Trending Circular Saw Accessories Products

What is Circular Saw Accessories?


Top Customer Reviews: Kreg KMA2685 ...

Rating: 4 out of 5 with 19 ratings
1 / 5
It does not recommend this product. Has has had to that return it and take repayment. A lot deceiving of Kreg. In theory, very thought and could have been useful. Has-liked me a relatively simple way that attaches a circulate has seen to a base. Used the once, the unfortunately discover that my yard has not gone properly varied with quell'I has expected ... And that discovers that one Drives has not been square ... And it can not be regulated. Bad manufacture.

Has not taken any casualidad to take another and experience another deception. This in spite of, has given he casualidad the Kreg and has bought an expensive plus Accu-Cut jig. WOW ! Cela One east amazing and loves that. My recommendation : it forgets this one and go with a Accu-Cut, will take all the classes of cut precise do and a lot with accuracy.
4 / 5
Nave very fast. Good addition my box of tool. Easy to dip on (read some instructions in the first place). Can dip it on partorisca right or left-handed operation. It can also dipped the on partorisca leaf in a right side or accident of an engine. It feels quite solid although it is done of plastic... But appearance will not fall it never in my concrete paving as I am sure this will be an expensive deception. It takes the few careers to perfectly regulate a yard with a cursor. My only complaint like this far is a ruler is in of the thumbs so only, any cm. Ossia He soyade in Tool of EUA, but like the Canadian I often measured in cm (says anything master, metric is like this easy to calculate - add, embezzles, divides, multiply - much easier that imperial units with 1/8 and 1/16). Ossia A reason for some 4-stars.
5 / 5
I received it the week or he like this fact, and has taken finally he partorisca moves he in a weekend. It is the little finicky partorisca dip on partorisca the mine circulates has seen at the beginning, but after the pocolos adjustments, reading and rereading some instructions, and the few measures of test, was very partorisca go - probably in the half hour is spent partorisca take the good. Once rasgando, is the sleep partorisca use . It take the number of straight and fast course that has gone perfectly attentive and short work done of some sakes of discharge. I have followed some tips in a youtube video and has situated my materials on 1 fat thumb ridged foams partorisca sustain a work while short and really help. It wants slightly better instructions in a container, but with a device, any qualms anything.
4 / 5
Rid punctually. At all bad with container when I opened it. You use it once, it looks partorisca do a lot well. Little odd taking use partorisca resist one drives as you have cut, but at all really hard so only the bit of retraining to the equal that have cut. Calm really would have to that READ instructions before hooking he up :}. Once I payed the attention to that is to be say partorisca do all has taken roughly 3 min to hook up.

Looking for you something partorisca use to cut strait with east is a tool.
5 / 5
I have used this partorisca a first time today. Usually it uses the 1 x 4 and 2 clamps like the right flange. This tool is easier that my system, which sometimes leaves a fence in my circulate ramp of saws under a flange of a one for four, spoiling a yard. A Kreg poster of frames of drives that the easiest cut and more precise, and am happy has paid for this tool upgrade.
1 / 5
These products would be Or.K. Partorisca Cutting was forest partorisca rough projects like the stand partorisca has beaten of rubbishes etc. This in spite of, doing run of precision, doing with 1/4 thumb or thin plywood, etc. This drives is way too much flimsy to with the accuracy cut the straight line. Partorisca A time takes, use the straight piece of forest and two clamps partorisca the much better drive in any cost.
4 / 5
If it calms of the that has the table has seen ossia the good alternative partorisca small to dip up and easy to use.unvosotros Drive them are metal of the quality but some frames is plastic to regulate not liking some plásticoes of durable more Kreg uses in another must be taken any one the flex the too much.unvosotros Pierce partorisca mount also uses self threading rays that is the will not undress if his take regularly.an the application of a tool is sum but quality of material is half.
5 / 5
Really good to do very run rectum. Like this as well as I can do with the portable table has seen. It uses the joint partorisca sacrifice on some sawhorses he require the very directly cut. I see respect of people of prpers roughly that resists a side of yard etc and one drives but this (joints of sacrifice) will delete this question. Some materials could be better, but partorisca $ 50 I tin a lot he really lacking them still that. The mine is out of square for roughly 1/32' that is not the subject.
3 / 5
A must has tool that is more useful that the table has seen. A main deficit is a quality . It does not seat squared with a circulate saw and a plastic is d has bitten flimsy. My Dewalt 20 v MAX wireless has not seated properly and the additional modification has required to do do. Rasgué The pocolas spent of melamine to 13' band and verified for consistency, and found was the bit was with which roughly 3 run but enough well for a shelf has built. Very better that using the chalkline in wrestling with the full discharge in the small table has seen.
4 / 5
The works add ,looks the little more perfect in of the video, find a program partorisca hold still invernadero does not have a still better pocola annoying partorisca install, but does not complain some writes partorisca build there own, probably would owe that it has done a good east ... It thinks more the people will find well....
5 / 5
Nave very fast. Good addition my box of tool. Easy to dip on (read some instructions in the first place). Can dip it up for right or left-handed operation. It can also dipped the up for leaf in a right side or accident of an engine. It feels quite solid although it is done of plastic... But appearance will not fall it never in my concrete paving as I am sure this will be an expensive deception. It takes the few careers to perfectly regulate a yard with a cursor. My only complaint like this far is a ruler is in of the thumbs so only, any cm. Ossia He soyade in Tool of EUA, but like the Canadian I often measured in cm (says anything master, metric is like this easy to calculate - add, embezzles, divides, multiply - much easier that imperial units with 1/8 and 1/16). Ossia A reason for some 4-stars.
4 / 5
These products would be Or.K. For cutting was forest for rough projects to the equal that was still has beaten of rubbishes etc. This in spite of, doing run of precision, doing with 1/4 thumb or thin plywood, etc. This drives is way too flimsy to with the accuracy cut the straight line. For a time takes, use the straight piece of forest and two clamps for the much better drive in any cost.
5 / 5
Calms of the that has the table has seen ossia the good alternative for small to dip up and easy to use.unvosotros Drive them are metal of the quality but some frames is plastic to regulate not liking some plásticoes of durable more Kreg uses in another must be taken any to flex the too much.unvosotros Holes to mount also uses self threading rays that is the will not undress if his take regularly.an the application of a tool is sum but quality of material is half.
4 / 5
There is rid punctually. At all bad with container when I opened it. You use it once, it looks to do a lot well. Little odd taking use to resist one drives as you have cut, but at all really hard so only the bit of retraining to the equal that has cut. Calm really would have to that READ first instructions of hooking he up :}. Once I payed the attention to that is to be say to do all has taken roughly 3 min to hook up.

