Trending Aoyue Industrial Power Tools Products

What is Aoyue Industrial Power Tools?


Top Customer Reviews: Aoyue 968A Plus SMD ...

Rating: 4 out of 5 with 35 ratings
5 / 5
This hot air rework the canal is fantastic. A bit those that things partorisca remark this in spite of:
-A vacuum pickup the tool is not independent, and has to that be attached to a canal partorisca solder partorisca be used
-An absorber partorisca smoke also uses a same port like vacuum tube.
-Some digital controls partorisca a section of the hot air does not augment /decrease a temperature the terracing the time, but for multiple terracings (which is not particularly of entity, likes the distance resists a gun of the hot air of a component affects a quantity partorisca heat transferred)
-An iron partorisca solder @@@knob of control of the temperature of leaves of the temperature/of increasing decreasing for the terracing the time
-An iron partorisca solder the row of temperature is 180 terracings Celsius to 480 terracings Celsius.
-A row of the temperature of hot air is 90 terracings Celsius to 480 terracings Celsius.

This canal comprises the plot of parts. A canal has received comprised (partorisca chance):
-A canal of hot air + 5 nozzles
-An iron partorisca solder + 10 tips + 1 discharges of tip
-absorber of Smoke, which can be detached of an iron (more in this)
-Soldering stand of iron + has saldado spool + wool of brass with container partorisca resist sponge + of wool with container partorisca resist sponge
-IC popper + vacuum pickup tool with 3 element + of tips of spare heating

to That I liked me to it:
-An iron partorisca solder hot on quickly and when the management was, shows that it is still hot.
-A section of the hot air also heats on quickly
-Comes with nozzles and a lot of tips
-A stand is solid, a solder spool circles smoothly and has the wool of brass partorisca clean an iron partorisca solder tip (any thermal impressive)

displeased It:
-A hose partorisca a hot air is a bit short, measuring the little more than 3 feet of units partorisca top of a gun of air (without nozzle).

-An absorber of smoke can be the bit of the hindrance when soldering. When Take an absorber of smoke, a nozzle of metal
partorisca an absorber of smoke has to that be detached of a hose, which is taken so only for some feeble glue. Also it requires
take the ray, and leaves an iron partorisca solder rest with an empty plastic leeve' meaning partorisca resist a pen of absorber of the smoke
in place, still leaving an iron the little uncomfortable. Without an absorber of smoke, some chairs to iron awkwardly in a stand.

-A vacuum the tool has to that be attached to a canal, that requires that you unscrew an absorber of smoke. It have to that be stand so only
-A ray that attaches an iron partorisca solder to a canal is easy to ray on, but difficult to the ray was. It can be so only my canal.

I really do like this the canal and His mainly use partorisca hot air rework. Utilisation an iron partorisca solder jointly with my
Weller WES51, as it conceal one is more comfortable that use, but this one has more tips, the temperature controls more precise
and the better stand. It likes- one contrives of an absorber of smoke, but thinks it could have been has actuated better.
4 / 5
Good piece of crew. Works exactly to the equal that has expected. A smoke extractor do so only if it is on a point partorisca solder, if it is was to a side or another smoke will go directly on spent the. (So only the curve partorisca learn) All more roughly the law adds. I have had he partorisca the few weeks now and facts in several different projects with him, and taste of a lot. All some the different tips go in a lot handy.
4 / 5
Took the moment partorisca take his use... But you result partorisca be the investment adds. It is of course any elegant plus rework canal that exists today, but partorisca this class of money, give me abundance partorisca do with. So much, ossia very material .
4 / 5
Extracted well and the solid has built. Control of temperature of the gun of the law of heat adds when using partorisca bend plásticoes different. Like another reviewers has said, ossia one of some better canal partorisca have in your labour bank.
5 / 5
A hardware is industrial quality . To good sure impressive and well has drawn. Calm will not find any a lot of better deals. A collector partorisca smoke in fact works, was able to solder in the small room without so much smoke. Still his odorerà occasionally, is not partorisca perfect but marvels of laws.
5 / 5
Has been using this rework canal partorisca the year now and can not say quite a lot of good things roughly tried it to be versados the and a lot of dependable. - Highly it produces recommended
4 / 5
the works add, feet of frames of hule with timing as be careful the one who calm leave it on.
4 / 5
Simple to use produced. Tool of the level of entrance adds for pc together reworking/interview.
5 / 5
Add little canal. They are the total beginner and adapt me so only well and has been said by friends with more than experiencing that it was quite some time before I 'outgrow' this unit.
5 / 5
Produced a lot well, of the only drawback is that his no possible to find the thinnest tips smaller for a solder iron, in spite of, a gun of heat touches a better in a phase in my opinion, better that weller :or
4 / 5
My rework the canal has arrived today, unfortunately has broken. I have been excited partorisca use this product immediately but with which unpacked a canal could listen forceful rattling in pertinent inside a unit. With which loosening an external organism has found a @@subject to be all 4 plastic pegs meaning partorisca resist a controller of the power in place is snapped or broken. A unit felizmente still does properly, this in spite of am disappointed in control of quality and lack of fragile stickers on shipping box.
4 / 5
The amazon pressed one with the prize, when that consults a description sees could have taken he partorisca the $100 less.

Does not comprise Me bad, thinks that is adds partorisca the hobbyist, so only that the amazon has abused is monopoly partorisca press me a unwarranted markup.

A hotair is a an I use more. A lot handy the unclog hotends and partorisca shrink tubing.

Has not been that effective one smokes extractor is, but odora much less partorisca solder when it use it.
5 / 5
I add little canal. They are the total beginner and adapt me so only well and has been said by friends with more than experiencing that it was quite some time before I 'outgrow' this unit.
5 / 5
Produces a lot well, an only drawback is that his no possible to find the thinnest tips smaller for a solder iron, in spite of, a gun of heat touches a better in a phase in my opinion, better that weller :or
4 / 5
my order has used has not been for a a described in a text and the image there is not the reflow gun and was the different unit.
5 / 5
Canal of descent, no a better quality or prize. But it takes a work done
5 / 5
Touch the really good rework recommended. The hard appearance to yearn me..
5 / 5
Some works of the unit does not fine any question, so only the little has bitten noisy when that uses a smoke vacuum system.
5 / 5
Very pleased, the charm and has been useful for general use.
5 / 5
Excellent cx service of me more than tampon of missing foot 3 extra and FAST. The unit is very done and is the interpreter.
4 / 5
Greta rework Canal for a cost... A lot of accessories and any question...
4 / 5
Excellent, works súper well, the control of the temperature is excellent delivery , fast
5 / 5
work of unit perfectly am them very happy
lovely plot partorisca a prize
5 / 5
adore my canal..... It is wonderful... Has Déja has had joins Canal Weller and has had no objective truthé.... The Canal did not have me donné of advantage.....

But this Canal is full crew ..... Impressive..... Everything is has included.... Truth at all He redire...

He he the absorber of smoke is of has joined efficacité fearsome....

TRUTH , but the truth at all &Worsens; redire......

