10 Best Bar Clamps -

Top Customer Reviews

Top Customer Reviews: IRWIN Quick-Grip ...

Rating: 4 out of 5 with 43 ratings
5 / 5
Fashionable name: Rule Clamp A clamps is very easy to use, his clamp a lot well, is a lot adjustable, and is built quite strong and sturdy.

There is not reading a listing properly and has assumed this was the together of two smaller clamps and two big some. As it declares, it is the together of four smaller clamps. No really a subject of closing can use everything of a clamps, is so only that has required two big some also! I have purchased this for 3600 cents with free shipping so many was still value he.
5 / 5
Fashionable name: Regulate Clamp I really like these pocolos clamps! Has another Irwin clamps concealed sold me on a mark, as when I have required some pocolos some these were that it has bought! I have required 4, as it was quite convenient to be able to buy to 4 band! They are quite strong for his measure, and same when calm his those that resists in max emission to force easily. I used him to resist down the cutting joint to take he of cupping when it was gluing he up. Thus purpose was perfect. Irwin clamps Will continue to be my gone to take all my forest that need of laws!
4 / 5
Fashionable name: Rule Clamp has taken these clamps because the type can any never have too many clamps! ;-) These are in a short side BUT can be modified for easily take some nails partorisca insert the flat bars longer. They resist tight and took him so only partorisca time partorisca my next forest working project. They are the real improvement in my ray of 30 years clamps ossia gungy now.
5 / 5
Fashionable name: Rule Clamp These clamps is quite big to maintain things in situating while not taking situates it and heavy. They are to have to that light but very good to have manually when I need to maintain the things ensure. The value adds, can buy another together to continue the hand am building projects more ambitious or doing more gluing.
4 / 5
Fashionable name: Rule Clamp These are utmost clamps and that it is more is a price partorisca 4 of them. A worse part was that I have tried to take them out of a container without destroying a container in chance has had to them that send them behind sadly has to that appeal to the knife but happy will not be sending them behind.
4 / 5
Fashionable name: Rule Clamp Mini 4 pieces of irwin clamp. I have ordered yesterday midday. It arrives in mine curb today when have despertador up. It says contact of tongue of the hule, but is material very hard in a zone of tongue of the contact. The the suspect could be plastic. I have tried clamp 1x2 two pieces of the forest have jointed, returns well and resist a forest sturdy. I am planning to do hardwood flooring. Hope A surface will resist a prefinished hardwood material of good paving. I will feed behind when beginning partorisca use them.
4 / 5
Fashionable name: Regulate Clamp You grip amiably, and some tampons are roughly 1'^2. All four east of good quality.

Wishes so only that a tampon swivelled partorisca leave clamping surfaces no uniform, but of course has ways around that.
5 / 5
Fashionable name: Rule Clamp am new the Irwin clamps but am sure will buy more in a future and that this price partorisca 4 am extracted well . They take the use regulates in mine woodworking tent.
5 / 5
Fashionable name: Rule Clamp These clamps is very drawn and hanged light. They are mostly plastic, like this probably will not be in his transente down to the yours grandkids, but do a lot well so that it is.
5 / 5
Fashionable name: Rule Clamp A clamps is well, but an out of a four has broken some first time used it as it disappointed.

Top Customer Reviews: Bessey LM2.004 LM ...

Rating: 4 out of 5 with 12 ratings
4 / 5
These clamps is everything would expect. A grip of some jaws to the long of a clue is well, and a boss is comfortable. Everything looks well he has built. Has no marred any of a pasador and spruce used him on (the shows so only was that calm a lot on-presionar: good joint partorisca almost all clamping). For some reason, expected them to be bit it big in a hand, but is precisely that I orderly and did not disappoint me.
5 / 5
It likes these clamps alot! Easy to use, resists 2 together forest. Clamps Is moderately strong but he his does. Peeling Of a glue of forest has dried is fast and simple.
5 / 5
Like this calm often can does does not have to that a lot of clamps.
4 / 5
Perfecta Touches need of month. You go in r'buy 3 another more taed.
5 / 5
A bit sloppy in a slide but done a work in the good prize. The solid construction
5 / 5
Miniature clamp 2' deep for 4' the Very big material
5 / 5
Is a lot handy to have when it wants to resist the plank to the worktable and saw it. Will have a lot of use for him in my cochera. A lot of sturdy and easy to operate. The works in any one classifies of time, that can be rain, snow or more. Utmost cost.
5 / 5
These clamps is small but a lot useful. I have thought at the beginning that looked too small after ordering them and that opens a box but these are used daily. Bought 10 and value each penny
5 / 5
I like these clamps alot! Easy to use, resists 2 together forest. Clamps Is moderately strong but he his does. Peeling Of a glue of forest has dried is fast and simple.
4 / 5
A bit sloppy in a slide but done a work in the good prize. Solid construction

Top Customer Reviews: WEN 10212F2 ...