Looking for you something to use to cut strait with east is a tool.
4 / 5
Received it the week or he like this fact, and has taken finally he partorisca moves he in a weekend. It is the little finicky to dip up for the mine circulates has seen at the beginning, but after the pocolos adjustments, reading and rereading some instructions, and the few measures of test, was well to go - probably in the half hour is spent to take the good. Once rasgando, is the sleep to use . It take the number of straight and fast course that has gone perfectly attentive and short work done of some sakes of discharge. I have followed some tips in a youtube video and has situated my materials on 1 fat thumb ridged foam to sustain a work while short and really helps. Master slightly better instructions in a container, but with a device, any qualms anything.
4 / 5
Really good to do very run rectum. Like this as well as I can do with the portable table has seen. It uses the joint to sacrifice on some sawhorses he require the very directly cut. I see respect of people of prpers roughly that resists a side of yard etc and one drives but this (joints of sacrifice) will delete this question. Some materials could be better, but for $ 50 I tin a lot he really lacking them still that. The mine is out of square for roughly 1/32' that is not the subject.
5 / 5
Theoretically has to that be the tool adds , and do quite well after a tedious neighbour up .... But it feels like this flimsy like his in disposal to break in a next yard... Perhaps thats reason Im that use the full measure Makita circular invernadero
also finds a gauge hard to see like this taking covered in sawdust easily also he very rigid to slide a gauge, Goes like to be able to go of 20' cut to 12' the yard without that has to that first the swipe was and clean a clue
His well for rough cutting and I arrival in saw them of table - but was well to have a confidence in this accuracy of unit but I of the one who
5 / 5
has used this for a first time today. Usually it uses the 1 x 4 and 2 clamps like the right flange. This tool is easier that my system, which sometimes leaves a fence my circulate ramp of saws under a flange of a one for four, spoiling a yard. A Kreg poster of frames of drives that the easiest cut and more precise, and am happy has paid for this tool upgrade.
5 / 5
A must has tool that is more useful that the table has seen. A main deficit is a quality . It does not seat squared with a circulate saw and a plastic is d has bitten flimsy. Mina Dewalt 20 v MAX wireless has not seated properly and the additional modification has required to do do. Rasgué The pocolas spend of melamine to 13' band and verified for consistency, and found was the bit was with which roughly 3 run but enough well for a shelf has built. Very better that using it chalkline in wrestling with the full discharge in the small table has seen.

Top Customer Reviews: BLACK+DECKER ...

