse bender, leaving you to bend your freon lines to the edifice or wall, a lot useful!!!
4 / 5
Better bender in a phase! Metal in the place of plastic need says more?
5 / 5
The law adds. It has dipped the plot of hours in this tool. It is beginning partorisca aim. Sometimes it hangs.
4 / 5
The product adds, and utmost mark, to good sure the value that takes a reverse annex
5 / 5
has to that tube partorisca twist regularly this tool is sum . Perfect curves every time.
Is the little bulky likes wont returned to these tiny corners but fantastic work where there is room partorisca use it, and a reverse curve fixture is the must partorisca take full use of these tools.
5 / 5
Simple to use. It recommends to use spray of silicone lube in mandrels. Well it built it. Value of the money.
5 / 5
Adds partorisca hard to achieve and zones stagnate with an annex of reverse curve. Well value of the money and no more kinks or addition fittings.
4 / 5
This product is awesome. State in hvac subject 30 years without one. It has finalised so only the work with 600' of 7/8” discharges. He roughly 60 total of curves. Saver Of amazing time. Highly recommend!!
5 / 5
Like this far the easy good bender except an annex partorisca revoke has not been comprised with him
4 / 5
has bought so only my bender little to the long of the month now, and yesterday while it has used a reverse annex partorisca to 90 curve of terracing in the 3/4' pipe. A space of a shoe has broken where attaches has broken. A next thing has discovered in this thing is that it left it kink in a pipe down 90 curve of terracing. It likes-me a chance and relieve fittings but has room partorisca improvements.
4 / 5
Tends partorisca fall avert while dipping on partorisca curve. Works awesome
5 / 5
has any 7/8 in a together, but there is two 3/4! Where partorisca buy 7/8?
5 / 5
The works Add. Amur Some group partorisca revoke in a chance with the place partorisca be.
5 / 5
It produces very good and the big quality work a lot smutty
5 / 5
is utmost I already have the together of CPS. And these are like this better. A reverse curve has to that way that be useful
5 / 5
Work like this described, love a reverse bending attatxhment. Any complaint of me would recommend this to any
5 / 5
has produced adds. Marcos my works look more cleaned and professional.

Top Customer Reviews: Bosch RC2164 1-Inch ...

Rating: 4 out of 5 with 35 ratings
4 / 5
We leave a hammer in hammers partorisca dip. Some instructions say any partorisca do east. We direct partorisca drill by means of 1 and the half rebars before wrecking a bit. Read some instructions and dip a hammer the way of rotation!
5 / 5
He a work, but has taken almost an hour to take 2 pieces of rebar. Constant application of meso and cutting fluent pressure to prevent some flanges to take dulls.
5 / 5
Hammer Of good basic hammer for prize. Used to drill concrete comprising 12' rebar the cutter has purchased, which has done well.
4 / 5
Does not have does by means of a piece of rebar, has bitten was spent before a hole has been cut.
5 / 5
1-1/8”

has USED under waters in tall place
With goes it Spitzna dill. Fact well.
5 / 5
Excellent, has learnt that the touch of cutting fluid never 30 seconds in a tip done the world of difference in cutting speed when that spends for rebar.
5 / 5
This cutter will save a day has paste rebar.
BUT run the slow and does not use excessive force or overheat.
The product adds and would buy Bosch again.
4 / 5
Works like the field when they are some directions . This yard by means of 1/2' and 3/4' rebar quickly and cleanly. A bit it has been it has used the half the time of dozen and tip any wear. Cutting 20 holes in the strongly reinforced aircraft walk of hanger (leading Navy basic) without possibility of king-situating would have been the nightmare without east has bitten.
A lot of reviewers has commented on losing teeth or quickly dulling a bit. For following instructions (not hammering and prendiendo grieves a rebar has been cut) and not forcing a bit still looks new.
Sure economic that can take you a work done.
4 / 5
So only $ 6 to on-at night and 23 partorisca a bit is the shot that has not beaten can be! One of my holes have been centred in rebar, another was the averages in rebar. A bit it has not concerned; it has been thru a cement when has has had to that, also! Tried the titanium coated HSS the hammer has bitten before this, and has not done partorisca dent. It has run this in the Bosch hammer of hammer in periodic-hammer-only way and has has had to that so only 'hammer' partorisca perhaps 25-35 seconds, total, in the each rebar. He in 2 no, the cleaner goes in. It controls so only slightly down in a hammer with pressure in bylines and has left a bit do a work. Also it checks frequently partorisca the pieces that come on a centre of a bit, and maintain a hole soufflé free of chip/of shavings.
5 / 5
I just yard by means of four holes that there has been paste rebar in roughly 5 minutes. Joint: slow your hammer down, any need to overheat a bit. It does not hammer hammer with him, so only turns a bit. It shows a depth, calm once is by means of a rebar then changes behind to your bit of hammer of normal hammer and save your rebar teeth of cutter.
5 / 5
Has 6 tips of carbide is. I think that that it is a partorisca each piece of rebar will drill by means of. Spent two partorisca prevent delays. In spite of following instructions and so only using it on rebar he no last along and partorisca some reason can no partorisca find them locally.
4 / 5
A lot of inconsistent. A bit lasted partorisca 17 course by means of, all some another is lasted partorisca 2 run or less, one there is not even does partorisca one has cut. Any sure he is a place of a rebar in a cement or something more concealed the fact like this inconsistent. A thing that has learnt is that under RPM is more reason when some on hot bit, some tips of carbide begin to exit. We go slow RPM with stop and swipe and constant pressure out of some particles each pocolos small and swipe on a bit to cool it was. We have drilled by means of 25 holes and of the pasts for 8 bits. Unfortunately, ossia one the low plus priced and more easily the available bit with another when being two times a prize. Slowly in that shabby to the plot of bit has a lot of holes to drill
5 / 5
I am returned a bit why he no cut by means of rebar to the equal that has announced. Instead he wallowed out of a hole where and additional shim was necessary to take a still partorisca resist. Any only that, a full quantity of a repayment has not been issued. I am asking a full quantity. Any only waste my time both for me that has to that repair a hole but also for that has to that pack behind on and the ship behind.
4 / 5
Has written previously the negative critique of Bosch RC2104 Rebar the masonry of Cutter has bitten. I have decided to upgrade my description to four stars because some do any when it has used correctly. Some bits OWE THAT be used on rotation so only. Otherwise, A hammering destroyed some teeth on a bit. This in spite of, some bits very very last long. Three perhaps four courses by means of rebar and a bit is has shot. Four holes in $ 28 the bit is expensive that cut in my opinion.
4 / 5
7/8 has bitten In SDS the more any one has cut he partorisca me. I have bought two bit and tried but so only has no the cut. It felt sad partorisca a hammer to the equal that have prendido.
When Has transmission to SDS max and different bit, is gone through a rebar quite fast.
4 / 5
Has Drilled holes in my foundation that use for the regulate 5/8' bit until the swipe rebar. Discouraged, has researched on found this product. Bought the. It has dipped in a hammer, and after drilling by means of A PIECE of rebar, all some teeth of carbide chipped was. That the joke. Has has followed instructions that is coming with this bit and remarked the one who another reviewers in the amazon has said. Rubbish.
4 / 5
Has cut well. It says it does not hammer with him but I drilled anchors it old of cement and ossia an only way has done. It has not hurt a bit.
5 / 5
Inconsistent Quality!

