10 Best HITBOX Industrial Power Tools -

30,895 Reviews Scanned And Analyzed
Rank Image Product Name Score Check Price
1 first HITBOX Mig Welder New Appearance MIG200A Functional DC Gas No Gas Self-Shielded MIG 4.0mm ARC Welder MIG Lift TIG MMA 220V HITBOX Mig Welder New Appearance MIG200A Functional DC Gas No Gas Self-Shielded MIG 4.0mm ARC Welder MIG Lift TIG MMA 220V HITBOX
9.9
Score
View Product
2 HITBOX Mig Welder MIG250 MIG TIG ARC Welding Machine 0.8 1.0mm Gas Gasless Welder 220V 3 in 1 Mig Welding Machine HITBOX Mig Welder MIG250 MIG TIG ARC Welding Machine 0.8 1.0mm Gas Gasless Welder 220V 3 in 1 Mig Welding Machine HITBOX
9.6
Score
View Product
3 best HITBOX TIG Welder Stick 200A 110 220V Dual Volt Inverter IGBT 120V High Frequency Start TIG Welding Machine HITBOX TIG Welder Stick 200A 110 220V Dual Volt Inverter IGBT 120V High Frequency Start TIG Welding Machine HITBOX
9.4
Score
View Product
4 HITBOX Plasma Cutter 40A 220V Electric DC Inverter Air Plasma Cutting Machine CUT40 1/2" Clear Metal Cutter HITBOX Plasma Cutter 40A 220V Electric DC Inverter Air Plasma Cutting Machine CUT40 1/2" Clear Metal Cutter HITBOX
8.8
Score
View Product
5 HITBOX ARC200 115A Digital Inverter Welder Arc Stick IGBT Super Mini Portable Welding Machine with Electrode Holder Earth Clamp HITBOX ARC200 115A Digital Inverter Welder Arc Stick IGBT Super Mini Portable Welding Machine with Electrode Holder Earth Clamp HITBOX
8.5
Score
View Product
6 MIG Welding Gun, M-10 MIG Gun Miller #195605 Connector 10FT, 100A.030''-.035'' MIG Welding Gun, M-10 MIG Gun Miller #195605 Connector 10FT, 100A.030''-.035'' HITBOX
8.3
Score
View Product
7 HITBOX Stick Welder 200 140A Welder MMA IGBT DC Inverter Welding Machine with Strap 110V 220V Dual Voltage with Accessaries Earth Clamp Electrode Holder Adapter Cord Portable Ready to Use HITBOX Stick Welder 200 140A Welder MMA IGBT DC Inverter Welding Machine with Strap 110V 220V Dual Voltage with Accessaries Earth Clamp Electrode Holder Adapter Cord Portable Ready to Use HITBOX
8.1
Score
View Product
8 HITBOX Stick Welding Machine 200A 110/220V Dual Volt ARC200 Inverter Welder with 110V to 220V Convert Plug Ready to Use. HITBOX Stick Welding Machine 200A 110/220V Dual Volt ARC200 Inverter Welder with 110V to 220V Convert Plug Ready to Use. HITBOX
7.7
Score
View Product
9 HITBOX MIG Welding Gun- Replacement for Lincoln K530-3- Mini 10 Magnum 100L MIG Gun Replacement, 100A.035''-.045'' (Spaded Lug Connector) HITBOX MIG Welding Gun- Replacement for Lincoln K530-3- Mini 10 Magnum 100L MIG Gun Replacement, 100A.035''-.045'' (Spaded Lug Connector) HITBOX
7.5
Score
View Product
10 HITBOX Plasma Cutter 60A 220V 380V Electric DC Inverter Air Plasma Cutting Machine CUT65 Max Cutting Thickness 45mm Metal Cutter HITBOX Plasma Cutter 60A 220V 380V Electric DC Inverter Air Plasma Cutting Machine CUT65 Max Cutting Thickness 45mm Metal Cutter HITBOX
7.2
Score
View Product

Trending HITBOX Industrial Power Tools Products

What is HITBOX Industrial Power Tools?


Top Customer Reviews: HITBOX Mig Welder ...

Rating: 4 out of 5 with 12 ratings
5 / 5
This description is partorisca a new plus UW-PLMIG200-1 model.

Some sakes:
- Welder does a lot well. We have tried this unit in several projects and his all has turned adds.
- All the mechanism of feeder of the metal.
- Regulate NEMA 6-50 3 welder discharges
- also exchanges diverse message with support partorisca consumables and has answered quickly. They added quickly partorisca sale on amazon. It researches B07QR57S4C on .
- Adjustable Amp / Voltage (the push changes periodic)
- transmission of Feeder

One a lot so that it adds:
- Manuel is quite bad.
- Any adjustment of speed of feeder headed to weigh that it was not never too fast or too slow. But like this far it does so that it do.
- Any key to deactivate a feeder (useful to regulate gas). Need to open and unlatch feeder.

In general very satisfied with a product.
4 / 5
Has bought this in treating he of open box reason can not justify that it buys the tent of boxes Lincoln with means some characteristic for $ 800. I knew it it take the bit of the bet in the but think that ossia the perfect example of the import of big quality. A mig to the torch is really well, feels solid and a boss is a lot has done. They are not fearful of kinking he easily like the era with my last mig. One 10' the period of some bosses is abundance for 90 of work. A boss feeds is all launched or patterned and to to any plastic like them to them some mark some economic plus and feels very solid. You can buy some rollers for the few dollars the piece in ebay. A scheme self is light but with quite a lot of heft to feel quality. The plásticoes is decent quality .

Now for one (light) negatives.
A mig connection of the torch in a car feels the little in a toneless side, but concealed so only could be a fashion of connector. I am not concerned roughly the but would do sure calm the maintenances where he cant be attacked to walk stops. Have has had to that loosen two rays that resists a stuffs of face of the key in just the hair because it maintain a key to return yes presionado all a way. And one @subjects one the big plus for me is that one covers is not the common fashion and neither would require to cut quell'has been and substitute with discharges regulate or find a receptacle of speciality. A clave and TIG the ways have limited also to 160amp in the place of some has announced 200amp of one could be a subject for some.

In general am very impressed with a car for a prize has paid. The ones of the that knows has paid full prize partorisca east on Lincoln has loved so only he mig but that considers that an equivalent car of lincoln is his $ 1200 210mp yes love a clave and tig looks the sound flies it.
Commentary
In general am very impressed with a car for a prize has paid. The ones of the that knows has paid full prize partorisca east on Lincoln has loved so only he mig but that considers that an equivalent car of lincoln is his $ 1200 210mp yes love a clave and tig looks the sound flies it.
5 / 5
In the first place, any tig stinger. Now, a boss takes jammed on with which leaves a spool but before it enter a mig stinger boss. I have changed a wheel of orientation of 0.8 to a 0.9 measure to accommodate a boss of same measure. I think that that a question is a mig boss he . Now the use a clave welder without any one ! This is not the good car. Of to which Likes to be like this critical but gives @them now that one has to that pay a big bucks to take the solid working car. But reason cant some costruttrici of this product dipped more quality to a material, construction, work , His any value a $ is by train of the ask. I wont buy one again.
4 / 5
Easy to use, Easy to dip, can not expect try he with Gas. At present I have used so only he with core of flow. A boat of argon would dip me behind another half of a prize of a welder to buy. So much, it is for another month.
But, this car, Easy to dip out of a box, an only thing there would be more on is a speed of Boss , controled independantly of a Amperage, but, excepts of that, there is at all bad to say.

Has used he with core of flow and clave welder, Both laws well, strike the good arch Welded 1/4 thumb with a clave and some metal of discharge with a Mig setup, Worket the better way that is to be expect.
5 / 5
Mina welder the fact adds. Used the on and was all day today. Then when for the use and has had no light in an exposure. Unit not being able to up. I have verified a power in one covers is well. That the do? Greg
4 / 5
The measure is well, looks to be the a lot of little welder. I have it quell'has used so only a clave like this far but law perfectly. Some advantages would owe that be longer and a boss to be able to is really smaller that has to that be ,for a amperage of th car . If a MIG and TIG work as well as a do one then was a lot of value a prize. This welder is adapted more for a hobbyist .
4 / 5
For a money touches the quite decent welder, his well and small, and takes one 8' boss spool... A synergic the function is good but a speed of the boss is not independently adjustable ( to dip ready he in and avert spatter ) as yes , volume more spatter that it can take with adjustments. Neither it comes with the regulator for mig gas ( but comprises the period of hose thus purpose )
When in the in full current 200 amps has quite a lot of jam to blow entirely 1/4' steel ... But a mig gun cant really manage a heat for long and begun to melt bit it
5 / 5
the product Adds. Apt and the arrival is well, adjustability is well. Manuel is any control a lot was video of Youtube. For a prize and versatility of this welder has been surprised a thickness of armours plate have beaten mig weld
5 / 5
the work adds with MIG WELDING, a TIG function of the welding is not the impulse TIG but is in fact the fashion to start with of the scratch. Calm once take to hang he of a TIG function, he well. But no attended of the professional results with TIG
5 / 5
does not give information that need of car at least 37amp discharges in some advertising. I act with the 20 amp 220 discharges With a welder is looked half way, as I am happy to be able to weld with a boss of flow of core.
4 / 5
He mig acts any Class but no of current. J Has dips The poignee Play souder to the cane and ca works
4 / 5
Adds little use of car he with gas less flow cored returns 11lb circulate it are happy

Top Customer Reviews: HITBOX Mig Welder ...