Rating: 4 out of 5 with 40 ratings
4 / 5
I have bought these partorisca dip near some frames. They are relatively easy to regulate and have the strong grip. I say relatively why they are not like this easy to the equal that another clamps has used, but is also much more in firm and less flimsy, which seats is an excellent trade era.
4 / 5
A clamp is partorisca come broken and has had to that return both, imposición home has had the alike product that it was better and in fact less money.
5 / 5
Adds clamps, sturdy and is gone in pristine condition.
4 / 5
Fences in very solid clamp that well of law for the reasonable prize.
5 / 5
Poor value, low quality. Some have been bent or has twisted. Returned my mandate immediately.
4 / 5
Are very impressed and pleased with a quality and value of a WEN branded clamps!

Like an amateur woodworker this in spite of that grows my skillset and toolset, was dulcemente state buying the clamp here and there like this required for the particular project, but taking bogged down with this trickle the approximation that salde sho time the nave for I which I already had - as my next step was to invest in multiple clamps of several measures to have manually, after imagining out of some types of projects want build and potentially sale down a street.

Averts of any fast/only-hand clamps, has had the little Bessey clamps the glue of paralizaciones ups; I found him to be of quality, but has not been fond of a boss of forest could any never look to take the very enough the grip on was wetted or dirty. His also dipped prize me out of achieving in not investing never further of the pair clamps the time.

Like this already having the little Bessey clamps, has dipped my toe in for prime minister that order the bar clamp of Jet and Jorgensen, then in estimativa active with Load of Port and WEN (I also looked in Menards' MasterForce mark, but having has bought already a HF clamp could say in a Menards' tent that MasterFroce was of any arrival of quality/more orders like HF). NOTE- I neglected to take pictures of all frames to comprise with this first description to ship for behind a waste - but a picture wouldnt said that they are roughly to say you down of my physical examination and feel material, construction, and the weight to the left is begins....

A Jet clamps was like this expensive like Bessey clamps, looks a lot of-built and sturdy but a plus along clamps (>20') has one same flex so only lany another F the fashionable sweep clamp done under torsion; a flex besides along clamps is said to be non-existent parallel purchase clamps, but parallel clamps is roughly two times a cost of regular bar clamps for both frames; there is also YouTubers the one who aims like this to modify/upgrade the regular bar clamp to the parallel clamp, but any one spends that a lot of money in the bar clamp that need to be modified? In general, I am not still to fan of any Bessey or Jet clamps and really question because an industry presses them on presented woodworkers those who are already estimate joined out of a door for the tools when there we are estimates more mark friendly and equally effective in a phase.

A HF clamps will do in the estimativa, but question his longevity like this there looked to be the plot of game in a machining of a ray, and among a bar and clamp/final of sleeve; I also read the plot of negative critiques to this discharge in both HF and MasterCraft frames.

In a half of a row of estimativa was a Jorgensen clamps. It was quite cautious having has learnt has fallen a 'Pony' name of his mark and has moved to manufacture in Cina. When This clamp has arrived, liked in fact very better that of any one a Bessey or mark of the planned jet in the majority of part, to a plastic boss that looked more grippable that some bosses of forests that I chips there was also or the party was when fall in mine Besseys. An access, arrival, construction, and the weight was still to line also to a Bessey and Jet clamps in the smallest prize. A clamping the pressure was estimated also the same to a competition priced main.

Finally, has opened on a WEN clamps. I have expected inferior materials, but will be cursed if they are not some same esatti clamp likes Jorgensen branded clamp (compares interior of pictures some listings, and will begin to think one same!); Almost identical weight. A form/of the drawing of all the parts is identical of a creation of a clamp bosses, any-marring expensive, teeth in some bars, and like a clamp the bosses are mechanically fastened/fixed to a bar. Like a Jorgensen frames, a boss is done of heavy plastic and a lot of grippable, same period but with the slightly different outline for a grip - my preference I some two travesías goes the Jorgensen, but Wen is still in a ballpark. A WEN clamp the bosses are slightly textured/the spray has finalised to protect to rust, while a Jorgensens has the smooth powder, the thickness arrived of discharge. Included a nave to/pack the materials have used for a WEN and Jorgensen clamps looked to the party averts of a mark impresa out of a box. In comparison to a Jet/Bessey clamps, a no-marring clamp the coverages are equally like this fat and chair to be the better creation is gone in a midst of adhesive-ups.