Rating: 4 out of 5 with 22 ratings
5 / 5
The saws circulate is one of some the majority of tools of entities in yours toolbox. Has 4 of them, because they can be place on partorisca multiple works, with different leaves, etc.... It likes-me the light model partorisca frequent use, a big and more professional plus some can weigh the plot, This one continuous in mine kregg drives, partorisca leave riping and crosscutting operations.
4 / 5
My last Black and Decker circulates has seen lasted eight years until (I think) a finally burned engine has spent of abuse and prolonged use. This late plus one has a characteristic of laser, which have not used still. The majority of gain is some additional leaves that show one has feigned material to be sawed. Like an occasional user does not have to that maintain that it runs to a tent partorisca new leaves. Altogether This invernadero are adds partorisca backyard works in spite of critic of some professionals.
5 / 5
Excellent tool. It has used the plot of B & D tools and has a lot of satisfied state with everything of them
5 / 5
a lot well has seen partorisca my diy projects. It is described like this, well has packed. Fast nave. I have had to that regulate an indicator of laser because it was way of. But beside that is well.
5 / 5
Really happy with this mark. I'v always remained out of these types of things. Bough This and the black and decker ELECTRICAL chainsaw haha. Any one @subjects at all for use of house.
Would not use this for work but for home uses ossia perfect.
1 / 5
Any very at all, have used 2 days and a bearings is spent already, no spent to Please
1 / 5
Any very big quality, leaf warped when it take heat. Curve of drive easy and the directly short frames difficult. Any economic was, buy the best a!!
1 / 5
I have known even any to expect a lot he, this in spite of him not even directly on-line walk. It does not squander your money he.
5 / 5
One has seen the program is not quite robust. This does not leave to do run rectum.
2 / 5
Really happy with this mark. I'v always remained out of these types of things. Bough This and the black and decker ELECTRICAL chainsaw haha. Any one @subjects at all for use of house.
Would not use this for work but for home uses ossia perfect.
5 / 5
Any very at all, has used 2 days and a bearings is spent already, no spent to Please
5 / 5
Has known even any to expect a lot he, this in spite of him not even directly on-line walk. It does not squander your money he.
5 / 5
The well has seen for a prize if any one calms that has to that do daily.
5 / 5
Light, Simple of utilisation and effective cup. Excellent circulates has seen Games bricoleurs of the Sunday.
5 / 5
luv Buys better leaves partorisca he and is awesome
5 / 5
has produced Adds. So only it likes it it has on grown with when my grandfather and my dad renewed and building coverages.
4 / 5
Better circulates has seen partorisca a prize, materials of big quality, drives of laser adds.
4 / 5
Very happy with east buys quality a lot well the products highly recommend
5 / 5
I did not use it still but can ensure you they are already disappointed in a product! It is obviously state used before. It is hard of the say a photo but has been covered in invernadero powder when I have taken was if a box, one invernadero is all shabby and marked and a leaf suffers harm.

Ridiculous. Seriously it does not recommend .
5 / 5
Has to that very light to the skill has seen. More like the toy.
Sends behind but too much question.
5 / 5
Has Had to join these saws partorisca roughly a year -- maded a short today and then invernadero would not begin again --
the electricity and the cord of extension is well with other tools - I thinks that is partorisca say simply poor quality and the hassel partorisca return etc
4 / 5
Want to this has seen! A laser the easy fact to use. It is light also!

Top Customer Reviews: Circular Saw, ...

Rating: 4 out of 5 with 39 ratings
5 / 5
Your browser does not sustain HTML5 video. Ossia The very decent mini scircular has seen partorisca a prize, no too heavy, three leaves comprises, alignment of laser and easy to use. Changing the type of leaf has taken roughly 1 min. am using he partorisca cutting small piece of forest for now and is a lot handy partorisca that, any need to use my big table. I can be you use easily in a delivery. Partorisca This prize, is the good value .
4 / 5
Has the big question with this car, a trigger of the security no properly, while I need uses it, has to press a pin of security with my toe, reason a lock does not pull enough, this caused big questions, could does not use a legislation cerra because of that. I am thinking of the turn, looks good but this question is very complicated, he the practically impossible fact to use.
4 / 5
Doing renewal to house this jump has decided like this to buy this. A prize looks decent for all can do. Has four annexes that can be used for forest, tiles, plastic and metal. Done some cupboards of storage of the cochera and he he easy using these. An integrated laser is a lot of gain for drive straight in that need to be cut. Has dish to spend so it can say his really sturdy and has to that it has weighed. The boss is done of hule to the equal that sweats a lot easily slips although you are using a hand for the operate. A key of security is the characteristic good to do sure calm a lot of calm hurt accidentally. Very easy to gather out of a box. Has the vacuum also for working spatial net especially when you are cutting forest . Happy to having given this tries it, will be a lot of gain for all my projects.
5 / 5
Used it already a lot the time received it of then, which is the good signal . At present we are doing the pairs improve smaller in our house and I often owe that cut down small pieces of forests, especially baseboard pieces and round of neighbourhood.

Is much faster (and, will admit, less scary) to take this small invernadero was and to pack it behind on with which to use our table has seen, which always done the disorder and is not that I add for the smallest pieces. It is also convenient to be able of the movement around a house with us when we are doing in of the different rooms in planting that they have to that go back our cochera every time has something to cut. An only downside is that I wish a cord to be able to the was bit it longer, but ossia often a chance with tools to be able to and so only can use a cord of extension in all the chance.