Had A doubt to the déMay... It joins restlessness..... But apres several months... I recommend it 100 %
5 / 5
I have had this Rework Canal partorisca 2 years now and is been the advantage adds to a bank. Questions of zeros, an only Hot Air & Iron I now use. A bit those that youtube video tutorials taken up and that careers in junk elements of drawer and was easier that has thought. Utilisation the big articulating the arm that Augments glass among me and a piece of work for highland components of the surface with ease. Bang Partorisca Buck, this box has all precise !
5 / 5
This hot air rework the canal is fantastic. A bit those that things partorisca remark this in spite of:
-A vacuum pickup the tool is not independent, and has to that be attached to a canal partorisca solder partorisca be used
-An absorber partorisca smoke also uses a same port like vacuum tube.
-Some digital controls partorisca a section of the hot air does not augment /decrease a temperature the terracing the time, but for multiple terracings (which is not particularly of entity, likes the distance resists a gun of the hot air of a component affects a quantity partorisca heat transferred)
-An iron partorisca solder @@@knob of control of the temperature of leaves of the temperature/of increasing decreasing for the terracing the time
-An iron partorisca solder the row of temperature is 180 terracings Celsius to 480 terracings Celsius.
-A row of the temperature of hot air is 90 terracings Celsius to 480 terracings Celsius.

This canal comprises the plot of parts. A canal has received comprised (partorisca chance):
-A canal of hot air + 5 nozzles
-An iron partorisca solder + 10 tips + 1 discharges of tip
-absorber of Smoke, which can be detached of an iron (more in this)
-Soldering stand of iron + has saldado spool + wool of brass with container partorisca resist sponge + of wool with container partorisca resist sponge
-IC popper + vacuum pickup tool with 3 element + of tips of spare heating

to That I liked me to it:
-An iron partorisca solder hot on quickly and when the management was, shows that it is still hot.
-A section of the hot air also heats on quickly
-Comes with nozzles and a lot of tips
-A stand is solid, a solder spool circles smoothly and has the wool of brass partorisca clean an iron partorisca solder tip (any thermal that impresses)

displeased It:
-A hose partorisca a hot air is a bit short, measuring the little more than 3 feet of units partorisca top of a gun of air (without nozzle).

-An absorber of smoke can be the bit of the hindrance when soldering. When Take an absorber of smoke, a nozzle of metal
partorisca an absorber of smoke has to that be detached of a hose, which is taken so only for some feeble glue. Also it requires
take the ray, and leaves an iron partorisca solder rest with an empty plastic leeve' meaning partorisca resist a pen of absorber of the smoke
in place, still leaving an iron the little uncomfortable. Without an absorber of smoke, some chairs to iron awkwardly in a stand.

-A vacuum the tool has to that be attached to a canal, that requires that you unscrew an absorber of smoke. It would owe that be stand so only
-A ray that attaches an iron partorisca solder to a canal is easy to ray on, but difficult to the ray was. It could be so only my canal.

I really do like this the canal and His mainly use partorisca hot air rework. Utilisation an iron partorisca solder jointly with my
Weller WES51, as it concealed one is more comfortable that use, but this one has more tips, the temperature controls more precise
and the better stand. It likes- one contrives of an absorber of smoke, but thinks it could have been has actuated better.
5 / 5
The amazon pressed one with the prize, when that consults a description sees could have taken he partorisca the $100 less.

Does not comprise Me bad, thinks that is adds partorisca the hobbyist, so only that the amazon has abused is monopoly partorisca press me a unwarranted markup.

A hotair is a an I use more. A lot handy the unclog hotends and partorisca shrink tubing.

Has not been that effective one smokes extractor is, but odora much less partorisca solder when it uses it.
4 / 5
Took the moment partorisca take his use... But it is resulted partorisca be the investment adds. It is of course any elegant plus rework canal that exists today, but partorisca this class of money, give me abundance partorisca do with. So much, ossia very material .
5 / 5
Has been using this rework canal partorisca to the long of the year now and can not say quite a lot of good things roughly tried it to be versados the and a lot of dependable. - Highly it produces recommended
4 / 5
I add little canal. They are the total beginner and adapt me so only well and has been said by friends with more than experiencing that it will be quite some time before I 'outgrow' this unit.
5 / 5
my order has used has not been for a a described in a text and the image has not had the reflow gun and was the different unit.
4 / 5
Touch the really good rework recommended. The appearance will last to yearn me..
4 / 5
adore my canal..... It is wonderful... Has Déja has had joins Canal Weller and has had no objective truthé.... The Canal did not have me donné of goodness.....

But this Canal is full crew ..... impressionant..... Everything is has included.... Truth at all He redire...

He he the absorber of smoke is of has joined efficacité fearsome....

TRUTH , but the truth at all &Worsens; redire......

Had A doubt to the déMay... It joins restlessness..... But apres several months... I recommend it 100 %
4 / 5
I have had this Rework Canal partorisca 2 years now and is been the goodness adds to a bank. Questions of zeros, an only Hot Air & Iron I now use. A bit those that youtube video tutorials taken up and that careers in junk elements of drawer and was easier that has thought. Utilisation the big articulating the arm that Augments glass among me and a piece of work for highland components of the surface with ease. Bang Partorisca Buck, this box has all precise !
5 / 5
Has bought this end of febuary 2019, work well, random use of course, mod works and the one who any, he looses the star because a hose of suction in an end of an iron has taken brittle and has broken was.. At all some glues cant fix, but another that that any subject !. After the year to use still is doing a lot well.

Top Customer Reviews: Aoyue 888A 2 in 1 ...

Rating: 4 out of 5 with 37 ratings
4 / 5
The aversion that has to that give poor descriptions; but I think that that another would benefit partorisca listen in my experiences.

Has purchased my Aoyue 888A 2 in 1 Hot Air Digital Rework and Soldering Canal on October 28th, 2018, and unfortunately has not tried a canal partorisca the month, with which the one who a window of turn had closed.

When I finally dipped a canal on, has discovered that although a wand of the fact of hot air (albeit was 15 terracings Celsius was, requiring calibration), a real soldering the wand has not taken quite hot to boil water, much less melt solder. It was able to resist a business end in my hand while an exposure of canal has said to be the toasty 480 terracings C for roughly 10 minutes.
Has tried to disassemble and reassembling a wand, that substitutes some tips, all a manual instructed to do, at least two times in the each chance. I have tried plugging a canal covers it different in my house, that comprises a cookery, which have the receptacles have drawn for use of big drain. I have verified an available voltage in all my discharge, and is a correct 110 V. I have concluded for this that has had the question neither with a wand to solder he, or a canal to solder console.

So much, on December 4th, 2018, has contacted Aoyue service of client, and has taken the punctual response; and with which recounting a history on, has been asked to open a console and look for anything concealed was obviously wrong (a free boss, soufflé capacitor, the connection broken etc.), And some the only things have seen was copious numbers of stickers of Control of the Quality everywhere.

My contact in Aoyue sent then the new soldering wand, while it was so only the question with a wand he; and a substitution arrived inside the week. I have installed a new wand, and unfortunately has not had any improvement, a substitution that has saldado the wand never has included goring like hot like original.

After informing this to my contact in Aoyue on December 19th, 2018, was asked then to send a defective canal to them, and his troubleshoot a canal, repairs it, and the mine of turn. So much, I packaged on my canal, and shipped it to them, that paid for a shipment I in a cost of in $ 20 CAD (has not been reimbursed). Thus point roughly two month had spent of then has purchased my canal, and there was not able state of the use once.

After expecting the month without informative, has contacted Aoyue again on February 2nd, 2019, to confirm that my canal had arrived in his hands ( has), and has been said that they could not find anything wrong; and that would try to reproduce my question and go back mine when they have been finalised.