So much this time, a Jet, HF, and Jorgensen bar clamps is going back and are piecing joint the together of WEN clamps (32 in all) that will be it almost the same to a together of a 30bar of piece clamp has the place offered for Bessey with the little variac. In of the quantities of several measures, and for LESS THAN MEANS a prize.

Averts of an outline of a grip of sleeve and a discharge of powder in a Jorgensens, would not be surprised to learn both frames have been manufactured in a same factory afterwards to the each one like this another! While it liked also a Jorgensen clamps and has not gone too much more than a WEN clamps, simply can not justify 15-of 20 difference of prize to choose a Jorgensen name in WEN partorisca just a form of sleeve after doing the side for examination lateralmente - take the look in some images of product in some listings among one 2, and will see that I bad!
5 / 5
They are very impressed and pleased with a quality and value of a WEN branded clamps!

Like an amateur woodworker this in spite of that grows my skillset and toolset, had been dulcemente buying the clamp here and there like this required partorisca the particular project, but taking bogged down with this trickle the approximation that salde sho time the nave partorisca I which I already had - as my next step was partorisca invest in multiple clamps of several measures partorisca have manually, after imagining out of some types of projects want build and potentially sale down a street.

Averts of any fast/only-hand clamps, has had the little Bessey clamps the glue of paralizaciones ups; I found him partorisca be of quality, but has not been fond of a boss of forest could any never look to take the very enough the grip on was wetted or dirty. His also dipped prize me out of achieving in not investing never further of the pair clamps the time.

Like this already having the little Bessey clamps, has dipped my toe in for prime minister that order the bar clamp of Jet and Jorgensen, then in estimativa active with Load of Port and WEN (I also looked in Menards' MasterForce mark, but having has bought already a HF clamp could say in a Menards' tent that MasterFroce was of any arrival of quality/more orders like HF). NOTE- I neglected to take pictures of all frames to comprise with this first description to ship for behind a waste - but a picture wouldnt said that they are roughly to say you down of my physical examination and feel material, construction, and the weight to the left is begins....

A Jet clamps was like this expensive like Bessey clamps, looks a lot of-built and sturdy but a plus along clamps (>20') has one same flex so only lany another F the fashionable sweep clamp done under torsion; a flex besides along clamps is said to be non-existent parallel purchase clamps, but parallel clamps is roughly two times a cost of regular bar clamps for both frames; there is also YouTubers the one who aims like this to modify/upgrade the regular bar clamp to the parallel clamp, but any one spends that a lot of money in the bar clamp that need to be modified? In general, they are not to fan of any Bessey or Jets clamps and really question because an industry presses them on presented woodworkers those who are already estimate joined out of a door for the tools when there we are estimates more mark friendly and equally effective in a phase.

A HF clamps will do in the estimativa, but question his longevity like this there looked to be the plot of game in a machining of a ray, and among a bar and clamp/final of sleeve; I also read the plot of negative critiques to this discharge in both HF and MasterCraft frames.

In a half of a row of estimativa was a Jorgensen clamps. It was quite cautious having has learnt has fallen a 'Pony' name of his mark and has moved to manufacture in Cina. When This clamp has arrived, liked in fact very better that of any one a Bessey or mark of the planned jet in the majority of part, to a plastic boss that looked more grippable that some bosses of forests that I chips there was also or the party was when fall in mine Besseys. An access, arrival, construction, and the weight was to line also to a Bessey and Jet clamps in the smallest prize. A clamping the pressure was estimated also the same to a competition priced main.

Finally, has opened on a WEN clamps. I have expected inferior materials, but will be cursed if they are not some same esatti clamp likes Jorgensen branded clamp (compares interior of pictures some listings, and will begin to think one same!); Almost identical weight. A form/of the drawing of all the parts is identical of a creation of a clamp bosses, any-marring expensive, teeth in some bars, and like a clamp the bosses are mechanically fastened/fixed to a bar. Like a Jorgensen frames, a boss is done of heavy plastic and a lot of grippable, same period but with the slightly different outline for a grip - my preference I some two travesías goes the Jorgensen, but Wen is still in a ballpark. A WEN clamp the bosses are slightly textured/the spray has finalised to protect to rust, while a Jorgensens has the smooth powder, the thickness arrived of discharge. Included a nave to/pack the materials have used for a WEN and Jorgensen clamps looked to the party averts of a mark impresa out of a box. In comparison to a Jet/Bessey clamps, a no-marring clamp the coverages are equally like this fat and chair to be the better creation is gone in a midst of adhesive-ups.