Ossia Easy to manage of then is not weighed too much, looks quite durable and seat to like me there is more control in a yard that when I am using the big plus has seen. They are so only be using it to cut forest for a moment, but appreciate a fact that has come he with two extra leaves to cut metal and ceramic tiles, which probably will go in handy to the equal that move on to other renewals the after being.
4 / 5
My indicator of depth has been broken to the arrival but I have required one has seen as it would not return it he so that it could depth put of still adjustment. WITH: (1) A bit uncomfortable to submerge when beginning a yard. A @@@knob to take a front would be handy. (2) I Individual leaves are not easily available. It would like to find 42 and 60 carbide of tooth the forest that short leaves.
PRO: (1) point of Excellent prize, good value. (2) it Runs decent Easy on 3/4 pasador knotty but would prefer the finest leaf. (3) light Weight
IN GENERAL: I have not had any question that use a transmission to start with of the security. A transmission of security can be liberto calm once begins one submerges he so that has any need of the resist on for a whole yard. I remark complaints in of the this; perhaps my model is newer and has improved. It recommends this element for work of hobby.
5 / 5
With a thumb of the cutting depth has not known that the use would exit of of the this has seen. But there is @@give quickly that the majority of a forest I yard is under a thumb anyways!

An use adds of this saw is to take averts pallet forest. Any sure if any of you has tried taking pallet the forests averts with the crowbar, but is at least ten fast times and easier that do he with east has seen.

Really a lot that has extra leaves for different types of materials. Also it appreciates a guard of security and keys of security. Them me sure to use with a delivery.

Comes with Allen yours to use to change some leaves, easy to unscrew, leaves of transmission and king-ray he.
4 / 5
Your browser does not sustain HTML5 video. This invernadero is all of its own for professional use and any professional, comes with 3 leaves for almost all the type of the materials that cut, a leaf has lock of security and not being able to exit without grap a key to backward and upload your hand in a car that the very sure fact to be used and tent in a house, there is also governs it of the laser built in a car and very easy to change to on and era.
5 / 5
This circulates has seen laws very strong enough. Very easy to use it even although his first time. A lot attentive gain and value for a money. I have found that a grip is very comfortable. There is laser to mark in a thing. And his very easy to clean on with which reason some powders spend for some legislations of hose to a stock exchange of rubbish. If rings one circulate has seen for your project, ossia a one for your project of house. Highly it recommends for some people.
5 / 5
Your browser does not sustain HTML5 video. Like the present, has bought this for dad for his work of renewal of the house of then has to that visit other houses to complete renewals of house for cookery, living room, or bath. It enjoys one invernadero and has begun to use the frequently. Occasionally need of elements to be purchased after visiting a place because of insufficient information of client or underlying conditions that needs to be treated in the timely fashion. This mini invernadero results handy in chance that a need of cutting tasks to be facts on place. Ossia Quite light compared to some cutters of traditional saws, and can be added to one of some tools in a car without taking a lot of space. One invernadero is quite responsive and easy to use. Also it comes with additional leaves that is useful when I need to be substituted. A boss is also ergonomic how is easy to manoeuvre. We use a mini has seen to cut the joint and concealed can be quite cut to a flange of a joint, with a help of a ruler to measure in a tip to ensure accuracy, in both cm and thumbs. A characteristic of the security of a invernadero is sufficient to the equal that has the mechanism to close to ensure the leaves are sure in place.
4 / 5
Awesome Has little seen . I have required of smaller invernadero for cutting tile with backing in the and this has done swimmingly. A leisure is attentive and brilliant and comes with 2 battery of substitution . A transmission of leaf is quickly and easy . A trigger has to that lock of good security also . It comes with three leaves also like your loans to go rights out of a door .
4 / 5
I have gone to his web of place and tried partorisca register one has seen under a tab of Registration of the Product..... Error404 Looks; esorry, a page has asked there is not '.
Has sent diverse email with my worry and like this far any response!
Any sure if a company with response inclusa has had the question with one has seen for subjects of guarantee..
Are quell'has bitten unsure in of the this has seen!
Did not use It still, but a costruttore is not trusting the my emails..?? A bit confusing..??
5 / 5
Your browser does not sustain HTML5 video. I have received my containers yesterday, has not used It still, am satisfied, touches the instant of the general appearance of the product but alas drive of the depth does not operate , any fijamente at all, has need of of the east has seen the fin of next week, would want to know if he and centre he of the service touches this tool in Montreal?
Thank you
André Gaudreault
5 / 5
has bought this cutter for my mamma, and the work adds except a fact that a laser does not operate, which bondadoso to suck reason a better part in this car was that it was abordable with the laser and theres any while a scheme self is attentive, easy to use and theres any vibration when I cut it compared to other cars that vibrates your eyeballs in there sockets and cause crappy run.
5 / 5
This little invernadero are adds. Quite light and easy to operate. One drives of the laser is not in accordance with a notch so that it was bit it delicate to adapt to. And another subject is a selector of depth toggle. It is plastic and does not resist where calm dipped that. It remains quite free. That, as that is doing on could be the little dangerous. But for me I have taken so only used to cutting all has done on in a maximum depth.
Like the few things that could improve, but still happy on everything.
5 / 5
Bulky sleeve, is kinda uncomfortable to take to. A depth adjuster is a lot of flimsy and plastic - I feels goes to break any day now...