Rating: 4 out of 5 with 16 ratings
5 / 5
Very easy the setup , a side of the arch of welding is very better that a mig, has found a side mig welding partorisca be the ache sometimes because a boss tends to jam a lot sure if his cause for a cradle in boss or that but otherwise of this small question does really
4 / 5
avenges and a box of nave was pristine. A welder the looks take beaten up with the bat. Have Still partorisca the try and sees does anaways. It was a lot happy to finally receive it znd now has to it to them send behind unless the the take so it is. It can the take discount it the maintain it? Has too many things partorisca do and the needs that welder last week. The ones of the that has time partorisca expect for another.
5 / 5
Has received Joins Car partorisca première that no well and was in bad state.
Has has contacted lucido vendor. He The mine substituted the games of car joins another and these last works partorisca marvel .
Gives 5 stars Touches this excellent service after-come you.
4 / 5
Ossia The add little welder. Infinites of adjustable settings. It was able to weld 24 gauge a lot easily. Also tried on 1/8 steel and penetrates perfectly. Bought partorisca substitute an old tired welder and very happy with this compraventa. Prize a lot well so that this thing does. Just fast note. Mark sure has boss of right measure otherwise a boss wont feeds. I need
5 / 5
Any bad but be conscious when dipping your heat with arch has be welding (has the arch initiated) like the quite hard fact to turn your dial and see which yours heat in. State solders 16 yrs and never seen the car has to that that with his a mig 200 Instead
5 / 5
is hanged compact and light . It is simple the setup for a new beginner, user of house, or professional.
5 / 5
Are still to use a welder, will try it later shipping time, the looks of product adds, is very happy!
4 / 5
good but no Of paper of Utilisation and to regulate
4 / 5
A product does not come with the manual of question and functional users for info unanswered

yours of the half moon Is disappeared on goes of walk of the boss

Additional cost in delivery - misleading
5 / 5
Well but no of paper of Utilisation and partorisca regulate
5 / 5
A product does not come with the manual of question and functional users partorisca info unanswered

yours of the half moon Is disappeared on goes of walk of the boss

Additional cost in delivery - misleading
5 / 5
Hitbox 250. I think a Hitbox will be partorisca add this in spite of a unit was lacking instruction and would think there would have comprised contacts partorisca signal etc partorisca a mig.
5 / 5
Has received In perfect been
Goes a lot well with of the edge lined
Simple of utilisation
4 / 5
the looks well have any tryed still a lot a lot partorisca the instructions will try it punctual
4 / 5
Work a lot well. Strong welder partorisca cochera. I have not used a tig still.
5 / 5
Any map of welding partorisca settings of boss
so only a contact to pour measured in a container

Top Customer Reviews: HITBOX TIG Welder ...

Rating: 4 out of 5 with 17 ratings
5 / 5
Pros:
1. Programmable
2. It retains some last settings in memory
3. The very global works
4. Light transport , easy
Gilipollas:
1. So only a record partorisca presets; the multiple records would leave resetting a way of the fastest car

I like a car. Work a lot comprising on aluminium, is simple one configuring is sincere.
4 / 5
This the very poor quality regulatory fact, filter in a clear plastic gauge, a house of the whole brass does not look well has done. It is your health and your security! A type still sells his elements in a house of big on-line auction. Unitweld2 Is his name there, calm will not take your money behind the and any response to email also.
4 / 5
As well as it has bought a 200p partorisca use of house and like this far this little inverter does a lot very paralización smaw (welding of clave). They are the certificate welder with on two decades of experiences partorisca use an available better crew. This unit has the smooth stable arch and burns 7018 a lot well. Honradamente Have not expected a lot out of him but I am very happy with him. A unit arrived inside perfect condition and with all the parts accounted stops. I will say that some accessories are economic but functional but in east his prize any one a lot to upgrade a stinger and earth clamp. I have it that has not used still a tig function to the equal that are while the argon partorisca arrive but will update a description hardly does! How it is it would recommend this unit to any that looks for the house welder in the estimativa. Small prize but has big action.
4 / 5
Has bought this after trying another product that has had one wrong returning. It controls a female type viril of connection partorisca your controls of zone. My gauge now is doing well. I signal it was taken condensation in an outside of an indicator of account of the glass. Be sure partorisca verify your level while it solders a project.
4 / 5
Is the decent regulator partorisca a prize, an only downside is concealed is has the very slow leak as it does not forget partorisca close your cylinder of Argon when are done welding !
5 / 5
Wishes a gas outlet was replaceable like my hoses have different fittings. I require partorisca find an adapter partorisca return. A regulator is as it has looked for. When I Find an adapter will be partorisca purchase the second unit .
5 / 5
Very small welder like this far, so only tig welded like this far. All an ad said it will do. A lot impresive partorisca a prize. It was a lot it avenges with the 1/16' with the, but comes with the 3/32' with the and some estacas of 2 thoriated tungston this does a lot well. The work of wrist adds, touching on, down. Has current plot plugged to 110v. There is did not press it really still ,welded 18 ga. S S A lot amiably in the corner and the joint of lap is.
4 / 5
Has received the manual partorisca a car of welding , has had the question with a car and he will be substituted, the law adds on stick weld but has had the little subject with tig portion of welding , has been rectified and will give the description in his action
5 / 5
Excellent service of vendor. I have asked the few questions and Lisa have answered a lot of promptly.

A unit operates like this expected partorisca more than metals. Some reviewers has said that he welds aluminium but up to now has not been able of the take to do that. If any or a vendor reads this and has the method, please left partorisca know me.
5 / 5
The Description of the product indicates that it can souder to the aluminium, parcontre the soudeur does not leave . Has need Of has joined soudeuse to the Aluminium can me in référer has joined? Thank you
4 / 5
Acts a lot well take tig and clave. It was very surprised of then was like this economic
5 / 5
Adds tig welder partorisca a prize. He stainless quite amiably.
4 / 5
Works to the equal that has to that welds well for a prize are the poet and did not know it
4 / 5
Welder is lasted three steps on 16steel of g, two strong explosions and the a lot of smoke and a car has been done.
5 / 5
There is welded already, is the good material . It likes of a lot.
5 / 5
The element is coming but a boss of conversor failure. The ad listed it like this included.
4 / 5
The torch Touches souder to the Tig is not that it is showed to the sud the photo. I received him QQ-150A yellow with moin of accessories in place of the WP-17 that would have been compatible with ceramic month.. !

Top Customer Reviews: HITBOX Plasma ...

Rating: 4 out of 5 with 44 ratings
5 / 5
This thing is incredible!! Short by means of 1/2 steel, albeit dulcemente.
Resupplies a long plus touch which give me capacities of better viewing and there was at all bad out of a box.
Has had to that dip the different 220V discharges in owed to the mine recepticle when being different.
And has bought 15 ft of boss of earth to do to to a period still likes him the advantage of torch.
Otherwise Amazing car for a price!!
5 / 5
Well it produce. I have done some Come from of the sud run 220V and the all the works correctly.
Negative points: the manual of the user does not correspond to the product has bought. Lucido Vendor my envoy another manual. This last manual has not gone always a lot The sake.
Has guaranteeed: any to Do of the illusion Of the sud lucido the service down has guaranteeed. Lucido The vendor say that that has a Technical department. Ask lucido Service lucido more near of Montreal, join me has continued or was Montreal. Pair The continuazione, there is apris that he any and has had to that a centre the Vancouver. One you partorisca judge...
4 / 5
It is the decent cutter , the work adds and run sper clean until 3/16'. Yard 1/4' flat, dulcemente and burns a tip on enough well because of a slower speed travesa precise. Calm also can require transmission a 220 spent viril arrive him concealed comes with him. I have had to change mine to the level 220 IN discharges He of welding. For a price this in spite of, am satisfied with a compraventa.
5 / 5
It schemes of quality partorisca the good price, are so only the hobbyist, welder but really like having the cutter of of plasma and is in enormous price that is dual voltage . An adjustable amperage leave you vital control of your courses. A measure of a torch of cutter is sum partorisca take to these something where the grinder so only can not take to. Some courses are cleaned, and where want to bear be. I left to penetrate to some depths have required to take the something welded piece of metal without to a lot of harm the underlying structures. A subject only has has had really was a tripping of 20 Amp 115 V) fusible in a same poster in of the levels to start with lower. Have Still for the try on one 220 Volt but hope until punctual. For a price are very happy with a product and would recommend to friends and family.
5 / 5
To the arrival has been surprised in as small a cutter of plasma is. A lot of packaged and in good been, has bought a cutter of plasma partorisca cut 3/16 material partorisca the project am doing on. A CUT40 cutter of the metal does not have any subject with one 3/16 material. To signal to price think that this was an excellent shot this in spite of. Utilisation this car partorisca hobby partorisca light duty uses one is excellent partorisca this purpose. If you are looking for the car partorisca have to that the heavy commercial applications is is more probably any partorisca you.
Consumables Is easily available in
An only negative part is that I have had to that change one covers. This element is built cost was and calm more probably has to that change of the discharges.
5 / 5
Rid quickly, small and light car. The works add I severed by means of some 5/8 materials and do a lot well. It runs amiably in the some the usual material likes him 1/4 and 3/ of happy with him like this far....
5 / 5
A product arrived when expected, as it has described.
Setup Was easy.
Having A regulator of pressure of the integrated air in a unit would be a profit added but his no the question.
Short very on 120v in of the thinnest courses, will require to hook the to 220v partorisca maintain to trip breakers, but is for this that have bought the unit that can run on 220v.
3 / 5
Instructions of assembly and the parts comprised does not match .

Esgulator' Leaks before achieving 40 psi, which doesnt supply quite pressure to start with cutting.

The tips have comprised is junk.

That says, once using some adapters to hook on a hose my compressor, and using some tips of better quality I dialed this thing to 15 and come from to take my time that cut thriugh any 3/8 steel.