So much this time, a Jet, HF, and Jorgensen bar clamps is going back and are piecing joint the together of WEN clamps (32 in all) that will be it almost the same to a together of a 30bar of piece clamp has the place offered for Bessey with the little variac. In of the quantities of several measures, and for LESS THAN MEANS a prize.

Averts of an outline of a grip of sleeve and a discharge of powder in a Jorgensens, would not be surprised to learn both frames have been manufactured in a same factory afterwards to the each one like this another! While it liked also a Jorgensen clamps and has not gone too much more than a WEN clamps, simply can not justify 15-of 20 difference of prize to choose a Jorgensen name in WEN for just a form of sleeve after doing the side for examination lateralmente - take the look in some images of product in some listings among one 2, and will see that I bad!
5 / 5
Are very impressed and pleased with a quality and value of a WEN branded clamps!

Like an amateur woodworker this in spite of that grows my skillset and toolset, was dulcemente state buying the clamp here and there like this required for the particular project, but taking bogged down with this trickle the approximation that salde sho time the nave for I which I already had - as my next step was to invest in multiple clamps of several measures to have manually, after imagining out of some types of projects want build and potentially sale down a street.

Averts of any fast/only-hand clamps, has had the little Bessey clamps the glue of paralizaciones ups; I found him to be of quality, but has not been fond of a boss of forest could any never look to take the very enough the grip on was wetted or dirty. His also dipped prize me out of achieving in not investing never further of the pair clamps the time.

Like this already having the little Bessey clamps, has dipped my toe in for prime minister that order the bar clamp of Jet and Jorgensen, then in estimativa active with Load of Port and WEN (I also looked in Menards' MasterForce mark, but having has bought already a HF clamp could say in a Menards' tent that MasterFroce was of any arrival of quality/more orders like HF). NOTE- I neglected to take pictures of all frames to comprise with this first description to ship for behind a waste - but a picture wouldnt said you that they are roughly to say you down of my physical examination and feel material, construction, and the weight to the left is begins....

A Jet clamps was like this expensive likes Bessey clamps, looks a lot of-built and sturdy but a plus along clamps (>20') has one same flex so only lany another F the fashionable sweep clamp done under torsion; a flex besides long clamps is said to be non-existent parallel purchase clamps, but parallel clamps is roughly two times a cost of regular bar clamps for both frames; there is also YouTubers the one who aims like this to modify/upgrade the regular bar clamp to the parallel clamp, but any one spends that a lot of money in the bar clamp that need to be modified? In general, they are not to fan of any Bessey or Jets clamps and really question because an industry presses them on aspiring woodworkers those who are already estimate joined out of a door for the tools when there we are estimates more mark friendly and equally effective in a phase.

A HF clamps will do in the estimativa, but question his longevity like this there looked to be the plot of game in a machining of a ray, and among a bar and clamp/final of sleeve; I also read the plot of negative critiques to this discharge in both HF and MasterCraft frames.

In a half of a row of estimativa was a Jorgensen clamps. It was quite cautious having has learnt has fallen a 'Pony' name of his mark and has moved to manufacture in Cina. When This clamp has arrived, liked in fact very better that of any one a Bessey or mark of the planned jet in the majority of part, to a plastic boss that looked more grippable that some bosses of forests that I chips there was also or the party was when fall in mine Besseys. An access, arrival, construction, and the weight was to line also to a Bessey and Jet clamps in the smallest prize. A clamping the pressure was estimated also the same to a competition priced main.

Finally, has opened on a WEN clamps. I have expected inferior materials, but will be cursed if they are not some same esatti clamp likes Jorgensen branded clamp (compares interior of pictures some listings, and will begin to think one same!); Almost identical weight. A form/of the drawing of all the parts is identical of a creation of a clamp bosses, any-marring expensive, teeth in some bars, and like a clamp the bosses are mechanically fastened/fixed to a bar. Like a Jorgensen frames, a boss is done of heavy plastic and a lot of grippable, same period but with the slightly different outline for a grip - my preference I some two travesías goes the Jorgensen, but Wen is still in a ballpark. A WEN clamp the bosses are slightly textured/the spray has finalised to protect to rust, while a Jorgensens has the smooth powder, the thickness arrived of discharge. Included a nave to/pack the materials have used for a WEN and Jorgensen clamps looked to the party averts of a mark impresa out of a box. In comparison to a Jet/Bessey clamps, a no-marring clamp the coverages are equally like this fat and chair to be the better creation is gone in a midst of adhesive-ups.