Cut directly. Nizza To have laser.
5 / 5
Used it to cut a plywood for a insulated marries of dog. Cut any initial plywood with skill circulates to regulate invernadero and a rest was considerably easier with this saw - lighter that manage and still yard cleanly.
4 / 5
The product is described like this. Different another, has not had any subjects with an on/was the transmission but I can remark it pode any last of era for the use in the daily base
5 / 5
A date gauge there is prendido to resist in place after the pair of short uses. Quite disappointed considering used it so only to cut 12 feet 1/2 in forests. A gauge for a height no longer works.
5 / 5
Mangos good and good course. Like an option of drive of the laser. I have had to file down some external flanges of a down plastic toe that presiona tab to dip depth of saw - was too tight to easily place. Wished this invernadero come with to to the the boss likes in grinder of of small disk. Added my typical of helping in bylines and run of control.
4 / 5
Had impressed enough. Still it has the laser in the which there is not remarked when I have purchased. Handy Little unit for fast courses. Used this for flooring
4 / 5
Like the Description, a lot sécuritaire, short very good and of precision
4 / 5
is coming on sale so only when it looked partorisca buy a partorisca my workshop.
4 / 5
Does well, need the hand in bylines to cut the straight line.
4 / 5
Downfall Is a way of sleeve the thickness, exactly like this announced
5 / 5
the laser has died any time and depth gauge is hard to do with and faulty

As for an email was partorisca suppose to receive the at all still substitution
5 / 5
The leaf that the bad installed houses, contact of frames of the leaf, therefore it will not actuate .
4 / 5
It is it adds it quell'has seen. Abundance of power in the small container.
5 / 5
Like the Description, a lot sécuritaire, cut a lot good and of precision
5 / 5
The laser has died any time and depth gauge is hard to do with and faulty

As for an email was partorisca suppose to receive the substitution at all still
5 / 5
the leaf that the bad installed houses, contact of frames of the leaf, therefore it will not actuate .
4 / 5
A date gauge there is prendido partorisca resist in place after the pair of short uses. Quite disappointed considering used it so only to cut 12 feet 1/2 in forests. A gauge for a height no longer works.
4 / 5
Manages good and good course. Like an option of drive of the laser. I have had to file down some external flanges of a down plastic toe that presiona tab to dip depth of saw - was too tight to easily place. Wished this invernadero come with to to the the boss likes in grinder of of small disk. Added my typical of helping in bylines and run of control.
4 / 5
Game lucido prize, is badly well,
tried It of the sud lucido ceramic, cut a lot well,
the Practical game gives small works that does not need to exit the heavy machinery
Luz and the simple use touches a bricoleur any expérimenté
Lucido the laser leaves a lot of
5 / 5
Adds has little seen, the better characteristic is an adjustable cutting depth which can be handy when rasgando out of drywall without cutting to a wall studs. Had a subject with a allen scrapes that I control down a leaf, and has cured of me immediately. Spent with confidence.
4 / 5
A light of leaves of lasers to do inside a first week.
An accuracy has not been well. You owe that resist he with two hands when that cut, he the hard fact to take the right yard. I will spend the little more money and take the more has seen.
4 / 5
The guard of leaf prevents to see your cut a lot last to be attentive, some leaves have come with east craps, dulls a lot quickly.
4 / 5
With A boyau aspirador to the extreme cut gyps joins marvel without powder.
5 / 5
Has done The Acquisition of this compress invernadero the game gives concrete works.
Some difficulties with The apresamiento in Main... Question of habit, supposes.
A lot very shabby.
4 / 5
Has not used still to well enough to comment roughly that. It is the handy little car. It likes.

Top Customer Reviews: Bora NGX Saw Plate ...

Rating: 4 out of 5 with 15 ratings
5 / 5
This produces a good, but no the work adds in of the straight courses and and absolutely horrible work in of the courses of crosses. In the first place, I have found partorisca a prize this 'tool' is done of flimsy, brittle plastic and my Makita to the skill has seen never return all this sake. Secondly, A sled any slide in a clue smoothly and tends to 'take' in some joints of clue. Finally, partorisca some reason could not imagine was, this device does not leave partorisca any cross that cut. You grieve the tests use this against a grain of forest, (in mine plywood of chance) take the wry, wavy has cut. I have used this tool with Bora clue. Save your money and spend more in the clue consecrated has seen.
4 / 5
Has bought this partorisca do run & clean rectum on shelf of melamine. Some premiers pocolos ran have resulted utmost!

Has cut yesterday the stack of 6 external shelves in a sun, and has discovered that they were way was and ravens. It results that some tips of hule in a clamps and some touches of traction in a dish no well when they take warm.

Has verified that all three clamps was a lot of and tight, and has tried again -- one saw still roams around. Have take all 3 of these clamps, and has has modified instead a dish of the base of mine has seen partorisca have four 10-32 ray of holes of car that rows with holes that there is drilled by means of a Bora flat.

Like this folks, the mixed description is one . A way this dish maintains a invernadero sure in NGX the clue is SUM , but these clamps and games of the traction really no when they take warm (hot sunny day). It has squandered the plot to time partorisca modify my invernadero and this Bora flat partorisca take the one of confidence invernadero dipped, and now has to that rework the stack of shelves that does not return in our alcove of Pantry.
5 / 5
So only can speak the global construction and fitment/compatibility how was unable of the take is trace on any of mine saw circulates.