After expecting almost three months without informative I another time has contacted Aoyue on April 24th, 2019 (6 month of then shabby) to inquire has had any informative in my canal. I have received an apologetic response, and has been said that they still could not imagine was the one who a question had been, as we send me he refurbished canal instead.

A refurbished the canal has arrived the week later, and arrive PARTIALLY BROKEN. Although a wand to solder now looks to do properly, a wand of the hot air there has been the sign rattling the noise when moved, and a defender of hot air almost immediately jammed with something some first time used it.

Taking a wand of hot air averts to imagine out of that was bad, I in the first place found that a person of leading reparation had tried the silicious use sealant the 'adhesive' some two together halves, like the silicone was smeared during an outside and interior of some two halves of an external shell.
Has directed once to pry some two halves avert has found that has had the plot of loose components that is resisted to situate so only for some two halves of a shell, and that there was alot to wire and such in a street of a partidário to an element to heat, which would restrict flow of air. A source of a rattling has been the glass broken that it was free in an already cramped spaces of a wand.
Resulted that an element to heat is closed in the glass streaky tube, by means of quell'hot air is spent of the defender of cage of economic squirrel. This tube of the glass partially had broken, and pieces duquel had fallen to a defender and jammed the.

Take a glass, and a tube, has discovered concealed no only was a tube broken and broken almost down his' whole period, but when reconstructed a tube of glass, has had extra pieces; that suggests that this had spent more than a swipe, and a last person to repair this had not annoyed to take all some pieces broken of a leading harm.
Has had the tube of the substitution has comprised in a container, as I installed it, and has then discovered that my careful manipulations had broken a boss of power out of one of some terminals of defender, rendering the useless and that has required an additional reparation (ironically quite that uses a wand to solder side of a canal).

My supposition to the equal that to the spent is that a tube of glass fractured any by means of thermal accident (improper cooling with which uses), or by means of the acute swipe to a tube he while still hot. It can not have spent during shipping, like the wand was also a lot cushioned in a packaging, and any impact with sufficient force to break this component would have caused noticeable harm to another in a box also.
Has very seen mentions of a rattling and jamming question that has experienced (and repaired), likes glass liner breakage the question is obviously the known question that has not annoyed to fix in a creation. Or some levels of manufacture of these liners is of unsuitable quality thus purpose.

Trying reassemble some two halves of a shell of the wand of hot air was difficult to say a less; to having said like this first , the majority of some components are resisted in place for some two halves of a shell, there is little free space, and some the inner bosses are like this short that requires some two halves of a shell to be partially closed to have quite slack to manipulate them to plant.
A defender of cage of the squirrel in some accesses of wand of harm of hot air, and is of quality VERY ECONOMIC, as I have seen the partidários identical has announced to purchase in web of places of discounts for the few dollars or less for multiple units, and a street of the air by means of a wand is very restricted. A defender in a wand any included the looks is a an around the one who a shell is drawn neither, how is the tight apt, and is gone in the fact averts when you try to manipulate he to plant (another unnecessary reparation further of a reparation of boss has mentioned earlier).

I also think that a forward espersona of pair' has not gathered a wand of hot air correctly, as I have found another way of routing some bosses that gave more slack to do with, required fewer curves around corners, and has to that the easiest fact to gather some two halves (any glue required). It have taken pictures of all this, but has been at the same time quite nettled to chew nails, and has loved so only the working canal to use. If I do not owe that never open a wand again, will take photo then.

Like this @in rodeo:
- Are months does has bought the canal that for some reason has had the working bad soldering wand, and any one could imagine out of that was bad with him.
- There is copious QC stickers inside a console, this in spite of can resist a hot end of BOTH an original and some wands of substitution in my hand in his dipping his hot plus, as SOMETHING was bad.
- I has had to pay to send a canal the Aoyue for reparation.
- I has had to contact Aoyue to take spent of mine behind, and take four month to take the esfurbished' version, so only for the discover the reparation has required also.
- Whomever Repaired a wand of hot air before he took me bad; if it was a Aoyue Refurbishment technician then they a exceptionally poor work; they have not substituted a glass broken liner tube (or has broken he during trying of his reparation), and sinister parts of a previously broken tube behind after his reparation to jam a defender, has gathered a wand wrongly, and tried to use silicon sealant the 'adhesive' some two for behind together halves. If instead, ossia a work of a leading owner, then seriously doubts that a unit has been sent was included refurbished, but instead was so only reboxed and the mine has sent; like this in all the chance, ossia service of unacceptable client .

- My contact in Aoyue was initially quickly to answer, and was had enough to be useful, but does not create ossia a way would owe that it has been treated.

In my opinion would owe that it has been sent the refurbished until Immediately after my unit arrived in his hands, ANY FOUR MONTHS later, and so only WITH WHICH has HAD TO CONTACT THEM. Other companies included could have sent refurbished better version of his product like a upgrade and excuse for a exorbitantly along (four to six MONTH) attended.

Aoyue Also would owe that it has offered to pay for shipment of my unit broken; I manage to ship fulfilled where reads, and know that you can issue the essello of nave of the turn' to client to return broken or defective products to a costruttore without forcing them to pay for a service they.

Will not be purchasing a Aoyue produced again; @I give that this was the 'low prize' option that has purchased, but a quality of a craftsmanship has not been value still a prize under that has paid, and has thought a representative of the service of the client was always fast to answer, far more than a mediocre endeavour that has experienced, could be be do to do me the client the happy and loyal plus; especially that considers some scales to time that this has required to 'fix'.

If ossia an experience takes with a product of level of the entrance, does not see any reason because it would owe that invest in the product the expensive plus of this company.
5 / 5
Has bought this element few years this in spite of me so only used less than 5 hours.
While it turns a main transmission on(any one a transmission of hot air), a blower the engine continued and can turn very included was.
Perhaps a thermostat in a blower the unit there is acted bad after so only little time to use.
4 / 5
Has used a gun of hot air perhaps 5 times and now to to sounds likes him to him something has broken in an interior and rattles around. From time to time he jams in a fan which is not well. A day will try to take averts it to see yes can be fixed. A gun to solder so that far it has done it enough well.
5 / 5
After finding video of zeros of this canal to solder on-line, has taken the casualidad and has ordered one. It avenges a lot of packaged, with instructions, with which plugging he in and touching with him, has known has had the real gem of the canal to solder in my side. The no really needs a, but I maintaining has it. I have decided to take avert my computer of office and Of-solder the chip out of him, then try the place results his the little more difficult that one could think, probably has not used a right tip reason with which have been done a computer does not have behind turned on....
5 / 5
Has been using he for the pairs of months and I so that they are really please with him. A work of gun of the good heat and take hot quite quickly. Included goes for an iron to solder.

A two element would change to the draw is is a period of some bosses and cool down of a gun. Some bosses are quell'has bitten short as yes you are planning dipped this in your bank of work. To cool down a gun among overdrive some time 10 to 15 min after closing down. Quell'Conceals would not owe that prevent calm to buy this canal.
4 / 5
These works of good element. It is of good quality for a prize. My only complaint is that a temp is measured deep in an element and any after a tip. Taken so as the half the minute for a tip to take up. A temp lag is better once a unit is until temp for the moment and heated by means of.