So much this time, a Jet, HF, and Jorgensen bar clamps is going back and are piecing joint the together of WEN clamps (32 in all) that will be it almost the same to a together of a 30bar of piece clamp has the place offered for Bessey with the little variac. In of the quantities of several measures, and for LESS THAN MEANS a prize.

Averts of an outline of a grip of sleeve and a discharge of powder in a Jorgensens, would not be surprised to learn both frames have been manufactured in a same factory afterwards to the each one like this another! While it liked also a Jorgensen clamps and has not gone too much more than a WEN clamps, simply can not justify 15-of 20 difference of prize to choose a Jorgensen name in WEN for just a form of sleeve after doing the side for examination lateralmente - take the look in some images of product in some listings among one 2, and will see that I bad!
4 / 5
Wow These is enormous, I supposition I didnt @give the one who big 36' clamps would be. Has the good weight to then also.

A clamps side really easy in some bars will resist alot of pressure, and the man is really has done well. A plastic clamp the part is. Ot Has done of the plastic of economic feeling. His thickness and soild same in a hand. Has the zeros complain. The desire was the little more economic but am still happy bought him.

Will be to order measures more smaller. These are the edition adds my new tent.

Finds this revises useful, please vote, so Amazonian the browsers can improves learns, investigation and comprise like products of laws for them.!. Thank you And Happy buying
5 / 5
has bought these he so that it could paste some legs of free chair for behind near where a dowels backed was. I have been for an economic plus some reasons am economic. The desire would have done the little more investigation and is spent the little more money because these take the plot by force of grip to open up. You the slide has closed so only well.
Has thought also some bosses to ray a clamps more than tight was hard to take the good grip on how were in a small and very smooth side.

Top Customer Reviews: IRWIN Quick-Grip ...

Rating: 5 out of 5 with 2 ratings
5 / 5
These are not partorisca have to that heavy clamps but are adds partorisca small pieces of furniture, cupboards, and hobby woodworking. A container says partorisca have to that light which can apply 140lbs pressure. I do not have any complaint in these clamps and now have 10 of them of all the measures. Also I love these bands of prize as they are economic way that retails.

An only complaint has had in this order was that it took it 3 weeks partorisca take here that impacted partorisca a first member of amazon.
5 / 5
3 full weeks with which have ordered these, I recieved a saying of email has shipped!! You are kidding me! When they Have arrived, it has not been a clamps in a picture, was some new(or old) has produced of final lower (useless for woodwork gluing) and that lacking of a removable end that enables them to press stead of clamp like REAL irwin clamps pictured. For real angry in this dishonesty and 3 weeks after taking your money sends. Nizza outfit.

Top Customer Reviews: Bessey GSCC2.512 ...

Rating: 4 out of 5 with 43 ratings
5 / 5
Quantity of Container of the element: 1 I has been shipped a 6inch clamp version instead in 12.mbalaje Of thumb in the stock exchange. The amazon has shipped the substitution immediately. A substitution was a correct a, but is not gone in the stock exchange and a clamp was so only tossed in a packaging. A clamp looks well, but no presiona . You grieve he grips, a clutch emissions. Defective? Oh, upper Failure red square coverage also..
4 / 5
Quantity of Container of the element: 1 Some products of beau have transmitted quickly. To the dballage, Can ascertain the usual quality Bessey, but is a bit state surprised of the small measure of stirs it. I anticipate that this will be able to prejudice by force of serrage that will be able to exert with hands of fat months : it sees comparative photo with has joined another invernadero Bessey in my possession. This says, to the price that has paid, is joins some aubaine and conserve them.
5 / 5
Quantity of Container of the element: 1 A reviewer bemoans that these clamps is not done in Germania. Partorisca Low $ 11 for clamp, this is expecting too much. Really no respecto if these are not Bessey clamps, because they DO!! No a finer arrival and everything, but so only wants to something to be resisted securely while it does in the, and these clamps hands. Highly recommended.
5 / 5
Quantity of Container of the element: 1 Solid clamps. While no like this simple to use like the hand ratcheting clamp, these are the good election partorisca amateur woodworkers like me the one who require stirs it of clamps partorisca projects and is has owed to bear sacrifice some ease-of-use to save money. They are very done like this calm does not have to that concern roughly in his substitute I under uses to regulate.
4 / 5
Quantity of Container of the element: 1 I follows the total newbie the DIY so that it does not have the tonne partorisca experience to do awesome descriptions. I have chosen this reason thought it home he imposicin spends it, does not have to that be that bad. My uses are light and like this far, loves that. It feels solid, facilitated of the use and I love a colour .
4 / 5
Quantity of Container of the element: 1 A clamp is extremely a lot of fact but there is the light tendency to flex the tad has presionado demasiado.un clutch is handy to have for the fast boss is slido.un the subject only is some tips of the coverage of the starts of hule a bit that easily.
5 / 5
Quantity of Container of the element: 1 you buy it this foreseen mostly to a pricing. No like this liked as mine another faster clamps (Irwin) but act a lot enough. You recommend especially in the available price.
4 / 5
Quantity of Container of the element: 1 his utmost. Have Absolutely any complaint and like this far has not lost any grip of hule that/cushions thingies the difference of another abordable clamps has purchased before.
To good sure recommends to buy thesis clamps.
5 / 5
Quantity of Container of the element: 1 I amour these clamps in a price abordable.
Maintains the imports are simply the hobby woodworker.
4 / 5
Quantity of Container of the element: 1 These clamps is solid and well has built. I add partorisca professional or DIY'ers.