A Good
+ Solid build
+ Sturdy, satisfyingly sure clamps
+ Reverseable partorisca of the sud paw saws

A No Like this Good
- Accesses so only the small subset of saws
- Clamps is too bulky to return
- the Oldest creation (544006) with 2 front and 1 side clamps is more universally compatible

has Tried on: Makita 5007MGA, the much older Skilsaw

- A clamps interferes with a depth/miter closing crowbars in a Makita, so only a front and front lateralmente some can find purchase the all, and with a limited spatial available and a 'waffle' the creation of a base the fact nye-in impossible. A Makita 5007FA with his base of flat steel and the crowbars the small plus probably returns better.
- A Skilsaw the just paving was do not actuate anywhere a side clamps can achieve.

These saws of precise version bases that is a) entirely flat steel , rectangular and b) at least a thumb of clearance among a base and house of engine.
Am returned this for transmission with an old plus, less expensive for half, Bora 544006 in of the hopes will return my Makita 2007MGA (. Precious)
4 / 5
have the accident rid Bosch ossia quite new. These works of units for both lefts and rights, calm so only has to that move a clamp around. Two subjects of entities; 1. These bows in a clue, any one everywhere but enough that it is the big question . This means does the repeatability subject during manufacturing. 2. I have not been able to cut by means of the 2'x6' near. It is coming on roughly 1/8' short. Quite big lose in a creation partorisca east to spend. Quite unsatisfied with a system of drives.
5 / 5
Has not resisted has seen securely or with accuracy. Moved into use. No for each has seen, particularly the Dewalt 7 1/4'. Flimsy Construction. Anti rotate For dice of the retention no of the Just transfers. It would owe that it has known it plastic construction the economic Chinese would not be the robust creation or produced useful. It could you do not say if the work or the Dump of no. have maintained moving leaving for a terrible yard. NGX 90° Add-on to one drives of clue is the complete fails also. Not squaring unless used in the register . Inaccurate To 1/16' for feet. (=1/4' On 48' wide discharge of material) Sad to admit it Kreg the master cutting box is an upper plastic tool Chinese economic. Bora Is not for any one looking for accuracy. Or speed. Or durability.
5 / 5
A coverage is quite flimsy and easily distorted so that he a lot of slide smoothly in a clue. A clamps is total junk. They have not resisted my Dewalt wireless invernadero in situating even when enough pressure is applied so that it could not be liberto. I fashioned some strap clamps ossia simple and the law adds. Utilisation a Bora clamps like stops of location so only. After my king-engineering, some works of the system cost to break down sakes to cover that will be king-sawn later in a table has seen.
5 / 5
No my Makita circulates has seen. Sure it has seen partorisca stuff, interferes with depth and adjustments of corner.
4 / 5
This thing is Dangerous, with which one invernadero is exited of a plastic clamps while into use, was fiddling with reattaching one has seen to a dish when have @to @give One invernadero was still plugged in & my hands were there was where something terrible could spend ! Sending this poor quality, overpriced piece of %^ plastic behind ! Works of clue a lot quite but ossia the waste of time & of money.
4 / 5
This does not locate my Milwaukee M18 the FUEL circulates has seen, a clamps is not in some right places and does not leave for the big quite clamp. A more was able of the take is the trace was crooked. The done for the terrible yard with a NGX drive. I have decided the nix a invernadero flat and so only run a circulate has seen against a NGX drive which has done very better.
5 / 5
I have purchased a Bora NGX bordos right clamp and one invernadero drives the discharges of desglosa of plywood. I found it very useful and quickly. It is more portable that my clue has seen. If you are careful that can be quite attentive. For the majority of work of cupboard I discharge of desglosen sakes with a Bora and use my table has seen to spend a part to final measure. It is the very useful and cost effective addition my tent.
5 / 5
A subject main has had them with east was one has seen has maintained that slips in a dish. clamps Has not gone enough enough for the resist quickly in place.
5 / 5
Finicky To regulate, and does not remain regulated. Any value a hassle.
5 / 5
Does not locate well to the mine has seen. A milwaukee m18 fuel.
5 / 5
Taking, is flimsy, and is an only product in a planet that requires a allen English tone to regulate concealed does not comprise one. Such the stupid detail, but in the house with 40 allen wrenches, Any of them is returned this thing. Ridiculous.
4 / 5
Needs the better creation to resist one has seen in place. When I bows of the sled in a right and calm flange has to that extra of the push in a saw you run a risk of a has seen exited of alignment with a sled.

Top Customer Reviews: Makita 194368-5 ...

Rating: 4 out of 5 with 14 ratings
4 / 5
It was impressed like this with cost of mine of a SP6000X2 container that has bought this 55' drives also. It has had still a better pricing and free nave. This drives short has done like this very like this more along 118' drives.
4 / 5
Light, easy to dip was and cut the straight line so only sure adds 1/8” partorisca a leaf.
4 / 5
Wants to this drives. Marcos crosscutting sakes of discharge, joints of coverage, etc. Easy and with an utmost in accuracy. Highly recommend.
4 / 5
Directly and true quality , the sum and the prize add.
5 / 5
They are the random house DIYer has chosen like this on one a lot abordable WEN CT1065 the saws of clue and was happy to see is perfectly compatible with this Makita clues (that it was it to a lot of very revised clue). A clue is abordable and very built - I also would recommend to add a clamps yours orders also to the equal that am so only very sure as sure they are with some tampons in a fund of a holding of clue situates when I require absolute precision!