If a costruttore had comprised some better hoses/fittings to attach an air distributes it could be side 3.5 to 4 stars. How it is has have to that the give 3 when so only estimate it 2.5 stars.
5 / 5
That the good-looking car, this yard 1\4 in. Right of sweet steel out of a box on 110V with roughly 50 lbs air without question. His heavy, well this in spite of. Petit And easy to spend, easy assembly , a lot of packaged and would buy another .
2 / 5
I have bought this April of cutter of the Plasma/12/19. I used it two times. I have been partorisca use it today and is not doing. Power the light transmission comes on, but a digital exposure and the defender do not come on. Hmmmm! There is not any fuse that can see of an outside like the question has to that be inside a unit. Need to contact vendor. Life very short! Wow!
4 / 5
This thing is incredible!! Short by means of 1/2” steel, albeit dulcemente.
Resupplies a long plus touch which give me capacities of better viewing and there was at all bad out of a box.
Has had to that dip the different 220V discharges in owed to the mine recepticle when being different.
And has bought 15 ft of boss of earth to do to to a period still likes him the advantage of torch.
Otherwise Amazing car for a prize!!
4 / 5
Has bought this April of cutter of the Plasma/12/19. I used it two times. I have been to use it today and is not doing. Power the light transmission comes on, but a digital exposure and the defender do not come on. Hmmmm! There is not any fuse that can see of an outside like the question has to that be inside a unit. Need to contact vendor. Life very short! Wow!
4 / 5
Is the decent cutter , the work adds and run súper clean until 3/16'. Yard 1/4' flat, dulcemente and burns a tip on enough well because of a slower speed travesía precise. Calm also can require transmission some 220 discharges viril arrive him concealed comes with him. I have had to that change mine to the level 220 IN discharges He of welding. For a prize this in spite of, am satisfied with a compraventa.
5 / 5
To the arrival has been surprised in as small a cutter of plasma is. A lot of packaged and in good condition, has bought a cutter of plasma to cut 3/16” material for the project am doing on. A CUT40 cutter of the metal does not have any subject with one 3/16” material. Of the point of prize thinks that this was an excellent shot this in spite of. Utilisation this car for hobby to owe light uses one is excellent thus purpose. If you are looking for the car to have to that the heavy commercial applications is is more probably any for you.
Consumables Is easily available in
An only negative part is that I have had to that change one covers. This element is built cost was and calm more probably has to that change of the discharges.
4 / 5
Has added this my cause of tools of the tent there are them wanted always one.
The most economic way that any in option of tent, for the hobby uses his hard to justify the really expensive a.
Dipping it near is sincere, has to change of the discharges for north Amsterdam but..... The instructions are not some better but his easy to imagine was.
Inner 20 mins of inaugural a box was cutting steel .
4 / 5
Hubs Can not say quite a lot of positive thing in of the this. Love it and some types have done the value of month of work of organism in the 5 day blitz. Any @@subject or questions with this product. His prime minister the one who is the mechanic was very impressed.
5 / 5
Some works of cutter of the plasma well, recommends to order extra consumables with him. A key of power of a first time that the turns on would stick in an on place. I have substituted a transmission and unit weld has done well for him for refunding me the small portion to cover a cost of one fixed. In general it is the decent car , has a clave welder aswell and recommend that also.
5 / 5
Very happy with a cutter of plasma. Very easy to use and surpasses my expectations. Good and short quality like this as well as an expensive domestic mark. Also Lisa was that it likes to speak to and quickly to answer with the questions have had. Certainly recommend this product.
4 / 5
I plasma has used never cutter before and his súper easy to use. I can cut 1/4 flat steel like his butter. A subject only during assembly is a distributed the clear plastic pipe is too small for a fittings. I have used it measures it the big that has had already. Perfect way to cut steel for the DIY to to the type likes.
5 / 5
A video is 3/16 sweet steel plan. To to I Courses likes him-him the butter. I can not believe a quality of this unit for a prize. Unbeatable And his service of client are adds taste emailed bear of the first manual to purchase and has had he in of the minutes. I produce it adds!
4 / 5
The plasma has used never cutter before and his súper easy to use. I can cut 1/4 flat steel like his butter. A subject only during assembly is a distributed the clear plastic pipe is too small partorisca a fittings. I have used it measures it the big that has had already. Perfect way partorisca cut steel partorisca the DIY to to the type likes.
4 / 5
L 'device L the reception is minie d joins taken 120v ac has has to that the games of transmission joins taken 220 v ac ,so only the apresamiento and the all does the marvel. Surprising like his work.
4 / 5
Instructions very limited but in general looks the good unit partorisca a prize. I took it once dipped on looks partorisca do add perfect partorisca my small works.👍👍
5 / 5
This has been the product adds partorisca small projects. My hubby is the welder but is beginning his own pocola what in a side .. It has been using this partorisca cut our few projects and loves it. You can require take the small plus that returns yours arrest hose but otherwise good car.
4 / 5
Action of prize of excellent/rapport
All of its own to the sud of the 1/4' d dense
has contained Well of cost of mine
5 / 5
. I had it that has not used never the cutter of plasma before and has been impressed with quell'credit operates. I have cut so only 16 guage material like this far but do the very cleaned yard and orderly. An only worry has is an air does not want to has closed was still to grieve a trigger is liberto. It looks to take 30 - 50 dry to close was.
5 / 5
This work of cutter of the good plasma but transmission some 220 discharges of volts reasons this an is not still canadian user!
4 / 5
Súper Does very good and no expensive can of bavure of metal
5 / 5
small short a lot but one can roffe but reward of quality a lot of
4 / 5
Are very satisfied. It is it has joined it schemes very simple to the utilisation and offers an exceptional work touches a prize a lot of abordable!! Thank you
4 / 5
Does not come with
the Correct discharges
feeds hose
Feeds connections of air of the hose
5 / 5
work a lot well would buy it again. The only thing is has the thin cord and is short
4 / 5
I add little car, that Learns that ours was easy, Thank you
4 / 5
So only fact partorisca the few hours. Dead persons and has has had to that the send behind.
Has bought another hope to have better regime with east a.
5 / 5
Three very a lot probleme Cut the 1/4 of thumb
Súper
5 / 5
cutter of the plasma has not done a lot well and looked partorisca be the leading turn.
5 / 5
The works add . It do not doubt partorisca purchase again .
4 / 5
Very very produced partorisca The adore, received in 2 days! I have cut regularly of the metal 1/8 and do The marvel, recommends comes with an excellent service in chance of doubt does a clue and you will answer in very pocolos temp.
4 / 5
This thing is incredible!! Short by means of 1/2” steel, albeit dulcemente.
Resupplies a long plus touch which give me capacities of better viewing and there was at all bad out of a box.
Has had to that dip the different 220V discharges in owed to the mine recepticle when being different.
And has bought 15 ft of boss of earth to do to to a period still likes him the goodness of torch.
Otherwise Amazing car for a prize!!
4 / 5
Is the decent cutter , the work adds and run súper clean until 3/16'. It will cut 1/4' flat, dulcemente and will burn a tip on enough well because of a slower speed travesía precise. Calm also can require transmission some 220 discharges viril arrive him concealed comes with him. I have had to that change mine to the level 220 IN discharges He of welding. For a prize this in spite of, am satisfied with a compraventa.
5 / 5
Hubs Can not say quite a lot of positive thing in of the this. It has loved that and some types have done the value of month of work of organism in the 5 day blitz. Any @@subject or questions with this product. His prime minister the one who is the mechanic was very impressed.
5 / 5
. I had it that has not used never the cutter of plasma before and has been impressed with quell'credit has done. I have cut so only 16 guage material like this far but has done the very cleaned yard and orderly. An only worry has is an air does not want to has closed was still to grieve a trigger is liberto. It looks to take 30 - 50 dry to close was.
4 / 5
The works add . It would not doubt partorisca purchase again .
5 / 5
Very very produced partorisca The adore, received in 2 days! I have cut regularly of the metal 1/8 and does The marvel, recommends comes with an excellent service in chance of doubt will do a clue and you will answer in very pocolos temp.

Top Customer Reviews: HITBOX ARC200 115A ...

Rating: 5 out of 5 with 1 ratings
5 / 5
Incredible
This small soudeuse, smaller that mine boite partorisca eat. And More effective qu joins to $1000

Top Customer Reviews: MIG Welding Gun, ...

Rating: 4 out of 5 with 8 ratings
5 / 5
The substitution adds partorisca my Miller 220. The sample was, a hose is shorter that an original.
4 / 5
Done well Touch my seeds but yard one can
4 / 5
Awesome the quality and the access adds.
5 / 5
Like
5 / 5
has Arrived sooner that estimated and better quality that expected
5 / 5
the element is coming quickly and the interview used without bad descriptions. Orders again has required it .
4 / 5
Has produced of good quality!
5 / 5
You a work partorisca me. I use him occasionally.

Top Customer Reviews: HITBOX Stick Welder ...