Top Customer Reviews: TEKTON 39181 6-Inch ...

Rating: 4 out of 5 with 60 ratings
4 / 5
Measure: 12 in. I have been using an old ratchet has included clamps partorisca a past 10 years and I have decided finally has to that add the little more to a family.

These Tekton clamps had taken my eye the little month done, and I finally decided partorisca take one submerges.

Pros:
Amiably has built
Quickly boss of acting bomb
Strong clamping force

Gilipollas:
feels more economic that mine another, older clamps - but means is.. Almost more 50 economic.
Am not sure that the time will last in a long career - I will update this estaca I once has more experiences to use them.
5 / 5
Measure: 6 in. I have required 2 more fence of ratchet clamp for some cabinetry installation in a cookery...

Sincerely, a work as well as another bar clamps already have in home, in the fraction of a prize. It is very built and feels solid to recommend for light the task of half without any question. Easily it can create quite a lot of pressure.

Been of the description avenges with the soft jaws cushions so many could be to expects it class of tampons of hule, but is the removable tampon plastic regulates. The key of fast emission seat has bitten it flimsy and is sometimes last to operate when the plot of pressure is applied.

In general, am very satisfied, especially in this prize! You recommend any day now for an occasional handyman!
5 / 5
Measure: Mini 6 in. I add little clamps ... Decided has required something to substitute a loaded cradle clamps has been using in of the works to write smaller ... These clamps can be uncomfortable and so only does not give quite a lot of pressure ... This small 6' sweep clamps is the strongest plot that look and is more than pertinent for my small clamping need. A tighting the mechanism and the emission does a lot well. Simply they look better that 5 qualities of dollar. If a clamping the bosses would have been hule in place of data had plastic the 5 stars.
5 / 5
Measure: 24 in. No appearances an amazing clamp thus prize, but is remained still down bit it. Some tampons are plastics a lot hard as they tend to slide around the bit in the forest and does not line on totally parallel to the each one like this another. It have to that add that I have ordered 2 clamps and both of them have this same question. Otherwise, A quality of build looks good and hopefully will last awhile. Any way, I of the one who plan on buying these Tekton clamps again when it can so only attended for some Mastercraft some to go on sale in Canadian Wheel.
5 / 5
Measure: Mini 6 in. I have bought four of a 6inch clamps. When I have opened a container and saw him, has looked the toy. People those who purchase this need to know these are to have to that light clamps and for small objects. Realistically, That can expect for +/- $ 5. For small projects, thinks that would be good. A clamp the boss returns my 'two toes'... They are not big... But then again, calm does not want to go further the shopping centre projects ' with these. I think that that I am very pleasant also.
4 / 5
Measure: 12 in. A clamps is coming like this orderly and in good been. Clamps Control and does not slip or slack was with which has applied. A a negative I funds was a key of emission is difficult to depress when take a clamp. A solution has found was to add more clamp pressure and depress key in same time, then free so only well. So only it can require be broken in or the little wear in a key over time can he easier that operate. I have tried some oil of silicone, but any a lot of improvement. Hey For a prize can not expect perfection.
4 / 5
Measure: 24 in. I have purchased this clamp conjoint for any DIY work, and tried them for a first time yesterday while cluing the frame. A prime minister clamp has broken was and a second was in effective to say a less. They are not qualities and while you can be able to use them like me he spreader die likes one causes is setup, creates of my experience, is better was that it spends a same quantity in the sturdier clamp, then squandering your money is one . Turn a clamps could, any reason want to take my money behind, but reason have done the wrong call.
Does not recommend this product.