My only disappointment is that it would like to buy the second clue and join he with east a partorisca 8' the course of tears of the discharge, but Makita has done a small joiner drives some absolute TEARS Out of the prize in for the half a prize of a clue he partorisca some two small pieces of metal partorisca join he with another!
5 / 5
Has bought this drives of drives together with an adapter partorisca mine circulates has seen. His seamlessly and mark almost ran perfect. Very happy with the cost but the just desire could be more economic.
5 / 5
Was impressed like this with cost of mine of a SP6000X2 container that has bought this 55' drives also. It has had still a better pricing and free nave. This drives short has done like this very like this more along 118' drives.
4 / 5
The short constant each alone time! It possesses like this festool and makita. It would choose makita was to require another. Always solid tools of makita!
5 / 5
Luz, easy to dip was and cut the straight line so only sure adds 1/8” for a leaf.
5 / 5
Good value and do a work of cutting on sakes to cover the easiest plot as well as attentive
4 / 5
Genuine Makita drive, a lot of packaged and quite priced.
4 / 5
Amur This drives. Marcos crosscutting sakes of discharge, joints of coverage, etc. Easy and with an utmost in accuracy. Highly recommend.
5 / 5
Right and true quality , the sum and the prize adds.
5 / 5
Good quality, but after using he partorisca the pair projects a fact that is so only a sided the operation is annoying- a Dewalt can be used of both sides.

Top Customer Reviews: Kreg KMA3700 ...

Rating: 4 out of 5 with 11 ratings
5 / 5
A lot disappointed Touches precision lateralmente,he and the lousse among him chariot and his drive. Him. Chariot Right-winger of movement The left of 1/8'. Besides , you saw it it is retained so only with 2. Tip To the sud the prime retains the arriè the failure has sawed tip relatively strong but view that he chariot is in plastic,he . It do not think that plastic goes resisted very long. Had already Some Drive of cup very simple,wished more than Precision but would have has had to that go with my première creates: shabby invernadero plongeante drive of the sud of Good quality without speaking gives band anti derapante,a casualidad that. I have bought His Clip of retained.
5 / 5
When I Take this , a setup is quite simple. That has launched me for the bit of the loop was when he has suggested that for a setup precise leave one has seen cut a blue plastic band has added so only. It seats this in spite of while it calms is not using he with more than one has seen. The calm supposition can be able to buy the substitution launches plastic taken the new has seen. Having a has seen cut a sale this in spite of, tip exactly where a forest goes to be down cut. It finds this in spite of that that can be bit it delicate to maintain a flange in a line during the yard. I finalise to be maintaining an eye in the like this short and the stop that cut to realign a flange. A realignment is minimum and some results are quite good. As it dip the mine circulates has seen up for a night, has considered to take a sled was, but has then thought, 'when it does not use this?'. It was in the mine has seen until it finds the good response to this question, loves it.
4 / 5
Apres 20 cups and have presionar of the best that Pode with a toutnevis the accidents pour them allen. He And in leaves He 5 to fall. I have him substitute the pair gives has seen that they can be aimed with has joined tones allen, bcp solider in this way. The reason dipped Gives has seen stars? It joins key allen ca coute almost at all
Mina of the 10/24 1/4 ‘' with boss allen
5 / 5
Extremely happy with my compraventa. It would be necessary has it shopping the fact of long time. As remarked in of the descriptions, has some game among a sled and clues but for more than the courses does not import . A game can be deleted using 423-10 UHMW Tape of Polyethylene (video on Youtube).
5 / 5
Like this far like this well , help cut the right flange by means of 2' arce thick solid slab when be used for the table
4 / 5
awesome the box of saws of the clue,, used it partorisca join up 5 2' often Black Cherrywood dining table slabs.
4 / 5
When you Take this , a setup is quite simple. That has launched me for the bit of the loop was when he has suggested that for a setup precise leave one has seen cut a blue plastic band has added so only. It seats this in spite of while it calms is not using he with more than one has seen. The calm supposition can be able to buy the substitution launches plastic taken the new has seen. Having a has seen cut a sale this in spite of, tip exactly where a forest goes to be down cut. It finds this in spite of that that can be bit it delicate to maintain a flange in a line during the yard. I finalise to be maintaining an eye in the like this short and the stop that cut to realign a flange. A realignment is minimum and some results are quite good. As it dip the mine circulates has seen up for a night, has considered to take a sled was, but has then thought, 'when it does not use this?'. It was in the mine has seen until it finds the good response to this question, loves it.
4 / 5
Extremely happy with cost of mine. It would be necessary has it shopping the fact of long time. As remarked in of the descriptions, has some game among a sled and clues but for more than the courses does not import . A game can be deleted using 423-10 UHMW Tape of Polyethylene (video on Youtube).
5 / 5
Is true of the games of indispensable tool cut precisely a poster of 4 x 8 feet. His cup is very precise and rights that with the Utilisation of a bank of the manufacture of the cupboard or another piece of furniture is indispensable.
4 / 5
Has on dipped was really easy. My subject was a wiggle space of the room where saw and the plastic slide fulfils some clues can cause subjects of accuracy
5 / 5
awesome the box of saws of the clue,, used it to join up 5 2' often Black Cherrywood dining table slabs.