Rating: 4 out of 5 with 19 ratings
3 / 5
Running on 110V. It does not have quite can for 7018 canes. It can burn 6013 canes if a surface is prepared well like this for this reason is well.
Does not have a lot another 110V welders to compare to, as you take this with the grain of the salt but are the little disappointed it can not use 7018 canes on 110V.
Now of then can use 6013 canes do not go it to return. I will look for to use he with the 220V system to somewhere once has access to 220V but for now am stuck with using thin cane.
Am not sure is the good car to learn on of then is limited to insurances and material electrodes.
That the be has said the never there is overheated, alleges 60 cycle to owe in 120 amps and would believe it. I can run 6013 1/8' basically any stop in 90 amps.
Is a lot small and light. Has has dated daughters with the main purses. BTW Does not date daughters with massive purses. Some careers of partidrio of the cooling any take while it is turned on. I do not treat it big mine but so only be conscious.
Recommends to read to 220V description although ossia that calm feigns the career, but think has 220v the access so only takes the multiprocess vulcan or something and the call well. (I do not have the vulcan, arrival to listen good things roughly him.)
Go to research that it converts this unit the tig weld cause that entertainment of looks.
5 / 5
pros:
Has been surprised in a small measure. So only hanged roughly 10 lbs and is very portable. A current is good and in bylines. It looks very built and shipped sper fast. Price-wise is comparable to other on-line offers, to good insurances more economic that in some local tents

gilipollas:
the title is a bit misleading, estimated amperage is so only 120An in 120V and 160An in 220V. Some bosses are so only roughly 5 feet long and a cycle partorisca have to that it is so only 40

in general, is the very small car, adds partorisca judges of start and sper portable. The the full description and video in mine youtube canal chris of all the trades
5 / 5
They are the journeyman welder. Usually it solders structural in work . The ones of way that far has burned it by means of varied pounds of 6011 , 7014 and 7018 cane . All a cane was 3/32 thumb . Partorisca Use of house , this little gem preforms perfectly . He NO reliably career 6010 cane , but , 6011 do 6011 like this well . I have not tried still stainless cane , but , does not anticipate of the questions with him .
Partorisca Use of house , does not have to that never require anything main that 3/32 . And , also , sure mark to never use a cord of the smallest extension that 10 has to that operate 25 feet more than a outlet . Absolutely it does not use the smallest cord that 12 is operating in the 30 amp circuit .
Has done the 'cheater' cord so as to be able to maintain mine 120 extension of volt partorisca other uses .
5 / 5
Well soudeuse. Use with 7018 to 160 amp. It has soud Pendant More than 30 minutes and this was a charm. More need of the mine fat soudeuse .
Goes partorisca declare he with my generadora 3000 watts ... To continuation
5 / 5
Clave very powerful welder partorisca his measure. No like this small like mini Hitbox Arch 200, but this welder has a big plus dinse the connectors that do the strongest connections. Has has had to that so only change one covers to the 6-50P 220V discharges and all doing well. Very comparable to a green everl... welders.
Has to that go down a amperage with forces to arch stronger. The fact adds with 7018/7014/6011 solders canes.
5 / 5
This small Car joins it very well reward of quality of the rapport. It touches join soudeuse marries it to him is fact very well operates it. lectrode The title is a bit economic has it the transmission touches one of quality and rallonger his boss also. But The Car like such is incredible.
5 / 5
State using this partorisca the year now, fantastic little car of welding. I have tried a TIG characteristic last week and averts of some weirdness with that in fact begin an arch, is smooth and runs a lot well. It can it has not beaten he partorisca a price.
5 / 5
Utilisation he in the month of games of the house the good personal needs small soudeuse has done gives works to try sper well touches lucido the price are very satisfied goes to see his reliability on a long-term basis
5 / 5
Another then that substitutes of the discharges with a concealed done in canada (which has been resupplied) a welder is surprising has had them my doubts been due to a price but that. Calm the favour and take it casualidad in this little welder. Also puchased a cutter of the plasma Highly suggests that aswell
5 / 5
Soude Good truth. Incredible games lucidos price any soudeuse AC arrives to his ankle. So only he lacking partorisca Do a adapteur l6-30r he 6-50p play partorisca cater use he in has joined taken of soudeuse regulate. With Amparo 30A idalement!
4 / 5
Running on 110V. It does not have quite can for 7018 canes. It can burn 6013 canes if a surface is prepared well like this for this reason is well.
Does not have a lot another 110V welders to compare to, as you take this with the grain of the salt but are the little disappointed it can not use 7018 canes on 110V.
Now of then can use 6013 canes do not go it to return. I will look for to use he with the 220V system to somewhere once has access to 220V but for now am stuck with using thin cane.
Am not sure is the good car to learn on of then is limited to insurances and material electrodes.
That the be has said the never there is overheated, alleges 60 cycle to owe in 120 amps and would believe it . I can run 6013 1/8' basically any stop in 90 amps.
Is a lot small and light. Has has dated daughters with the main purses. BTW Does not date daughters with massive purses. Some careers of partidário of the cooling any take while it is turned on. I do not treat it big mine but so only be conscious.
Recommends to read to 220V description although ossia that calm feigns the career, but think has 220v the access so only takes the multiprocess vulcan or something and the call well. (I do not have the vulcan, arrival to listen good things roughly him.)
Go to research that it converts this unit the tig weld cause that entertainment of looks.
4 / 5
pros:
Has been surprised in a small measure. So only hanged roughly 10 lbs and is very portable. A current is good and in bylines. It looks very built and shipped súper fast. Prize-wise is comparable to other on-line offers, to good insurances more economic that in some local tents

gilipollas:
the title is a bit misleading, estimated amperage is so only 120An in 120V and 160An in 220V. Some bosses are so only roughly 5 feet long and a cycle to have to that it is so only 40

in general, is the very small car, adds for judges of start and súper portable. The the full description and video in mine youtube canal chris of all the trades
4 / 5
HAS has beaten a lot and potential but does not resist an arch at all. I have tried numerous different canes all in 110V and can not resist an arch. For this reason give it the bad indication. I go to try and take the substitution a. This in spite of UnitWeld has been adds to be in contact with. Fast responses
5 / 5
is Coming really fast! I produce it adds, work well, has had to contact a person and answered fast! 5 stars thus shoo!
4 / 5
A longer is lasted goes to see his reliability if any one reward of the quality of the rapport is well.
5 / 5
Utmost of laws for the small unit!!! I suggest 7018 or 1613 canes
4 / 5
Running on 110V. It does not have quite can for 7018 canes. It can burn 6013 canes if a surface is prepared well like this for this reason is well.
Does not have a lot another 110V welders to compare to, as you take this with the grain of the salt but are the little disappointed it can not use 7018 canes on 110V.
Now of then can use 6013 canes do not go it to return. I will look for to use he with the 220V system to somewhere once has access to 220V but for now am stuck with using thin cane.
Am not sure is the good car to learn on of then is limited to insurances and material electrodes.
That the be has said the never there is overheated, alleges 60 cycle to owe in 120 amps and would believe it . I can run 6013 1/8' basically any stop in 90 amps.
Is a lot small and light. Has has dated daughters with the main purses. BTW No given daughters with massive purses. Some careers of partidário of the cooling any take while it is turned on. I do not treat it big mine but so only be conscious.
Recommends to read to 220V description although ossia that calm feigns the career, but think has 220v the access so only takes the multiprocess vulcan or something and the call well. (I do not have the vulcan, arrival to listen good things roughly him.)
Go to research that it converts this unit the tig weld cause that entertainment of looks.
4 / 5
AC/DC has used At the beginning 7018 canes, 3/32. It would not maintain an arch that goes if my life is depended on that. Perhaps burn for 3 second and an arch prenderían. After doing some investigation has listened that this small inverter the cars run more with AC only canes. As I have bought 3/32 7018 AC the canes and burns them any question that careers on 110 or 220. It has run a car in 85 amps on 110, burned three canes constantly until I have burst my breaker. The short long history, after buying a lot of different canes and taking pissed was, AC the canes do well with this car, any ac/dc
5 / 5
HAS has beaten a lot and potential but will not resist an arch at all. I have tried numerous different canes all in 110V and can not resist an arch. For this reason give it the bad indication. I go to try and take the substitution a. This in spite of UnitWeld has been adds to be in contact with. Fast responses

Top Customer Reviews: HITBOX Stick ...

Rating: 4 out of 5 with 60 ratings
5 / 5
Measure: ARC200 another updates This thing is cut at all of amazing. It was gouging with him constantly on 100A paralizaciones very on 15 minutes and a thing very included take warm. My fellow the one who was around is taking some hips.

Like this far like this well, but as it has expected a build is ... Well it is less than $1 for amp well of the DC supply partorisca be able to. It is certainly value adds, but a boss is 14 AWG mid-note (estimated partorisca in better 20A, has included 12 awg in this note would be estimated partorisca 25A), so that it has to that be changed partorisca the 12 or 10 awg cord. This in spite of, uses connectors of altarpiece, as one fijamente is easy. One covers was also the L6-20, which am far down that is to require, has changed to bear a L6-30 like an absolute minimum (50One would be better). A sticker in a subordinated clearly declares nominal current of and arises in startup of on 37A. A lot of rays have come the factory undressed and a casing was the little bent, but does not import with quell'I that takes partorisca $200 . Still giving it 5 stars because you will be hard pressed partorisca find anything approaches this class partorisca be able to and quality in this prize anywhere more. I will be partorisca do more trying over time, assuming some controls of current start on, this would have to that maintain his indication!
Also currency partorisca swim, any UL, CSA, , or FCC certification, any that are to surprise. Unplug When any into use.
5 / 5
Measure: ARC200 are partorisca focus red welder and has used miller and rucksack of Lincoln fashion welders in a field, and this little welder is like this well if any better. Partorisca 179 bucks take the car of welding that can burn 1/8 7018 in 120An all day long. It comes with it cover it fashionable to close to transfer that I swapped was partorisca the regulate 220V 3 prong discharges. Also it comes with the earth of good quality clamp and clamp fashion stinger with 10' advantages, and the chance partorisca spend. It solders Of rucksack “to appoint” to mark the cars compare in 700-1500. If I take the year out of this car has paid partorisca he 10 times on. It can a lot of recomend enough.
4 / 5
Measure: ARC200 A general availability of DC-inverter arch welders has done these tools far more abordables that a traditional transformer-has has based unit. This particular model, a ARC200, is the decent small welder and extracted well. It is quite small and light and comes with the stock exchange to spend. Some bosses of welding are removable (his hook to a welder reason look to be very solid interlocking connectors) and a schemes clearly can be used with any polarity, although a together rule on thus type of clave welder probably would be estraight polarity', which has a cane of negative welding and a workpiece positive.
My decision to estimate he in 4 more than 5 stars are based in several characteristics of this welder that thinks could be improved. For example a amp regulating the control there is virtually any control to the turning and is very easy to accidentally clash it and reset he without @giving . One covers to line that comes with a welder, the lockable fijamente to circulate with 3 has twisted leave (a NEMA L6-30P) is not one covers to regulate used for 220 volt welders, at least in some the EUA and Canada. If this welder is any one is first, and so only 220 V, welder then a receptacle of pertinent wall could be installed specifically thus welder. It notes this in spite of that one '30' in a name of one covers informs to a fact that one covers is has estimated described is 30 amps. These advantages to the material is a subject of entity with this welder, specifically a cord of line is distributed with. This welder looks to be of the same like another available low cost DC-inverters in that a cord of line uses 14 AWG fine-edge copper bosses. This usually would be considered pertinent for 15 amps, perhaps the little amps more as several factors, but this welder in his maximum start (which is in fact the little down 200 amps) will draw roughly 37 amps, and of course will require for this he 40 amp circuit. A ARC200 when used in full start (180 amps) has 30 has to that it has estimated the cycle and I assume some designers or the constructors have counted in a cord to line that cools was during a pause in welding, no the particular ready hope. Still in a ARC200 100 cycle to have to that (99 amps) a car will be to draw roughly 18 amps and ossia really one overburdens for one 14 cord, although any outrageous. I have decided to substitute a cord of line with 10 AWG with a level 220 V welding spent, the NEMA 6-50P.
In general this DC clave welder can produce quite decent welds and with the variety of diameters of canes of welding until 4.0 mm (5/32 in.).
5 / 5
Measure: ARC140 Wow, this little box there is roughly his punch. When I have opened a container and inspected it a first what that the paste was a measure , is incredibly tiny, likes the toy of the tiny boy.