Are so only the random user these days, but am doing intricate work.
4 / 5
Works of gun of the heat, an iron to solder is broken already with which 5 uses...
5 / 5
This unit is excellent. It has not known Never that has been missing until it take a gun of hot air . Of the heat shrinks to rework this unit is fantastic. An iron has multiple tips and is extremely of confidence.
5 / 5
Some pencils to solder and the annexes are utmost. We will see like a defender exits like this the looks bit it more economic that a rest of a unit.
4 / 5
I bough this for my edges to use to repair game of old arcade PCBs. It looks to do a lot well.
5 / 5
When it Arrives a box has had so only a controller and a gun of hot (wand) All of some other parts has been missing. This has comprised an iron to solder. Some tips for an iron. A headline for a gun of hot and an iron, some nozzles to air a sponge and spool title. Achieved a company and his rushed out of some parts disappeared. Pleased with a fast response to a question. A prize was a lot of and has has used now a wand of air he in the pair of cct. Import to comprise that you have to that NEVER GONE BACK of a blower using a transmission to be able to. Turned a temp to low and has left the quota with an air that flows to extend a life. You look in diverse and this one was a better in a row of prize. I think that that I will buy a desoldering gun and the give shot that. I have found a control of temperature was fast and attentive. Value of the money and I has liked him a fast service to fix my question. While to some parts so that pode does not say roughly an iron. I will give the gone when it arrives and will see to like work.
4 / 5
I bough this partorisca my edges partorisca use to repair game of old arcade PCBs. It looks partorisca do a lot well.
4 / 5
Fast and any to noisy an only failure would be a boss in an iron is resulted quida hot could be isolated bit it more
but still the unit adds
4 / 5
the unit Adds good works. I have not used a section of hot air to solder still but has tried a heat and the suspect will do properly. I have had some questions for a cashier - was punctual to answer with clear responses and favorecedoras.
4 / 5
Does a lot well. Control of good temperature, a lot of responsive. I did not subject it to heavy use, but very pleased like this far.
4 / 5
Been using he for the year in an industrial application. The works add
5 / 5
am really happy with my compraventa, and as be when takings yours !
4 / 5
Plug3d He in and there is remarked immediately an iron to solder digital temp the exposure was faulty. A prime minister exposed has not been functional. There it go it the week now this in spite of not doing .
4 / 5
The element adds, very happy with him and a time take to ship
5 / 5
There is has not TRIED FULLY This Produces Still but looks partorisca Do Well like this far !
4 / 5
Element very good. It was a lot of gain with my builds of project. Hot Quickly and is very calm.
4 / 5
Quite well, use he daily and any question with which almost the year
4 / 5
The defender does not act . Lucido Spends The souder is intermittent.
4 / 5
It looks very built, the law adds. Very happy with him. Shipped very quickly too much.
5 / 5
Each professional knows for now that AOYUE is the mark of professional use partorisca electronic engineers that they want to take a work done.
M Like the first user in Aoyue the products was the litlebit has concerned is build partorisca use of long time like my ZD canal that use partorisca on 18 years now.
In that has it Already a AOYUE 701A++ (partorisca two month now) this in spite of, has left all my worries behind me, the cause has verified he of upper to subordinated and is fact very inner and respectfully has gathered.
This was also my first time has used the 'hot air' soldering/desoldering canal (the cause there is never treat smd first parts) to the equal that has there was also some doubts in an use and quality of a 'hot air' pencil but while using it there is of then takes a work done, as I guess am satisfied with him too much.
I also verified in an interior of this canal and like the another I already has, is also inner very gathered also.
HAS two transmission-@@@knob of tower in front of a unit partorisca turn 'on' and regulating a temp (C) partorisca iron and pencil. Prefer separate transmissions this in spite of (partorisca this use like other models or the companies have) but while they have had to, is well with me.

Comes with 8+1 extra soldering tips partorisca any use in a container and 3 air outlets partorisca a pencil ( all know the one who expensive some parts can be when sold for separate)
To the left is not partorisca forget concealed: A prize on is also awesome also!
Has satisfied totally with this unit and I totally recommend it to all the professionals or no.
4 / 5
The aversion that has to that give poor descriptions; but I think that that another would benefit partorisca listen in my experiences.

Has purchased my Aoyue 888A 2 in 1 Hot Air Digital Rework and Soldering Canal on October 28th, 2018, and unfortunately has not tried a canal partorisca the month, with which the one who a window of turn had closed.

When I finally dipped a canal on, has discovered that although a wand of the fact of hot air (albeit was 15 terracings Celsius was, requiring calibration), a real soldering the wand has not taken quite hot to boil water, much less melt solder. It was able to resist a business end in my hand while an exposure of canal has said that it was the toasty 480 terracings C for roughly 10 minutes.
Has tried to disassemble and reassembling a wand, that substitutes some tips, all a manual instructed to do, at least two times in the each chance. I have tried plugging a canal covers it different in my house, that comprises a cookery, which have the receptacles have drawn for use of big drain. I have verified an available voltage in all my discharge, and was a correct 110 V. I have concluded for this that has had the question neither with a wand to solder he, or a canal to solder console.

So much, on December 4th, 2018, has contacted Aoyue service of client, and has taken the punctual response; and with which recounting a history on, has been asked to open a console and look for anything concealed was obviously wrong (a free boss, soufflé capacitor, the connection broken etc.), And some the only things have seen was copious numbers of stickers of Control of the Quality everywhere.

My contact in Aoyue sent then the new soldering wand, while it was so only the question with a wand he; and a substitution arrived inside the week. I have installed a new wand, and unfortunately has not had any improvement, a substitution that has saldado the wand never has included goring like hot like original.

After informing this to my contact in Aoyue on December 19th, 2018, was asked then to send a defective canal to them, and his troubleshoot a canal, repairs it, and the mine of turn. So much, I packaged on my canal, and shipped it to them, that paid for a shipment I in a cost of in $ 20 CAD (has not been reimbursed). Thus point roughly two month had spent of then has purchased my canal, and there was not able state of the use once.

After expecting the month without informative, has contacted Aoyue again on February 2nd, 2019, to confirm that my canal had arrived in his hands ( has had), and has been said that they could not find anything wrong; and that would try to reproduce my question and go back mine when they have been finalised.

After expecting almost three months without informative I another time has contacted Aoyue on April 24th, 2019 (6 month of then shabby) to inquire has had any informative in my canal. I have received an apologetic response, and has been said that they still could not imagine was the one who a question had been, as we send me he refurbished canal instead.

A refurbished the canal has arrived the week later, and has arrived PARTIALLY BROKEN. Although a wand to solder now looks to do properly, a wand of the hot air there has been the sign rattling the noise when moved, and a defender of hot air almost immediately jammed with something some first time used it.

Taking a wand of hot air averts to imagine out of that was bad, I in the first place found that a person of leading reparation had tried the silicious use sealant the 'adhesive' some two together halves, like the silicone was smeared during an outside and interior of some two halves of an external shell.
Has directed once to pry some two halves avert has found that has had the plot of loose components that is resisted to situate so only for some two halves of a shell, and that there was alot to wire and such in a street of a partidário to an element to heat, which would restrict flow of air. A source of a rattling has been the glass broken that it was free in an already cramped spaces of a wand.
Resulted that an element to heat is closed in the glass streaky tube, by means of quell'hot air is spent of the defender of cage of economic squirrel. This tube of the glass partially had broken, and pieces duquel had fallen to a defender and jammed the.