Top Customer Reviews: Makita 164095-8 Rip ...

Rating: 4 out of 5 with 19 ratings
5 / 5
Bought this partorisca use in the Ryobi circulates has seen. It has taken the small regulating in the mine has seen, like this makita the fence of tip was 1mm too fat. I took it once installed, the law adds. It runs directly, rasga quickly.
4 / 5
His well but way too short. It does not have some real dimensions manually but believe is roughly 8' of cutting period.
4 / 5
The majority of the tents have not spent drive them cutting that says that there is no generic a.
Has found this an on-line and is partorisca my makita invernadero and returns perfectly.
5 / 5
The fantastic element drawn partorisca rasgar forest of the sure width. They are by train partorisca use he partorisca rasgar near of fence. He perfectly!
4 / 5
I use it on Milwaukee the skill of battery has seen.
4 / 5
These have done well partorisca we ... They Like him .. We use these in our Identical wireless
4 / 5
to Some works of to the product exactly likes to of him has to that. You are the decent prize and looked enough quickly. I access my invernadero perfectly!
4 / 5
I access my makita has seen well. Any question and the good prize.
4 / 5
I have been using this fence of tear partorisca the few weeks now and is state adds. It is basically so only the bar of metal that slides to a baseplate of your invernadero and leave you partorisca drive your yard to the long of a flange partorisca exist. A distance is the little short (8') but was any plus along this would not be like this easy to install and regulate. The tool really adds when repeating the number of alike courses.
4 / 5
Has bought this partorisca use in the Ryobi circulates has seen. It has taken the small regulating in the mine has seen, like this makita the fence of tip was 1mm too fat. I took it once installed, the law adds. It runs directly, rasga quickly.
4 / 5
These have done well partorisca we ... They Like him .. We use these in our wireless saws
4 / 5
Returns my makita has seen well. Any question and the good prize.
5 / 5
To Some works of to the product exactly likes to of him has to that. You are the decent prize and looked enough quickly. I access my invernadero perfectly!
4 / 5
This rasga to the fence was perfect for ease of use. He aided a lot finalise my project.
4 / 5
You so only what that annoy is a fact that Makita, with which a lot of years to comprise this element in his boxes, has decided was the good idea to take boxes.
5 / 5
Well access manufactured , perfect for my wireless makita skillsaw
4 / 5
I access my milwaukee 6 1/2 wireless saws the quality adds , good metal, does not feel flimsy
4 / 5
the works like the fence owe that, does not come with ray partorisca presionar and control in place, the smallest inconvenience
4 / 5
This was a right fence partorisca east has seen , are am very happy with him

Top Customer Reviews: Bora Saw Plate – ...

Rating: 5 out of 5 with 1 ratings
5 / 5
Calm once spend some time partorisca use this does quite well for one the majority to separate although for some reason while you are taking to an end of a cut backs a sliding course down and forcing you to press harder.

Top Customer Reviews: Prazi USA PR2700 ...

Rating: 4 out of 5 with 5 ratings
4 / 5
I produce it adds. Works as it has expected. It maintains the tight canal and lubricated and will do a work.
5 / 5
Has been missing partorisca give me pieces of the cashier that Joins it to me envoy and lucido manufacturer me it to him arrives directly.
Service very good and produced a lot very
5 / 5
has Purchased partorisca attach to the DeWalt DWE575 the right hand has seen. The costruttore has declared the trace to a invernadero but 'differently'. The picture has sent. 'Differently' it means a mountain of tool clamps to a footplate slide of adjustment more than line by means of him because some two part do not touch when a bar is parallel to a footplate. I have not been comfortable with such the dangerous tool with only a solid of point of contact maquinal. Added the short dish with the ray partorisca connect a tool by means of a slide of adjustment and some works of tool properly and is much more sure. Be poised partorisca modify yours has seen in some way to accommodate one is turn all' the claim. Once without accidents is trace operates like this announced and does the good work. It does not expect the arrival cut of the chainsaw, this in spite of a yard is more than acceptable partorisca a cost of a tool. Spray A canal with oil or silicone each little run and work properly. Easy on/has been after a first mountain. Good quality of material, access and arrival. Appearance a tool to last partorisca the long time. It would give 4 1/2 stars but no an option.
4 / 5
The product adds, so only downfall is said would return it my Dewalt 7-1/4” invernadero but some groups in a Prazil there is not matched up with a invernadero properly has to that way that has had to that fabricate quell'groups new
5 / 5
the work adds! Highly reccomend. We use partorisca cutting 8x8s.