A Good:
Some bosses and fittings looks really well for the car in this row of prize and has done well on first tries of roughly 12+ 3/32 electrodes (6011, 6013 and 7018). Place to 100 amps has far penetration more orders that a 100AC the diagrams also have. A fast control of current start tip that a current to run is attentive ( has dipped the to 100 amps take 100 while it runs and roughly 116 during initial arch). I have run he in max can in brief but has run mostly in a 100-130 row to try. Any overheating has been remarked but are trace the few unexplained occasions arch cutout. It is hard to say this time but I suspect was caused by the bad earth in a piece of steel of soiled test like resupplied grounding clamp has the contacts describe very small with a part when using flat plan (can upgrade). A bit the dial does to regulate current easy and attentive.

A Bad:
Here is a reality, the look in an is economic. Some looks of main unit to be very drawn and built but suspect the second company has taken these parts and gathered them for sale in north Amsterdam. A markings in a unit is basic and no tip a current or voltage of a unit and any security markings so that it does not think that is to say the CSA the agreed element like to be careful during use. Included a bit those that messages of the security on there has grammatical errors that wins the laugh when calm read him.

A main defect in a unit is a cord to be able to. Some looks of boss to be of a wrong gauge. It is estimated in just down 21 amps like this has to that have at least he 12 gauge cord but to to the looks more like 16 of the how is a lot so only for around 10 amps 'officially'. If run a unit in full power for hot long periods on and result the fire hazard. Also of the discharges of finals is the pertinent 20One has estimated 220 discharges BUT like such can it a lot of clamp to such the small cord! As such boss/of discharge subtracts unsupported and first time I 'the test tugged it' an of some bosses rasgaron loose of an interior of electrical rays. There is remedied a @@subject before it result critic but be conscious of the treat first of the use or can have the fire.

In general am pleased to arrive to this point, yes maintains to do and does not take the fire because of some subjects has mentioned thinks that will take my cost of money.
5 / 5
Measure: ARC200 has taken this unitweld Arch 200 small welding car. They shipped it quickly. It can any one has verified he in the reception and I verified it 30 days later. A small rheostat has been broken in a nave. On contact with Unitweld, has shipped quickly a piece to repair. I try it today with types of multiple of cane of welding and this small car welded everything of them comprising 7018 1/8'. This amazing small car work a lot well without any overheating. I give him the 5 stars for qualities and a efficacity of this car, for his anxiety and attentive service, and for a fast expedition of a material. In a picture can see in some have left to 6013 raisin, in a half the 7018 1/8' spend and in a legislation he 7018 3/32' raisin. As we can see, work a lot well in rusty the steel and these canes has not been in an optimum condition.
5 / 5
Measure: AT2000 Certainly are the beginner of total welding and does not have any base for comparison, but has directed to do a bit decent looking has this car. And some joint concealed does not fall averts afterwards attacking with the hammer. I am using a Forney 7018 canes.

This looks to have one same specs like another dual voltage HITBOX car in the prize he down plus.

An earth clamp has taken with my car looks more economic that a a pictured. Has the solid copper strap in place of a pictured braided a. As it has mentioned elsewhere some advantages are quite short (5ft). It has not been a lot a subject for me like this far but probably will substitute him with more along some punctual. Perhaps an intention was for you to use a strap of shoulder to 'fray' a welder and is for this that some advantages are like this short?

Has been using it on 110V like this far. The next adventure will be to connect it to 220.
4 / 5
Measure: ARC200 Update. There is remarked that my discharges was a wrong boss gauge for some estimated amp (16AWG) Of the discharges will be substituted. Maintaining an indication in 3 stars been due to service of client

Like this far like this well, read some other descriptions in amperage and that you are surer in the 40 amp that the breaker for summit arises in 200 amp exited this in spite of a time to clear for the 30 amp that the breaker probably will leave for a momentary 37 amp summit... As it was extremely short. 28.8 current flow nominal bad precise that 30 amp line like the minimum.

Lisa of the service of client is orders also, fast responses. In general the fantastic buying experience like this far thanks to UNITWELD and Amazon

Now, he trying is in his phases of creature so that it update this description that goes forward I so that volume more hours in this car.
5 / 5
Measure: ARC200 This thing is ridiculous for a prize, my only complaint is that they have fallen a prize for $ 30 legislations with which bought it!!! This averts, my impressions; I have not had long with him so it can not speak his longevity but is quite that surprises like this far. All the chance of metal, comprising a boss, although the desire was any colour another it salmon. A pair of some rays has been undressed well out of his, but a innards is relatively decent and any one has has recycled bit (believes it or not launching the electronic components have used random in súper the economic Chinese elements is not unheard of). It can transmission really good. Power boss could be beefier, but frankly am quite sure calms far will surpass a cycle to have to that before the burn out of one covers or boss. It is a L6-30 spent this in spite of, any sure the one who the leading poster was on roughly there. To good sure has balls, bought it in fact to try my hand in welding of clave the thin material but imagine take used for just roughly all has bought like this 1/8' 6011, 1/8' 7018, and 3/32' 6013. They are by train of the find Hard to take an arch has attacked in the down quite amperage with one 6013 that does not blow by means of a material, but this will come with practice and does not import of more folks in all the chance. I have tried both a 7018 and 6011 on some 3/8' flat that has had lying around and the short work done of him, has to very sure this thing could do an acceptable work of welding 1/2' with the 5/32' electrode. After touching in that for the bit has decided to try that I have cut one 3/8' with the 6011, as I cranked the to all suffer and has gone the city. Cut entirely and a lot included take warm. For the pro, this is not a welder, but for a rest of knots ossia like this well likes to take for anything under the glorious. It can not be happier like this far, this in spite of can not believe the one who this economic !
5 / 5
Measure: ARC200 Ossia the very little welder. It is Tiny, an image is deceiving, control some dimensions of product to see that I bad. A welder is also ultra light and easy to spend.

An earth and the boss of electrode is the little short (perhaps 4-5 ft) to the equal that will require to move a real welder from time to time to give some semence slack and any to extend them was. A welder is estimated for 200 AMPs but maxes is gone in 190 according to a spec spent.

A welder comes with the NEMA L6-30P arrived that looks of 14 AWG wire which is the hair thins for one 20-30 amps in 220/240 with a draw of instant of until 32A. I have contemplated to substitute an assembly of discharges with him NEMA 14-30 but has done it L6 to 14-30 adapter instead (the neutral boss goes nowhere, so only require some two hot bosses & earth to connect). Like this far at all it is melting or taking excessively hot.

A start to be able to is stable, attacking an arch is easy and can do a lot of type of welding. I have not used he for more than 15 minutes directly but looks well. Obviously this is not the commercial welder like this he feigns use 1/4 canes with 3' law of steel (perhaps) but probably calms will not be happy and has not been to code.

For work around a house, tent, park and cochera this welder is well. When Cellular I use he with a 8kw Generac (10kw is arisen) generator (XT8000) and in the full power has paste seldom 7500 watts. The majority of welding is in 60 -120 amp diverse that draws among 4 and 6 kilowatts so many has to that it reads with the smallest generators while you factor in cycle to have that and max amperage / the voltage for any electrode is using.
4 / 5
Measure: ARC200 was skeptical when I have seen a prize and measure of a box, but has required to weld the frame out of 1/4' and 3/8' steel and mine cheapo MIG did not go it to cut.

Cranked Until a max, this thing can have the habit to cut 1' steel with the wet cane or gouging torch.

Is incredibly small and light. In a measure and weight of the lunchbox. I know some purists will say you that so only the Miller, Lincoln, etc will suffice, but if you are not welding professionally, day in, the day was, really see any need.

An only downsides that has found is that an earth clamp and the title of electrode is kinda economic/mediocre. It conceal it is not the big shot, is easily replaceable. I already dipped in the bernard the fashionable title for $ 10 and the earth clamp can be had for another $ 10.

Better welder for a money has has not used never. Ever.
4 / 5
Another updates This thing is cut at all of amazing. It was gouging with him constantly on 100A paralizaciones very on 15 minutes and a thing very included take warm. My fellow the one who was around is taking some hips.