And yes, stuffed out of $ 150 for the pair of Bessy 90 terracing clamps this morning Seven 27, 2019. I have learnt of my deception, and hopefully can help another before they squander time, money and frustration during adhesive ups..
5 / 5
Measure: 12 in. That The fast grip adds clamps! The prize and the strong creation add also. Very happy with them.

Update: A clamp the sleeves and the supports are done of some class of edge of carbon, and snap apparently. As anybody strong plus of clamps there. One is well for light use, but at all to exhausting.
5 / 5
Measure: 12 in. I have used these bad boys in a lot of projects and has been the mate adds. I am considering buying more than these clamps further of measures. A 12 thumb is the good regular measure for small to projects of means. A quality of build is excellent and has a lot of force of control for gluing or drilling the together pieces. 100 it recommends
4 / 5
Measure: 12 in. As I have been expected! I produce it adds. He a work perfectly. It was not I last for years like my 'This clamps but looks sturdy.

Top Customer Reviews: Irwin 506QCN Next ...

Rating: 4 out of 5 with 34 ratings
4 / 5
I have required the-rid clamp partorisca some have to that heavy clamping and this element a trick. An I-beam shaped the bar is very strong and rigid - no flex. A movable course of a clamp slides smoothly in a bar and is very easy to situate and clamp a-there is rid. A face of some jaws is 1 1/2' for 1 7/8' with square flanges - which is a lot of gain when it calms does not have the plot of spatial in a flange partorisca the clamp. A face in a fixed end of a clamp pívot slightly partorisca regulate for uneven material.

My favourite characteristic of this clamp is a mechanism of fast transmission partorisca convert of the clamping to the action partorisca extend. This clamp has the sliding clip partorisca do a transmission, different the majority partorisca cause clamps this uses the both that is both slow and the risk partorisca lose a ray.

Can take you these clamps on sale, then will have an unbeatable value.

To good sure will buy another 1 or 2 clamps can take him on sale again.
4 / 5
Awesome clamps . More some I own . (I own irwin , bessey, mastercraft and another economic clamps) has 4 irwin entirely and any in a future will buy to to like him to them these .
5 / 5
There is at all I aversion in this tool! An operation of book, easy to use, quickly partorisca change to pull near, partorisca press way to line material!!!

An only thing would recommend is to 4 band with joint of corner clamps!

Would recommend this product!
4 / 5
Has ordered two, an arrived with a side of sleeve and no a stationary clamp. Once substituted, work a lot well. Well partorisca laminating upcycle pallet the forest has jointed.
4 / 5
Has multiple Irwin clamps this good work. This in spite of, when this one has been rid has been missing quell'one of a spreaders. This obviously renders a clamp 100 useless.
5 / 5
The prize adds, the product adds - I has had an old plus Irwin 6 thumb clamps that read them still adds but has required a 12 thumb clamps and do like this expected
5 / 5
So that it is perfect.
Laws with forest and around a house. Quite clamping power.
An only downside is a soiled fat in the when it comes and calms that has to that clean was. But I do not go to take the star because it has to that be protected to rust.

2020 Sep 12
Remarked rusts in an of a clamps exiting of low a bar of metal. WTH !!! To rust to exit a material has used has had to be rusted before a clamp has been done.
The no. has not done well. 1
4 / 5
To the equal that has disappointed. Irwin Has used to do material to add until his outsourced to ' is where.' These is not very practical, especially reason some tampons a lot swivel many. Some tampons of hule are also slippery and facts of some material of economic plastic type (to good sure not liking a hule to have to that heavy old grips). A throat is also very very practical. It is too superficial. I will not buy never Irwin material again. I thought that it that it would try him again one more the time after his Grips of Addiction is gone down a basin in quality, but nope. It is everything apparently.
4 / 5
Has required the-rid clamp for some have to that heavy clamping and this element a trick. An I-beam shaped the bar is very strong and rigid - no flex. A movable course of a clamp slides smoothly in a bar and is very easy to situate and clamp a-there is rid. A face of some jaws is 1 1/2' for 1 7/8' with square flanges - which is a lot of gain when it calms does not have to that it weaves of spatial in a flange for the clamp. A face in a fixed end of a clamp pívot slightly to regulate for uneven material.