Take a glass, and a tube, has discovered concealed no only was a tube broken and broken almost down his' whole period, but when reconstructed a tube of glass, has had extra pieces; that suggests that this had spent more than a swipe, and a last person to repair this had not annoyed to take all some pieces broken of a leading harm.
Has had the tube of the substitution has comprised in a container, as I installed it, and has then discovered that my careful manipulations had broken a boss of power out of one of some terminals of defender, rendering the useless and that has required an additional reparation (ironically quite that uses a wand to solder side of a canal).

My supposition to the equal that to the spent is that a tube of glass fractured any by means of thermal accident (improper cooling with which uses), or by means of the acute swipe to a tube he while still hot. It could not have spent during shipping, like the wand was also a lot cushioned in a packaging, and any impact with sufficient force to break this component would have caused noticeable harm to another in a box also.
Has very seen mentions of a rattling and jamming question that has experienced (and repaired), likes glass liner breakage the question is obviously the known question that has not annoyed to fix in a creation. Or some levels of manufacture of these liners is of unsuitable quality thus purpose.

Trying reassemble some two halves of a shell of the wand of hot air was difficult to say a less; to having said like this first , the majority of some components are resisted in place for some two halves of a shell, there is little free space, and some the inner bosses are like this short that requires some two halves of a shell to be partially closed to have quite slack to manipulate them to plant.
A defender of cage of the squirrel in some accesses of wand of harm of hot air, and is of quality VERY ECONOMIC, as I have seen the partidários identical has announced to purchase in web of places of discounts for the few dollars or less for multiple units, and a street of the air by means of a wand is very restricted. A defender in a wand any included the looks is a an around the one who a shell is drawn neither, how is the tight apt, and is gone in the fact averts when it has looked for to manipulate he to plant (another unnecessary reparation further of a reparation of boss has mentioned earlier).

I also think that a forward espersona of pair' has not gathered a wand of hot air correctly, as I have found another way of routing some bosses that gave more slack to do with, required fewer curves around corners, and has to that the easiest fact to gather some two halves (any glue required). It would have taken pictures of all this, but is at the same time state quite nettled to chew nails, and has loved so only the working canal to use. If I do not owe that never open a wand again, will take photo then.

Like this @in rodeo:
- Are months does has bought the canal that for some reason has had the working bad soldering wand, and any one could imagine out of that was bad with him.
- There is copious QC stickers inside a console, this in spite of could resist a hot end of BOTH an original and some wands of substitution in my hand in his dipping his hot plus, as SOMETHING was bad.
- I has had to pay to send a canal the Aoyue for reparation.
- I has had to contact Aoyue to take spent of mine behind, and has taken four month to take the esfurbished' version, so only for the discover the reparation has required also.
- Whomever Repaired a wand of hot air before he took me bad; if it was a Aoyue Refurbishment technician then they a exceptionally poor work; they have not substituted a glass broken liner tube (or has broken he during trying of his reparation), and sinister parts of a previously broken tube behind after his reparation to jam a defender, has gathered a wand wrongly, and tried to use silicon sealant the 'adhesive' some two for behind together halves. If instead, ossia a work of a leading owner, then seriously doubts that a unit has been sent was included refurbished, but instead was so only reboxed and the mine has sent; like this in all the chance, ossia service of unacceptable client .

- My contact in Aoyue was initially quickly to answer, and was had enough to be useful, but does not create ossia a way would owe that it has been treated.

In my opinion would owe that it has been sent the refurbished until Immediately after my unit arrived in his hands, ANY FOUR MONTHS later, and so only WITH WHICH has HAD TO CONTACT THEM. Other companies included could has sent refurbished better version of his product like a upgrade and excuse for a exorbitantly along (four to six MONTH) attended.

Aoyue Also would owe that it has offered to pay for shipment of my unit broken; I manage to ship fulfilled where reads, and know that you can issue the essello of nave of the turn' to client to return broken or defective products to a costruttore without forcing them to pay for a service they.

Will not be purchasing a Aoyue produced again; @I give that this was the 'low prize' option that has purchased, but a quality of a craftsmanship has not been value still a prize under that has paid, and has thought a representative of the service of the client was always fast to answer, far more than a mediocre endeavour that has experienced, could be be do to do me the client the happy and loyal plus; especially that considers some scales to time that this has required to 'fix'.

If ossia an experience takes with a product of level of the entrance, does not see any reason because it would owe that invest in the product the expensive plus of this company.
4 / 5
When it Has arrived a box has had so only a controller and a gun of hot (wand) All of some other parts has been missing. This has comprised an iron to solder. Some tips for an iron. A headline for a gun of hot and an iron, some nozzles to air a sponge and spool title. Achieved a company and his rushed out of some parts disappeared. Pleased with a fast response to a question. A prize was a lot of and has has used now a wand of air he in the pair of cct. Import to comprise that you have to that NEVER GONE BACK of a blower using a transmission to be able to. Turned a temp to low and has left the quota with an air that flows to extend a life. It looked in diverse and this one was a better in a row of prize. I think that that I will buy a desoldering gun and the give shot that. I have found a control of temperature was fast and attentive. Value of the money and I has liked him a fast service to fix my question. While to some parts so that pode does not say roughly an iron. I will give the gone when it arrives and will see to like work.
5 / 5
Has been using he for the pairs of months and I so that they are really please with him. A work of gun of the good heat and take hot quite quickly. Included goes for an iron to solder.

A two element would change to the draw is is a period of some bosses and cool down of a gun. Some bosses are quell'has bitten short as yes you are planning dipped this in your bank of work. To cool down a gun among overdrive some time 10 to 15 min after closing down. Quell'Concealed would not owe that prevent calm to buy this canal.
4 / 5
After finding video of zeros of this canal to solder on-line, has taken the casualidad and has ordered one. It is coming a lot of packaged, with instructions, with which plugging he in and touching with him, has known has had the real gem of the canal to solder in my side. The no really needs a, but I maintaining has it. I have decided to take avert my computer of office and Of-solder the chip out of him, then try the place results his the little more difficult that one could think, probably has not used a right tip reason with which have been done a computer does not have behind turned on....
5 / 5
This unit is excellent. It has not known Never that has been missing until it has taken a gun of hot air . Of the heat shrinks to rework this unit is fantastic. An iron has multiple tips and is extremely of confidence.
5 / 5
Plug3d He in and there is remarked immediately an iron to solder digital temp the exposure was faulty. A prime minister exposed has not been functional. There it went it the week now this in spite of not doing .
4 / 5
The element adds, very happy with him and a time has taken to ship
5 / 5
It has it it has not TRIED FULLY This Produces Still but looks partorisca Do Well like this far !
4 / 5
Element very good. It will be a lot of gain with my builds of project. Hot Quickly and is very calm.
4 / 5
The Defender does not operate . Lucido Spends The souder is intermittent.
4 / 5
Looks very built, the law adds. Very happy with him. Shipped very quickly too much.
5 / 5
Each professional knows for now that AOYUE is the mark of professional use partorisca electronic engineers that they want to take a work done.
M Like the first user in Aoyue the products was the litlebit has concerned is build partorisca use of long time like my ZD canal that use partorisca on 18 years now.
In that has it Already a AOYUE 701A++ (partorisca two month now) this in spite of, has left all my worries behind me, the cause has verified he of upper to subordinated and is fact very inner and respectfully has gathered.
This was also my first time has used the 'hot air' soldering/desoldering canal (the cause there is never treat smd first parts) to the equal that has there was also some doubts in an use and quality of a 'hot air' pencil but while using it there is of then takes a work done, as I guess am satisfied with him too much.
I also verified in an interior of this canal and like the another I already has, is also inner very gathered also.
HAS two transmission-@@@knob of tower in front of a unit partorisca turn 'on' and regulating a temp (C) partorisca iron and pencil. It would prefer separate transmissions this in spite of (partorisca this use like other models or the companies have) but while they have had to, is well with me.