Like this far like this well, but as it has expected a build is ... Well it is less than $1 for amp well of the DC supply partorisca be able to. It is certainly value adds, but a boss is 14 AWG mid-note (estimated partorisca in better 20A, has included 12 awg in this note would be estimated partorisca 25A), so that it has to that be changed partorisca the 12 or 10 awg cord. This in spite of, uses connectors of altarpiece, as one fijamente is easy. One covers was also the L6-20, which am far down that is to require, has changed to bear a L6-30 like an absolute minimum (50One would be better). A sticker in a subordinated clearly declares nominal current of and arises in startup of on 37A. A lot of rays have come the factory undressed and a casing was the little bent, but does not import with quell'I that takes partorisca $200 . Still giving it 5 stars because you will be hard pressed partorisca find anything approaches this class partorisca be able to and quality in this prize anywhere more. I will be partorisca do more trying over time, assuming some controls of current start on, this would have to that maintain his indication!
Also currency partorisca swim, any UL, CSA, , or FCC certification, any that are to surprise. Unplug When any into use.
4 / 5
Are partorisca focus red welder and has used miller and rucksack of Lincoln fashion welders in a field, and this little welder is like this well if any better. Partorisca 179 bucks take the car of welding that can burn 1/8 7018 in 120An all day long. It comes with it cover it fashionable to close to transfer that I swapped was partorisca the regulate 220V 3 prong discharges. Also it comes with the earth of good quality clamp and clamp fashion stinger with 10' advantages, and the chance partorisca spend. It solders Of rucksack “to appoint” to mark the cars compare in 700-1500. If I take the year out of this car has paid partorisca he 10 times on. It can a lot of recomend enough.
4 / 5
A general availability of DC-inverter arch welders has done these tools far more abordables that a traditional transformer-has has based unit. This particular model, a ARC200, is the decent small welder and extracted well. It is quite small and light and comes with the stock exchange to spend. Some bosses of welding are removable (his hook to a welder reason look to be very solid interlocking connectors) and a schemes clearly can be used with any polarity, although a together rule on thus type of clave welder probably would be estraight polarity', which has a cane of negative welding and a workpiece positive.
My decision to estimate he in 4 more than 5 stars are based in several characteristics of this welder that thinks could be improved. For example a amp regulating the control there is virtually any control to the turning and is very easy to accidentally clash it and reset he without @giving . One covers to line that comes with a welder, the lockable fijamente to circulate with 3 has twisted leave (a NEMA L6-30P) is not one covers to regulate used for 220 volt welders, at least in some the EUA and Canada. If this welder is any one is first, and so only 220 V, welder then a receptacle of pertinent wall could be installed specifically thus welder. It notes this in spite of that one '30' in a name of one covers informs to a fact that one covers is has estimated described is 30 amps. These advantages to the material is a subject of entity with this welder, specifically a cord of line is distributed with. This welder looks to be of the same like another available low cost DC-inverters in that a cord of line uses 14 AWG fine-edge copper bosses. This usually would be considered pertinent for 15 amps, perhaps the little amps more as several factors, but this welder in his maximum start (which is in fact the little down 200 amps) will draw roughly 37 amps, and of course will require for this he 40 amp circuit. A ARC200 when used in full start (180 amps) has 30 has to that it has estimated the cycle and I assume some designers or the constructors have counted in a cord to line that cools was during a pause in welding, no the particular ready hope. Still in a ARC200 100 cycle to have to that (99 amps) a car will be to draw roughly 18 amps and ossia really one overburdens for one 14 cord, although any outrageous. I have decided to substitute a cord of line with 10 AWG with a level 220 V welding spent, the NEMA 6-50P.
In general this DC clave welder can produce quite decent welds and with the variety of diameters of canes of welding until 4.0 mm (5/32 in.).
5 / 5
Wow, This little box there is roughly his punch. When I have opened a container and inspected it a first what that the paste was a measure , is incredibly tiny, likes the toy of the tiny boy.

A Good:
Some bosses and fittings looks really well for the car in this row of prize and has done well on first tries of roughly 12+ 3/32 electrodes (6011, 6013 and 7018). Place to 100 amps has far penetration more orders that a 100AC the diagrams also have. A fast control of current start tip that a current to run is attentive ( has dipped the to 100 amps take 100 while it runs and roughly 116 during initial arch). I have run he in max can in brief but has run mostly in a 100-130 row to try. Any overheating has been remarked but are trace the few unexplained occasions arch cutout. It is hard to say this time but I suspect was caused by the bad earth in a piece of steel of soiled test like resupplied grounding clamp has the contacts describe very small with a part when using flat plan (can upgrade). A bit the dial does to regulate current easy and attentive.

A Bad:
Here is a reality, the look in an is economic. Some looks of main unit to be very drawn and built but suspect the second company has taken these parts and gathered them for sale in north Amsterdam. A markings in a unit is basic and no tip a current or voltage of a unit and any security markings so that it does not think that is to say the CSA the agreed element like to be careful during use. Included a bit those that messages of the security on there has grammatical errors that wins the laugh when calm read him.

A main defect in a unit is a cord to be able to. Some looks of boss to be of a wrong gauge. It is estimated in just down 21 amps like this has to that have at least he 12 gauge cord but to to the looks more like 16 of the how is a lot so only for around 10 amps 'officially'. If run a unit in full power for hot long periods on and result the fire hazard. Also of the discharges of finals is the pertinent 20One has estimated 220 discharges BUT like such can it a lot of clamp to such the small cord! As such boss/of discharge subtracts unsupported and first time I 'the test tugged it' an of some bosses rasgaron loose of an interior of electrical rays. There is remedied a @@subject before it result critic but be conscious of the treat first of the use or can have the fire.

In general am pleased to arrive to this point, yes maintains to do and does not take the fire because of some subjects has mentioned thinks that will take my cost of money.
5 / 5
Has taken this unitweld Arch 200 small welding car. They shipped it quickly. It can any one has verified he in the reception and I verified it 30 days later. A small rheostat has been broken in a nave. On contact with Unitweld, has shipped quickly a piece to repair. I try it today with types of multiple of cane of welding and this small car welded everything of them comprising 7018 1/8'. This amazing small car work a lot well without any overheating. I give him the 5 stars for qualities and a efficacity of this car, for his anxiety and attentive service, and for a fast expedition of a material. In a picture can see in some have left to 6013 raisin, in a half the 7018 1/8' spend and in a legislation he 7018 3/32' raisin. As we can see, work a lot well in rusty the steel and these canes has not been in an optimum condition.
5 / 5
Update. There is remarked that my discharges was a wrong boss gauge for some estimated amp (16AWG) Of the discharges will be substituted. Maintaining an indication in 3 stars been due to service of client

Like this far like this well, read some other descriptions in amperage and that you are surer in the 40 amp that the breaker for summit arises in 200 amp exited this in spite of a time to clear for the 30 amp that the breaker probably will leave for a momentary 37 amp summit... As it was extremely short. 28.8 current flow nominal bad precise that 30 amp line like the minimum.

Lisa of the service of client is orders also, fast responses. In general the fantastic buying experience like this far thanks to UNITWELD and Amazon

Now, he trying is in his phases of creature so that it update this description that goes forward I so that volume more hours in this car.
5 / 5
Ossia The very little welder. It is Tiny, an image is deceiving, control some dimensions of product to see that I bad. A welder is also ultra light and easy to spend.

An earth and the boss of electrode is the little short (perhaps 4-5 ft) to the equal that will require to move a real welder from time to time to give some semence slack and any to extend them was. A welder is estimated for 200 AMPs but maxes is gone in 190 according to a spec spent.

A welder comes with the NEMA L6-30P arrived that looks of 14 AWG wire which is the hair thins for one 20-30 amps in 220/240 with a draw of instant of until 32A. I have contemplated to substitute an assembly of discharges with him NEMA 14-30 but has done it L6 to 14-30 adapter instead (the neutral boss goes nowhere, so only require some two hot bosses & earth to connect). Like this far at all it is melting or taking excessively hot.

A start to be able to is stable, attacking an arch is easy and can do a lot of type of welding. I have not used he for more than 15 minutes directly but looks well. Obviously this is not the commercial welder like this he feigns use 1/4 canes with 3' law of steel (perhaps) but probably calms will not be happy and has not been to code.

For work around a house, tent, park and cochera this welder is well. When Cellular I use he with a 8kw Generac (10kw is arisen) generator (XT8000) and in the full power has paste seldom 7500 watts. The majority of welding is in 60 -120 amp diverse that draws among 4 and 6 kilowatts so many has to that it reads with the smallest generators while you factor in cycle to have that and max amperage / the voltage for any electrode is using.
4 / 5
Was skeptical when I have seen a prize and measure of a box, but has required to weld the frame out of 1/4' and 3/8' steel and mine cheapo MIG did not go it to cut.

Cranked Until a max, this thing can have the habit to cut 1' steel with the wet cane or gouging torch.

Is incredibly small and light. In a measure and weight of the lunchbox. I know some purists will say you that so only the Miller, Lincoln, etc will suffice, but if you are not welding professionally, day in, the day was, really see any need.

An only downsides that has found is that an earth clamp and the title of electrode is kinda economic/mediocre. It conceal it is not the big shot, is easily replaceable. I already dipped in the bernard the fashionable title for $ 10 and the earth clamp can be had for another $ 10.

Better welder for a money has has not used never. Ever.
4 / 5
This thing is ridiculous for a prize, my only complaint is that they have fallen a prize for $ 30 legislations with which bought it!!! This averts, my impressions; I have not had long with him so it can not speak his longevity but is quite that surprises like this far. All the chance of metal, comprising a boss, although the desire was any colour another it salmon. A pair of some rays has been undressed well out of his, but a innards is relatively decent and any one has has recycled bit (believes it or not launching the electronic components have used random in súper the economic Chinese elements is not unheard of). It can transmission really good. Power boss could be beefier, but frankly am quite sure calms far will surpass a cycle to have to that before the burn out of one covers or boss. It is a L6-30 spent this in spite of, any sure the one who the leading poster was on roughly there. To good sure has balls, bought it in fact to try my hand in welding of clave the thin material but imagine take used for just roughly all has bought like this 1/8' 6011, 1/8' 7018, and 3/32' 6013. They are by train of the find Hard to take an arch has attacked in the down quite amperage with one 6013 that does not blow by means of a material, but this will come with practice and does not import of more folks in all the chance. I have tried both a 7018 and 6011 on some 3/8' flat that has had lying around and the short work done of him, has to very sure this thing could do an acceptable work of welding 1/2' with the 5/32' electrode. After touching in that for the bit has decided to try that I have cut one 3/8' with the 6011, as I cranked the to all suffer and has gone the city. Cut entirely and a lot included take warm. For the pro, this is not a welder, but for a rest of knots ossia like this well likes to take for anything under the glorious. It can not be happier like this far, this in spite of can not believe the one who this economic !
4 / 5
Has read some first descriptions to buy. Ossia The diagrams adds . Especially for a prize. My edges in-the law is the professional welder. It does not know as to do of him at the beginning, but he the welding has finalised so only me it trailer of solid utility fabricated mostly of 1/8 thickness that tubes and 1/4 dish. A max the setting was 145 amps. Any subject, the one who his surprise.