My favourite characteristic of this clamp is a mechanism of fast transmission to convert of the clamping to the action to extend. This clamp has the sliding clip to do a transmission, different the majority to cause clamps this uses the both that is both slow and the risk to lose a ray.

Can take these clamps on sale, then will have an unbeatable value.

To good sure will buy another 1 or 2 clamps can take him on sale again.
4 / 5
Has loved to take place of clamps for the long time, and these are surprising. Some available annexes calm so much can use these clamps besides the ways that was originally has feigned. (I only desire some annexes have not been like this expensive in Canada)

these clamps is súper sturdy, has used him already long in woodworking projects for the nursery of my edges.

Top Customer Reviews: 4X Woodworking Clip ...

Rating: 4 out of 5 with 9 ratings
4 / 5
So only one, any he 4-to to the band likes them the description has said.
4 / 5
These are perfect partorisca small works where calm no precise extreme force. I used him the clamp planks of rustic forests while gluing his to the used IKEA table partorisca change a look of him. It is quite solid to withstand the plot by force, but would not press it too far of the parts of him are plastic. It looked to remain a lot of clamped for on 12 hours without subjects.
5 / 5
A lot of clamps. I so only state shipped an originally, but a vendor has solved that quickly for me.
4 / 5
Very small clamp, control a good project.
Has had small resemblance clamps that so only does not have presionado properly, these maintain control until they are libertos.
4 / 5
Look to be that he his good work. Any complaint like this far.
4 / 5
An orange course of a Clamp always the slips was. If you are in Canada, can take a same element for CAD Hardware of House.
5 / 5
These are not really woodworking friendly. Ossia For tiny projects. Some plastic curves when you try presionarles
4 / 5
A lot cheaply does not look goes to resist near very long a lot disappointed
4 / 5
Good value for a money. It feels stronger that looks. A lot of sturdy and sure.

Top Customer Reviews: Bessey GSCC2.536 ...

Rating: 4 out of 5 with 17 ratings
4 / 5
Has the big number of Bessey clamps in this way that is quell'has bitten shorter and has done always very partorisca all my projects. Always they close securely and is not also the time that eats partorisca situate. A measure of a clamp is not too excessive to the equal that are easy to hang in the wall or stow is gone in your cochera. This (3 foot) the measure is the necessity he do cupboards or of the pieces of furniture of small house to the equal that will do the world of difference in maintaining the together pieces while a dry glue. I have ordered this two times and there is remarked that 1 has been missing a red anti-marring the tampon but ossia the subject smaller, both arrived and the law adds.
5 / 5
Exactly to the equal that has described. Perhaps a lot like this sturdy like some have seen but some another was much more money. Appearance slowly partorisca order the little more, which will delete any one subject could have with some bars a lot when be pas súper can does does not have to that never a lot clamps 😁 Ossia an excellent product partorisca a point of prize.
4 / 5
These are the smallest plot then expected them to them partorisca be, also would owe that the stress is partorisca works partorisca have to READ so only. Any type of heavy works will ruin them/will ruin them has tried . They are useful partorisca the smallest materials has thought them so only has been partorisca be something another then the one who has received them.
4 / 5
These applauses do not resist at all, please does not squander your money!
5 / 5
Too flimsy, no attended Bessy would have such clamp. It have to that it has read it attentively in a measure.
4 / 5
Are happy with him, he a work without rasgar the hole in yours estimativa (of then more need of people more than a clamp)
4 / 5
You a trick. No an usual quality would expect of Bessy, but good partorisca a prize!
4 / 5
Take which pays stops. Not having to that so that heavy as mine another Bessy clamps but enough well for a prize.

One of lacking mine a hule protective in a clamp which is the little annoying like my another of the that is returned the.
4 / 5
A clamp tin a lot scrape he tight reason hardly add pressure a clamp the slides behind down an iron of metal. (It does not close in place)

Totally useless.
5 / 5
My husband is impressed like this with these is ordering more. I guess it conceal to say it all

Top Customer Reviews: Astarye Hose Clips ...

Rating: 4 out of 5 with 2 ratings
4 / 5
The big clips have required partorisca Hose of Hot Cuba partorisca connect my bomb of puddle
4 / 5
has used games resserrer the durite of the direction assisted of mine 406, paste partorisca cause that they are broken.

Any pb. Work