Comes with 8+1 extra soldering tips partorisca any use in a container and 3 air outlets partorisca a pencil ( all know the one who expensive some parts can be when sold for separate)
To the left is not partorisca forget concealed: A prize on is also awesome also!
Has satisfied totally with this unit and I totally recommend it to all the professionals or no.

Top Customer Reviews: Aoyue/Hakko Chisel ...

Rating: 4 out of 5 with 1 ratings
4 / 5
Good selection of genuine Aoyue branded chisel tips of boss. The selection is biased more to some smaller tips. It would have liked him an opposite - selection of better big tip. They are by train partorisca use them On the SIGMA 60D and is doing and that stands up utmost.

Top Customer Reviews: Aoyue 474A Plus ...

Rating: 4 out of 5 with 7 ratings
4 / 5
Work really well in the plot of circuit broads, has found some broads this was advantage free solder partorisca be difficult.
Some HP squad broads was difficult because of such the next tolerance of small hole that the so only is returned part in.
In general once has used them he of awhile and imagined out of his quicks and learn that anything concealed was the advantage free solders to take the much bigger temp. To do, also reflow the advantage and to beat normal to solder in some joint really helps.
In general am quite happy and ask the one who has left them without him.
5 / 5
The nave was fast product and very packaged. Had a bit of the curve to learn with a desoldering canal but after any practical work a lot well. It heats on fast. It is easy to clean. I am satisfied enough.
5 / 5
The work adds. Especially to take has saldado the main things like this of the big transmissions and terminal band.
5 / 5
Has to maintain it clean, but the law adds otherwise.
5 / 5
After the a lot of investigation and the positive critiques have decided to take this canal and I am happy has done. The law adds while calm the clean maintenances and is the fraction of a cost of a Hakko has been salivating on for a past 2 years. Ossia For the win.
5 / 5
Work really well in the plot of circuit broads, has found some broads this was goodness free solder partorisca be difficult.
Some HP squad broads was difficult because of such the next tolerance of small hole that the so only is returned part in.
In general once has used them he of awhile and imagined out of his quicks and learn that anything concealed was the goodness free solders to take the much bigger temp. To do, also reflow the goodness and to beat normal to solder in some joint really helps.
In general am quite happy and ask the one who has left them without him.
4 / 5
A product of good quality for a Money. THANKS TO plot.

Top Customer Reviews: Aoyue 9378 60 Watt ...

Rating: 4 out of 5 with 51 ratings
4 / 5
I have received Aoyue 9378 and to the delivery could say that it is the extremely very built has saldado Canal. To the majority of next inspection was the very drawn canal , a first time has seated them partorisca solder the law to project like this announces. Hot until the temperature dipped in roughly 15 seconds, system of easy Paper the setup and global works to the equal that have to that. I love a capacity to use different irons. A regular fashion , the Aoyue WQ iron, the pair of teaser and the T12 iron if like this desire. An automatic system select which spend that love use. His weight is roughly 4 to 5 pounds as his has the heffley transformative, as it knows does not go to be the overburdened at all. It is everything in the good value for a money and I would recommend it to any concealed has loved the a lot of built has saldado canal.
4 / 5
Very happy with this iron to solder like this far. It is built very solid, and feels like the piece of quality of crew.
An iron is comfortable to resist, and no hot taking in your hand.
Comes with the spare element, and tonnes of tips in of the different forms.

Are a Electro-Maquinal Technologist and has been soldering for 10+ years.
The majority of the workshops of pertinent/laboratories have been to have Weller canal like the level, and easily bend a prize of east a. I like this felizmente use this unit.

A digital exposure with current temp the indication is the good characteristic leaving you to be sure is in fact in yours place has wished.
Also like that has the reel to resist solder spools in a stand.

In general very happy with him, and to good sure would recommend it to any one looking for an iron with the canal of base.
5 / 5
A device is a lot well for a prize, small, a lot of maniable and coming with MULTIPLE TIPS and and extra heater. If it was not in an accuracy (ossia perhaps so only my device), surely would recommend it. Amur A car-prójimo.

There is so only 2 complaint:

1. It manufactures incumplimiento a temperature is totally very attentive of a digital poster! It has dipped a unit for a 350C and has taken a temperature of 3 differents digital thermometer. Without any calibration a temperature was around 280C. Wow, 70C Out of a temperature closely!!. For casualidad has in a paper the adjustment config and can locate to +70C. As I setup an adjustment to a maximum and was able to finally take attentive temperature, at least +-2-3.

[Importing] any one has used a long a lot POUR still for small electronic, a surface in an end is like this small and dissipate too quickly when you apply to a metal that yours is risking to do cold connection. Used the TIP of half with the flat face for good contact.

When Calm yours calibration, take your time and has left the heat on the a lot of 5 min for a first time. As, the mark sure has good contact among your tip of a pen and a probe of thermometer. In my chance, the type used of thermocouple K and to do good contact I alway clean on a probe and dip the plot to solder in a tip and dip a thermocouple in a solder. Any take it to him his of then do of different metal. Any sinister touches a lot another metal or calm will dissipate a heat. This was a better method I found to take a big temperature. Also it depend in your thermometer and measure of some tips. I try the few methods and one has found more was to not leaving a probe more than 3-5 as in a tip, give 5 as to heat and repeat your test.