Like the signal of descriptions was, one covers to regulate that coming with this wire fence for 240 and way too small in gauge. Any sure reason his this. As you can see in some photos, has changed he for 8 gauge boss with covering pertinent. A car can now draw 40 amps on 220 if need be.

My mathematics and elected distributes has been confirmed by the fellow the one who is an electrical engineer . Caveat. This car is certified for North American has has recognised agencies. Any ULC or CSA.

Have it attached to the piece of the plywood likes the boss is weighed more than a car. Red painted for fun. We call it to knots a Linkin welder.

An only reason does not have to data likes 5 of the star is owed so only to a transmission of discharges has required, this in spite of one calm changes it, is to 5 star sure
4 / 5
WASTE Of has had THIS WELDER in the BOX OF WHEN I PURCHASED It A bit those that MONTHS BEHIND IN THE MINE has BEEN To FINALLY USE It YESTERDAY And TURN ON But DOES not BEGIN WELDING IN ACTIVE has INCLUDED TRYED partorisca CONTACT The COMPANY BUT APPARENTLY Is Any OUT OF BUSINESS WAY Or GO ARE SCREWED OUT OF MI MONEY And I HAVE An ENORMOUS PAPER A lot DISAPPOINTED... NOW The AFTER TAKING The HE I FACT that COULD Of has TAKEN MY MONEY BEHIND Or A REPARATION OUT OF me NOW There Is AT ALL!!!....AS I AM PISSED WAS!!
4 / 5
Partorisca Of the money and my concrete purpose like general hobbyist has required something portable, compact, easy to use, undressed the basic functionality all so much partorisca complete other cars. It has used this partorisca few months now and has pleased partorisca fulfil my requirements. Substituted a stinger and short bosses like @@subject of the preference that period of commentaries of boss and type of stinger has been developed in Ad . I found it partorisca be reasonably attentive (amp, action) but are certainly any one the professional. Like this it boxes concealed has not drawn an attention of a spouse partorisca me partorisca answer to mine buys discreet
4 / 5
originally gave it so only to 1 description of ESTRELLA but there is upgraded the to 3. I have struggled partorisca take it connected without cutting of one covers original or that substitutes a cord when I received it in the first place. A device requires 250Vac, but avenges with him NEMA 5-15 connector that so only goes to 15 AMP - 125Vac outlets. The requirement of the maximum power of a unit is 7500 W, which down 250Vac requires 30 Amps. The good regime that finds an adapter of the 6-30 to 5-15.
A provider was quickly partorisca answer with sending me an adapter (1/2FT along). A unit is small (very small in fact compared to another) and light, the law adds inclusa with 'Forney 31305 6011 Welding Roseau, 5/32-Thumb' quell'I has run among 180-200 Amp (Some few units max). I have bought this unit for my personal use and he no the short durable works time very big. A unit comes with 16mm put, 4 FT Tierra and 6 FT (+) boss of welding that can do a work the little delicate. A cord of supply of the can is not very long neither, as anything upper master weld, need to take a lot near of the yours can outlet, or to the equal that have finalised to do taking the longest bosses.
4 / 5
Very impressed for these pocolos rigs, there is enough the bit of power for his measure my only complaints are 1. Some bosses are too many short an earth clamp is 4 ft long and a stinger is 6 ft long and a cord of the power in a car is roughly 5 ft with a 220v adapter. And 2. A 220v to 110v the the adapter has shipped for separated the witch was the little question but no an end of a world. A car is very impressive this in spite of.
4 / 5
Was very skeptical buying this, but for $129 landed it is cost a risk of mine. I have required something concealed could penetrate deeper that mine 120 Lincoln for reparations of tractor.

Avenges with the 30amp spent of lock of the transfer, opposed the three prong has expected. The good thing has changed was as the connections were inner free of the discharges. All verified out of good.

Are not the welder and has not burned smaw the canes of then done of trade escoles 15 years. Everything is for wirefeee. But this looks to do quite good. I have tried he among the prize of piece 1/8 corner that use some old 7018 canes. It dips accounts a lot thru a amp row. An indicated 140amp burned clean thru a corner. Looking forward to taking any weld time in with him.
The time will say that hard, but at present am impressed.
5 / 5
Has opened a box, at all fraction but has not included this in spite of has the “paper” of RAISIN in a box that says it has been tried. Totally unacceptable that this junk rests to be sold on Amazon. The maintaining has it that sends behind and hope for the repayment, has said 7 days with which receive he lol. So that it piss it was right now! I have had to dip 1 star but he is the z/the zero!
4 / 5
Has had my doubts when I have taken out of a box but surprised when I used it. Have welded In fact a lot of years these small welder blow me was🖒
5 / 5
If you have not listened this first, control an earth. My chance has not been grounded. A grounding the boss was securely fastened to the surface has painted, any earth. I have cleaned of a product in a connection, everything well. A foot of hule the ray was also dangerously close to the manager of joint of the circuit. Another that these details, everything well!
4 / 5
Has been welding for 10 years. He welds very good. To to The This car really likes them a 7018of s. I m using the 30 amp breaker and has not had never a subject. Highly it recommends this product. The and will try any project. It does not take to concerned roughly when be built in Cina or of the discharges comes with. I have built the cord that atasquemos to a car and to cover them to mine t 240v recepical(6-30r believes). It is the 10/3 cord 26ft long. They are not a electriction but with help of Youtube and Google I has had any wiring of question 240v recepical and doing the special cord.
4 / 5
When it has bought this Welder the really has not thought this tiny thing was a lot well. So only I owe that say WOW. It solders sum and very portable. This Welder is on and besides my expectations. The service adds. Fast delivery. A Must HAS !!!!
Thank you
5 / 5
Small takes the soudé works partorisca marvel
and these same of the sud the 120v. With A Roseau E6011
1/8 of thickness this leaves súper well, not having never to used the 240v. Car I all that want to to the sud the 120v. It is súper touch me.
5 / 5
His soude In tabarnac dla 1/8 and more the a lot of satisfied date the glorious father wants to join lucido also 🤩already has tried them this car four 4 hours Strait burning1/8 or 3/32 the at all some diagrams was not even hot with which 4 hours a nowing that and are CWB aprouved loves this tiny car
5 / 5
First of all to the left say me that ossia the company adds to buy of . They are thoughtful and the answered quickly when has any questions or of the worries in a welder. A welder has purchased the works add !! I have it quell'has used so only he for small works like this far but in my opinion was my gone the welder for years to come !!!!!!!!! Thank you Hitbox !!!!!!!!
4 / 5
Has given some stars for a colour, regarding a clave welder is hard to say a car would not go in . Returning tomorrow.
4 / 5
Quite good and useful welder... A boss has broken was but a company has offered the free substitution...
Like this far, like this a lot of
:)
5 / 5
Works well, among exactly when it say it . They are very satisfied with this compraventa for any one thinking roughly buying this element, goes for him. Some cords can be longer this in spite of.
4 / 5
For a prize can not complain, and has been impressed in that a lot he welds.. I welded 1/4 thumb steel with absolutely any question. Highly recommend it to the partner.
5 / 5
Included in 40 amp 220 and 1/8 cane some looks of units under powered a clave in arching
5 / 5
DIRECTED has not done. He any one arch until dipped to 100 amps or more.
5 / 5
The work adds. Small Good arch welder. The only question is period of some bosses. Uses 6011 and 6013 electrodes some better.
5 / 5
Very interesting welder. It covers and wire this come with welder is entirely a wrong measure and type. But wire it up with that wants to and do quite amazing.
5 / 5
Burns 7018 well. Maintain like him standby to run in 8000 generator of watt. If it acts for 1 work is has paid stops.
5 / 5
Has arrived very fast. Looks partorisca be it abonos pocolos welder. I didnt give the plenary 5 stars because minr has arrived with the free ray that goes around inner. It has had I any remarked the , can have shorted around on something inside when into use. You update my description after ive quotes the some career of time.
4 / 5
The work adds for such the small unit. I have had to redo a connection for a cord of electrode like any closure to plant in a inverter.
4 / 5
Some on-line specifications and a specs in a manual does not match up... Cycle to have to that lower and welding amps in a manual
4 / 5
real work a lot using 7014 cane, powerfull ,recomended for use of house hoby
5 / 5
Service and Produced Excellent! Very surprised with this little welder like this far!
4 / 5
Adds pocola what!
Hanged afterwards to at all
now im the professional !
5 / 5
Transmission to have so only were spent for the 30 amp. Canada 220v
5 / 5
Works of small tiny car well . Surprised me!!
Thank you
4 / 5
After months of use, he s really adds, ladies t has included to think two times roughly buying.
5 / 5
Car very small, changes of the discharges and a boss to the pertinent gauge and all the work well! Has the short advantages but the extensions are easy to find.
5 / 5
This welder is surprising!!!! The same welded 3/4" it schemes of steel !!!! The service adds. You recommend this little powerful welder to any one.
Donald
5 / 5
Fantastic little welder partorisca an exposure. They are the certificate welder, and use this lil puppy around the our acreage / material “of cochera”, and building projects of small welding, excellent value partorisca a prize.
5 / 5
Has dipped probably 150-200 lbs of canes in this car and there is not partorisca leave me down. If a defender partorisca cool that it takes stuck or has blocked he wont run.
5 / 5
Quite good. It has had to dip it cover it the common plus on that. Good works.
4 / 5
The test Joins so only and satisfied time L the publication.
5 / 5
Are partorisca focus red welder and has used miller and rucksack of Lincoln fashion welders in a field, and this little welder is like this well if any better. Partorisca 179 bucks take the car of welding that can burn 1/8 7018 in 120An all day long. It comes with it covers it fashionable to close to transfer that I swapped was partorisca the regulate 220V 3 prong discharges. Also it comes with the earth of good quality clamp and clamp fashion stinger with 10' goodness, and the chance partorisca spend. It solders Of rucksack “to appoint” to mark the cars compare in 700-1500. If I take the year out of this car will have paid partorisca he 10 times on. It can a lot of recomend enough.
4 / 5
A general availability of DC-inverter arch welders has done these tools far more abordables that a traditional transformer-has has based unit. This particular model, a ARC200, is the decent small welder and extracted well. It is quite small and light and comes with the stock exchange to spend. Some bosses of welding are removable (his hook to a welder reason look to be very solid interlocking connectors) and a schemes clearly can be used with any polarity, although a together rule on thus type of clave welder probably would be estraight polarity', which has a cane of negative welding and a workpiece positive.
My decision to estimate he in 4 more than 5 stars are based in several characteristics of this welder that thinks could be improved. For example a amp regulating the control there is virtually any control to the turning and is very easy to accidentally clash it and reset he without @giving . One covers to line that comes with a welder, the lockable fijamente to circulate with 3 has twisted leave (a NEMA L6-30P) is not one covers to regulate used for 220 volt welders, at least in some the EUA and Canada. If this welder is any one is first, and so only 220 V, welder then a receptacle of pertinent wall could be installed specifically thus welder. It notes this in spite of that one '30' in a name of one covers informs to a fact that one covers is has estimated described is 30 amps. These goodnesses to the material is a subject of entity with this welder, specifically a cord of line is distributed with. This welder looks to be of the same like another available low cost DC-inverters in that a cord of line uses 14 AWG fine-edge copper bosses. This usually would be considered pertinent for 15 amps, perhaps the little amps more as several factors, but this welder in his maximum start (which is in fact the little down 200 amps) will draw roughly 37 amps, and of course will require for this he 40 amp circuit. A ARC200 when used in full start (180 amps) has 30 has to that it has estimated the cycle and I assume some designers or the constructors have counted in a cord to line that cools was during a pause in welding, no the particular ready hope. Still in a ARC200 100 cycle to have to that (99 amps) a car will be to draw roughly 18 amps and ossia really one overburdens for one 14 cord, although any outrageous. I have decided to substitute a cord of line with 10 AWG with a level 220 V welding spent, the NEMA 6-50P.
In general this DC clave welder can produce quite decent welds and with the variety of diameters of canes of welding until 4.0 mm (5/32 in.).
4 / 5
Wow, This little box there is roughly his punch. When I have opened a container and inspected it a first what that the paste was a measure , is incredibly tiny, likes the toy of the tiny boy.