Am spent for NEW of these in the project that has. We have had some east would drill by means of 10-15 pieces of 5 fence before teeth would fail and has had another concealed would not take by means of A PIECE of bar!!!

Does not have any idea which can have such the question with a bit in another but has had!
4 / 5
Eats rebar, use med/light pressure, med speed and water to maintain fresco and irrigate hole. Take the extra of pair reason . The calm tips of free carbide likes his work. Attack 5-10 rebar run
4 / 5
has paste the plot of rebar, this thing will not save a day. Quite taken the moment to cut 3 rebar and is the ache to take a piece of yard was.

Has finalised chopping averts and welding in the sleeve to drive canes of earth.
5 / 5
Calms so that it would expect, but AGREE to take your Rotohammer out of a setting of hammer. It has to that be the hammer that dips so only, or will ruin this thing in walking of seconds.
Beats a hell out of drilling pierce it 8' deep only to paste rebar before paste by means of a final 2', and that it has to move yours drilling in the few thumbs and that try again.
5 / 5
This bit requires the normal hammer has bitten!!!!!. Utilisations this has bitten until has paste rebar that installs this has bitten. Has not reading this until that tries to spend for cement. He no for cement.
5 / 5
He an excellent work in that the be be feign partorisca do.
5 / 5
Dulls And the teeth of the pause of carbide was, chip, or dull. HAS hardly does by means of some 5 notes 60 rebsr.
4 / 5
Likes declared, does not use this partorisca cut cement, will chew this has bitten up. You will know calm to grieve cleared a rebar, then can change behind to your rule has bitten.
5 / 5
Has READ some directions!! Of the that Use three selection of hammer. Justo rotate. Work well.
4 / 5
This has done enough well to take by means of some hard rebar. Highly recommended is drilling holes that can not be moved to avert a rebar. But like another has mentioned the sure taken mark yours hammer out of way of hammer and so only on way to hammer so only, he wreck a bit a lot quickly.
5 / 5
Run thru rebar with ease but sure mark that change your settings in your periodic hammer to hammer to drill when change out of bit. If it calms no, some the cutting teeth will spend was quickly. A SDS + has bitten that will require when drilling holes in 12' the fat concrete wall has reinforced with rebar. The prizes add in some new Bosch has bitten.
4 / 5
The hammer Of core has had to 144 holes 6' deep and 32 of them paste rebar. Our hammer of the core has not turned quite fast to cut like this the found these. His well. I have bought 3 of them and his does not like him cements! When Calm his doors down to in means, really retards down. It gives him some time to cool, uses moderate pressure and if you are not doing a lot of progress, chip of the tooth or two. Highly I recommend him.
4 / 5
Fact very well. I have used the cement jack the hammer has bitten until has paste rebar, changed and cut by means of a rebar with a rebar cutter, then changed behind and there is drilled a rest of a way.
4 / 5
Has had to that drill 6 holes of thumb of still deep to install mine 2 car of estaca stimulates. The paste rebar in only 1 hole, 3 thumbs down. I have ordered this has bitten to only hammer by means of a piece of rebar. This has bitten chipped 2 of some teeth instantly out of a container has begun grieve still to drill. Still it has taken a work done and goring by means of a rebar but can does not see that hard by means of much more of use.
4 / 5
An expensive but necessary tool for when your bit finds some rebar. A rebar has been remarked hardly, has included to use a periodic hammer smaller in way of hammer (agrees, these are SDS-more cutters). Calm then go back to the yours tp your bits of the hammer and the marvel as they have not done never without these cutters.
4 / 5
Has to that it pierce of hammer a lot a lot of in the cements then has the casualidad well calms finally paste some rebar. The regular concrete bits can not cut rebar like this the tool is the necessity. We have had to that drill 36 3/4' holes 6' deep and paste rebar on 11 of these holes. This has bitten cut entirely him.
4 / 5
Has had to that clear 5 holes and so only was able to clear 3 holes. I require to find the better product now. Bummer Reason is not economic.
5 / 5
Has done perfectly. It eats metal like the hot knife by means of butter!