2. Esthetic Subject: will have prefer a connector to be behind, as when calm any one has used a boss is not always in a front and he the plus cleaned benchwork. In mine freetime, can try change a connector to a backside yes is possible.
5 / 5
Has done WELL for the pair of years of occasional use. First what to fail was a LCD exposed where a half bar has been gone likes 8 would result the 0 and one 'Is groups of result leave. The temperature there is prendido to correspond to a together temp, Finally everything are trace startup was a ERR1 message, but any of a troubleshooting the procedures have solved a question and a unit are result unusable. Based in a prize, and a number to time used that, cost of the property was in the dollar for use. Probably it is it more be satisfy if this cost had been in the say me for use. He no this deception again and now will do that it would have to that it has done in a first place and take Walker or equivalent.
4 / 5
A bit fiddly and need to be maintained up in some settings some big plus to be effective, at least in my chance when I am doing bosses for my crew, but otherwise solid (as far) and decently has built. Smells The little ape when I opened it a first time but this obviously there is at all to do with his action into use. It is comfortable to resist, easy to manoeuvre, has abundance of the power and comes with a variety of tips that is easy to change. The mine has come also with the cartridge of spare heater. I have limited experience with soldering and this unit has done my easier life once I dialed he correctly. Like the corollary of my experience has admitted pleases to take this description so that well...
Pode A lot gauge this for the professional use but is so only in perfect for gives it to support like him.
4 / 5
Yes, taste of a lot! It is so only be he has used the dozen times these six months, and his action warrants at least four stars.
That when be said, have so only win the subject of quality of the build that can be extended or no, but certainly has not been posted on-line anywhere, and is easily fixable, like this here is:
Into use, has turned away for the pocolos small and when you look again has has looked for having shut was, that waste to restart. Any light or exposure, or evidence to do. The fuse was a lot. I have verified/swapped beat and cord, any joy. As I opened it up and it has verified a street of power with my metre, that finds that a current in a side changed of a line has not arrived in a transformer. This promoted (i.et. fixable), But at all looked bad. Baffled, has examined attentively some connectors with the glass to augment and has discovered that one of one crimp the connectors of aircraft have had a slightest empty where a boss has been attached, leaving light movement. Attaching a cord to a unit, or that manages a unit at all could cause this movement.
Although it can have found and has used my old wimpy soldering pencil, in that has the alike connectors have chosen manually instead to do the connector of provisional substitute wires which has tried my diagnostic and left to use this iron adds to repair (has saldado bridge) an empty in a connection of original boss, which I then reinstalled.
If this question has spent so only my unit, or the little another, then am extracted no big. If it is spending the hundreds then speaks bad of a quality of process of the manufacture. Of then I have not listened a lot another with this subject, I chalk he until the small piece of bad regime, which hardly diminishes my good regime possesses are adds to solder system.
5 / 5
Excellent soldering canal. A quality and feels has surpassed far my expectations. A pen partorisca solder chair well to resist, the bosses looks to be good quality, and a canal feels quite solid. The row of low temperature enough to hardly melt plastic, which can be useful for the a lot of things has to that 3D printer.
5 / 5
East soldering canal all I need and more. A lot quickly to take the working temperature. Has a car shutoff look which is configurable and detection of vibration in an iron. The time of recovery is good and some options of settings the the tool adds. An element of the extra heating and the tips are easy to the transmission was. A value adds! Shopping this again.
4 / 5
Purchased it at the same time, a prize was less than $ 90, and I when I have begun to recommend the to another, said to knots a prize was much bigger. Still it is the unit adds, but does not think would have purchased he in some prizes plus very new am seeing >$ 130
4 / 5
selection of Temperature and some variable tips that is coming with an iron to solder is in prize . It leaves precision that is key to the good tool especially when doing in PCBs. A solder barrel to title of the wheel in a stand can be the little smaller in to the diameter likes a bit the circles does not return because of a big barrel. Otherwise, would purchase again if this a does not break never which do not see it doing like any punctual time.
4 / 5
Fast nave of Amazon. The canal has built well, fast heating, very characteristic (2 hot presets, time of sleep, the lock was..), With the plot of accessories has comprised.
4 / 5
The works add, a tampon of foam is in a thin side. And a ray or the ray that resists a tray partorisca foam to the base is hard to install, am sure they the fact touched in future. But has the good manual in English.
4 / 5
Like this far, like this good. Used he partorisca a first time and looks really very partorisca a prize.
5 / 5
Heats Quickly with control of good temperature. A solder spool is quell'has bitten useless especially when doing with small pieces, and, together with an accessory of tampon of the a bit difficult cleaner partorisca install. A headline of iron is particularly useful and convenient. In general, the good product.
5 / 5
Excellent iron. Hot On very quickly and having some digital temp readout is the more add. I have bought he because of some extra tips and heating element, which in this prize has not beaten can be. It was not if it is very enough for work of production but like him hobbyist this has saldado the laws of plot well. It recommends it.
4 / 5
A súper soldering canal in a prize abordable.
Has used this product to create around fifty ape and stereo bosses for my recording studio of house, and work perfectly.
4 / 5
All I need and more. A lot quickly achieve temp and maintains temp a lot well. The time of recovery is to add and some diverse settings the the tool adds. An element of extra heating and the inclusion of tips is the good touch and the fact the value adds!
5 / 5
Ossia An excellent soldering canal. It heats a lot quickly and it maintains a temperature a lot well. It is also a lot a lot that comes with tips of prizes. An excellent value.
5 / 5
Has produced of quality. Hot A lot quickly and comes with the row of bit.
4 / 5
I have been of the very economic soldering iron to the east a, and will not go back never. Much more compatible heat, much faster, can change among Celsius and Fahrenheit, dreams it the way is very convenient. Built strong and built to last.
5 / 5
Fantastic has saldado. Utilisation this device to mainly solder solar cells to create full poster. Hot Quickly, come with multiple tips. Very happy with compraventa.
5 / 5
Wonderful product. Easy to use. Arrived a lot quickly and was packaged well.
4 / 5
This unit has done like this announced, there was roughly the week now. It would not like to go back the so only an iron. You are shipped immediately, and has arrived a sail a date of arrival has estimated. They are very pleased with this compraventa.
4 / 5
Good iron. Hot On besides quickly that a desert of Arizona. There is not coming with the extra tips but those have been shipped out of rights when I left him know has been missing.
5 / 5
Master. It covers really fast. Easy to install. It comes with multiple tips.
Use on all my hobbies
4 / 5
perfect.
A lot of build. A temperature is constant and achieve quickly
5 / 5
has looked for the temperature has controlled partorisca solder canal and this one was in a row of the correct prize that pensa in to the the canal likes would have to that side. Everything , and hot on fast.
Would recommend this canal to any one.
5 / 5
It has not done a lot of work with him still, but like this far like this good.
4 / 5
A lot soldering canal partorisca a prize. Hot On fast and a control of temperature is very attentive...
4 / 5
Does the better way that any iron partorisca solder Ive has used before a lot of nibs to spare
4 / 5
This unit is complete junk and does not have any guarantee !!
4 / 5
I really like this Soldering Canal. They are very impressed that quickly it begins and comes until temp. I go to enjoy this in my bank to do from now on

thank you
4 / 5
quality Very Big for a prize,,state using for 2 years with questions of zeros,,very of confidence reward excellent
5 / 5
Fast delivery and Of très good qualité
4 / 5
big Exposure, sturdy crew, distribution of perfect heat, very easy to use.
5 / 5
Does not have It standby act that there is remarked, if it leave it on, night of rests.
5 / 5
A recipient of a present is very happy with him.
So better that his old rule partorisca solder gun.
Attentive temperatures.
4 / 5
I have received Aoyue 9378 and to the delivery could say that it is the extremely very built has saldado Canal. To the majority of next inspection was the very drawn canal , a first time has seated them partorisca solder the laws to project like this announces. It heats until the temperature dipped in roughly 15 seconds, system of easy Paper the setup and global works to the equal that has to that. I love a capacity to use different irons. A regular fashion , the Aoyue WQ iron, the pair of teaser and the T12 iron if like this desire. An automatic system select which spend that love use. His weight is roughly 4 to 5 pounds as his has the heffley transformative, as it knows has not been to be the overburdened at all. It is everything in the good value for a money and I would recommend it to any concealed has loved the a lot of built has saldado canal.
4 / 5
A device is a lot well for a prize, small, a lot of maniable and coming with MULTIPLE TIPS and and extra heater. If it has not been in an accuracy (ossia perhaps so only my device), surely would recommend it. Amur A car-prójimo.

There is so only 2 complaint:

1. It manufactures incumplimiento a temperature is totally very attentive of a digital poster! It has dipped a unit for a 350C and has taken a temperature of 3 differents digital thermometer. Without any calibration a temperature was around 280C. Wow, 70C Out of a temperature closely!!. For casualidad has in a paper the adjustment config and can locate to +70C. As I setup an adjustment to a maximum and was able to finally take attentive temperature, at least +-2-3.