A Good:
Some bosses and fittings looks really well for the car in this row of prize and has done well on first tries of roughly 12+ 3/32 electrodes (6011, 6013 and 7018). Place to 100 amps has far penetration more orders that a 100AC the diagrams also have. A fast control of current start tip that a current to run is attentive ( has dipped the to 100 amps take 100 while it runs and roughly 116 during initial arch). I have run he in max can in brief but has run mostly in a 100-130 row to try. Any overheating has been remarked but are trace the few unexplained occasions arch cutout. It is hard to say this time but I suspect has been caused by the bad earth in a piece of steel of soiled test like resupplied grounding clamp has the contacts describe very small with a part when using flat plan (can upgrade). A bit the dial does to regulate current easy and attentive.

A Bad:
Here is a reality, the look in an is economic. Some looks of main unit to be very drawn and built but suspect the second company has taken these parts and gathered them for sale in north Amsterdam. A markings in a unit is basic and does not aim a current or voltage of a unit and any security markings so that it does not think that is to say the CSA the agreed element like to be careful during use. Included a bit those that messages of the security on there has grammatical errors that wins the laugh when calm read him.

A main defect in a unit is a cord to be able to. Some looks of boss to be of a wrong gauge. It is estimated in just down 21 amps like this has to that have at least he 12 gauge cord but to to the looks more like 16 of the how is a lot so only for around 10 amps 'officially'. If run a unit in the full power for long periods will heat up and result the fire hazard. Also of the discharges of finals is the pertinent 20One has estimated 220 discharges BUT like such can it a lot of clamp to such the small cord! As such boss/of discharge subtracts unsupported and first time I 'the test tugged it' an of some bosses rasgaron loose of an interior of electrical rays. There is remedied a @@subject before it is critical result but be conscious of the treat first of the use or can have the fire.

In general am pleased to arrive to this point, yes maintains to do and does not take the fire because of some subjects has mentioned thinks that will take my cost of money.

Top Customer Reviews: HITBOX MIG Welding ...

Rating: 4 out of 5 with 6 ratings
5 / 5
The nave was quickly, and works of good torch. It recommends and I will be partorisca buy another punctual , Thank you.
5 / 5
Has ordered this ,,,bad ..
5 / 5
Hands very fast and work a lot
4 / 5
the perfect returns and excellent facts
4 / 5
the gun of substitution Adds partorisca my mig pak 10 perfect record and welds like new again
5 / 5
Deceive

Top Customer Reviews: HITBOX Plasma ...

Rating: 4 out of 5 with 10 ratings
5 / 5
This thing is incredible!! Short by means of 1/2” steel, albeit dulcemente.
Resupplies a long plus touch which give me capacities of better viewing and there was at all bad out of a box.
Has had to that dip the different 220V discharges in owed to the mine recepticle when being different.
And has bought 15 ft of boss of earth to do to to a period still likes him the advantage of torch.
Otherwise Amazing car for a prize!!
4 / 5
Very produced. I have done some Come from of the sud run 220V and the all the works correctly.
Negative points: the manual of the user does not correspond to the product has bought. Lucido Vendor my envoy another manual. This last manual has not gone always a lot The sake.
Has guaranteeed: any to Do of the illusion Of the sud lucido the service down has guaranteeed. Lucido The vendor say that that has a Technical department. Ask lucido Service lucido more near of Montreal, join me has continued or was Montreal. Pair The continuazione, there is apris that he any and has had to that a centre the Vancouver. One you partorisca judge...
4 / 5
A product arrived when expected, as it has described.
Setup Was easy.
Having A regulator of pressure of the integrated air in a unit would be a profit added but his no the question.
Court a lot on 120v in of the thinnest courses, will require to hook the to 220v to maintain to trip breakers, but is for this that have bought the unit that can run on 220v.
4 / 5
Car of quality for the good prize, are so only the hobbyist, welder but really like having the cutter of of plasma and is in enormous prize that is dual voltage . An adjustable amperage leave you vital control of your courses. A measure of a torch of cutter is sum to take to these something where the grinder so only can not take to. Some courses are cleaned, and where want to bear be. I left to penetrate to some depths have required to take the something welded piece of metal without to a lot of harm the underlying structures. A subject only has has had really was a tripping of 20 Amp 115 V) fusible in a same poster in of the levels to start with lower. Have Still for the try on one 220 Volt but hope until punctual. For a prize are very happy with a product and would recommend to friends and family.
5 / 5
Has bought this April of cutter of the Plasma/12/19. I used it two times. I have been to use it today and is not doing. Power the light transmission comes on, but a digital exposure and the defender do not come on. Hmmmm! There is not any fuse that can see of an outside like the question has to that be inside a unit. Need to contact vendor. Life very short! Wow!
4 / 5
Is the decent cutter , the work adds and run súper clean until 3/16'. Yard 1/4' flat, dulcemente and burns a tip on enough well because of a slower speed travesía precise. Calm also can require transmission some 220 discharges viril arrive him concealed comes with him. I have had to that change mine to the level 220 IN discharges He of welding. For a prize this in spite of, am satisfied with a compraventa.
4 / 5
To the arrival has been surprised in as small a cutter of plasma is. A lot of packaged and in good condition, has bought a cutter of plasma to cut 3/16” material for the project am doing on. A CUT40 cutter of the metal does not have any subject with one 3/16” material. Of the point of prize thinks that this was an excellent shot this in spite of. Utilisation this car for hobby to owe light uses one is excellent thus purpose. If you are looking for the car to have to that the heavy commercial applications is is more probably any for you.
Consumables Is easily available in
An only negative part is that I have had to that change one covers. This element is built cost was and calm more probably has to that change of the discharges.
4 / 5
Instructions of assembly and the parts comprised does not match .

Esgulator' First leaks to achieve 40 psi, which doesnt supply quite a lot of to start with cutting pressure.

The tips have comprised is junk.

That says, once using some adapters to hook on a hose my compressor, and using some tips of better quality I dialed this thing to 15 and come from to take my time that cut thriugh some 3/8 steel.

If a costruttore had comprised some better hoses/fittings to attach an air distributes it could be side 3.5 to 4 stars. How it is has have to that the give 3 when so only estimate it 2.5 stars.
4 / 5
Rid quickly, small and light car. The works add severed by means of some 5/8 materials and do a lot well. It runs amiably in the some the usual material likes him 1/4 and 3/ of happy with him like this far....
5 / 5
Really at all to compare it too much? First user of Time. 1/8 it Was quite fast using full amps and 90psi. 1/4inch in the tax of 4 thumbs by minute have had light bevel with minimum dross. The good distance maintained after beginning an arch, consumable the tip was still shiny. With which 10 minutes of Cutting. Decent. A lot of insterested to see yes manages more work..