[Importing] any one has used a long a lot POUR still for small electronic, a surface in an end is like this small and dissipate too quickly when you apply to a metal that yours is risking to do cold connection. Used the TIP of half with the flat face for good contact.

When Calm yours calibration, take your time and has left the heat on the a lot of 5 min for a first time. As, the mark sure has good contact among your tip of a pen and a probe of thermometer. In my chance, the type used of thermocouple K and to do good contact I alway clean on a probe and dip the plot to solder in a tip and dip a thermocouple in a solder. A lot of glielo will stick to to him has done it of then of different metal. Any sinister touches a lot another metal or calm will dissipate a heat. This was a better method I found to take a big temperature. Also it depends in your thermometer and measure of some tips. I try the few methods and one has found more was the not leaving a probe more than 3-5 as in a tip, give 5 as to heat and repeat your test.

2. Esthetic Subject: will have prefer a connector to be behind, as when calm any one has used a boss is not always in a front and he the plus cleaned benchwork. In mine freetime, can try change a connector to a backside yes is possible.
5 / 5
Has done WELL for the pair of years of occasional use. First what to fail was a LCD exposed where a half bar has been gone likes 8 would result the 0 and one 'Is groups of result have left. The temperature there is prendido to correspond to a together temp, Finally everything are trace startup was a ERR1 message, but any of a troubleshooting the procedures have solved a question and a unit are result unusable. Based in a prize, and a number to time used that, cost of the property was in the dollar for use. Probably it would be more satisfied state if this cost had been in the say me for use. He no this deception again and now will do that it would have to that it has done in a first place and take Walker or equivalent.
4 / 5
A bit fiddly and need to be maintained up in some settings some big plus to be effective, at least in my chance when I am doing bosses for my crew, but otherwise solid (as far) and decently has built. Has odorato The little ape when I opened it a first time but this obviously there is at all to do with his action into use. It is comfortable to resist, easy to manoeuvre, has abundance of the power and comes with a variety of tips that is easy to change. The mine has come also with the cartridge of spare heater. I have limited experience with soldering and this unit has done my easier life once I dialed he correctly. Like the corollary of my experience has admitted pleases to take this description so that well...
Pode A lot gauge this for the professional use but is so only in perfect for gives it to support like him.
5 / 5
Yes, taste of a lot! It is so only be he has used the dozen times these six months, and his action warrants at least four stars.
That when be said, have so only win the subject of quality of the build that can be extended or no, but certainly has not been posted on-line anywhere, and is easily fixable, like this here is:
Into use, has turned away for the pocolos small and when it looked again is looked to have closed was, that waste to restart. Any light or exposure, or evidence to do. The fuse was a lot. I have verified/swapped beat and cord, any joy. As I opened it up and it has verified a street of power with my metre, that finds that a current in a side changed of a line has not arrived in a transformer. This promoted (i.et. fixable), But at all looked bad. Baffled, has examined attentively some connectors with the glass to augment and has discovered that one of one crimp the connectors of aircraft have had a slightest empty where a boss has been attached, leaving light movement. Attaching a cord to a unit, or that manages a unit at all could cause this movement.
Although it could have found and has used my old wimpy soldering pencil, in that has the alike connectors have chosen manually instead to do the connector of provisional substitute wires which has tried my diagnostic and left to use this iron adds to repair (has saldado bridge) an empty in a connection of original boss, which I then reinstalled.
If this question has spent so only my unit, or the little another, then am extracted no big. If it is spending the hundreds then speaks bad of a quality of process of the manufacture. Of then I have not listened a lot another with this subject, I chalk he until the small piece of bad regime, which hardly diminishes my good regime possesses are adds to solder system.
5 / 5
East soldering canal all I need and more. A lot quickly to take the working temperature. Has a car shutoff look which is configurable and detection of vibration in an iron. The time of recovery is good and some options of settings the the tool adds. An element of the extra heating and the tips are easy to the transmission was. A value adds! It would buy this again.
5 / 5
I like an iron partorisca solder and a control, the prize was bit it big
5 / 5
Excellent iron. Hot On a lot quickly and having some digital temp readout is the more add. I have bought he because of some extra tips and heating element, which in this prize has not beaten can be. It has not been if it is a lot enough for work of production but like him hobbyist this has saldado the laws of plot well. It would recommend it.
5 / 5
Ossia An excellent soldering canal. It heats a lot quickly and it maintains a temperature a lot well. It is also very a lot that comes with tips of prizes. An excellent value.
5 / 5
This unit has done like this announced, there was roughly the week now. It would not like to go back the so only an iron. It has been shipped immediately, and has arrived a sail a date of arrival has estimated. They are very pleased with this compraventa.
5 / 5
perfect.
A lot of build. A temperature is constant and achieve fast
4 / 5
It has looked for the temperature has controlled partorisca solder canal and this one was in a row of the correct prize that pensa in to the the canal likes would have to that side. Everything , and hot on fast.
Would recommend this canal to any one.
4 / 5
Has not done a lot of work with him still, but like this far like this good.
5 / 5
Does not have It standby act that there is remarked, if it leave it on, will remain night.

Top Customer Reviews: Aoyue 852A ++ SMD ...

Rating: 4 out of 5 with 9 ratings
5 / 5
Upgrading Of the $ 60 hot air canal I although it comes from the half row drop a concealed has not operated partorisca use the defender in a wand partorisca create an air. This unit is built well with all the construction of the metal and I do not doubt it could last me the few years.... This in spite of, have to say that an operative noise of this unit is very strong. Like this strong that is unbearable partorisca use like the daily canal. It pumps the air was a lot of and a heat is there, is so only strong. And have wins really nit chooses would have to that say that an interface is the little archaic looking. I go partorisca pay of the extra money and for the Fast canal. Partorisca you This in spite of, if you are in the estimativa and can be a noise of a compressor partorisca air that careers in your office that ossia probably the good unit partorisca you.
4 / 5
The work adds. It agrees partorisca take a ray of nave in a fund of a unit (RED), and double control ALL A plastic RETENTION Tabs immediately after unpacking. First unit there has been subject 3 Tabs broken and 2 Tabs in a fund had fallen in (of the that resists a unit of bomb in place).
5 / 5
Has compared of more a quality is very good. Mark takes a plastic tubing is not clogged or bent first to turn on, if calm whose an air will not flow by means of a nozzle of heat of the nozzle. Spent the mine a fire of unit there was included come from a nozzle this in spite of like this still does well once the unclogged a tube.
4 / 5
His basic ... It comes with everything has has announced bit and of the pieces ... I add partorisca hobbyist ... But im felizmente using it professionally .. Prize cant be beaten
5 / 5
the rays undressed on nozzle of hot and in a ray partorisca resist a vacuum accessory on. A unit has comprised also the plastic tube with the pair of cradles in an end without explanation that was it in some instructions. Missing ray in the nozzle of heat. It looks partorisca do otherwise.
4 / 5
The canal of hot air orders the good prize also done a work
5 / 5
A bit noisy when cooling down otherwise the tool adds , economic.
4 / 5
The works add! Looking for the system of the hot air more economic, this one will do!
4 / 5
Upgrading Of the $ 60 hot air canal I although it would try the half row drop a concealed has not operated partorisca use the defender in a wand partorisca create an air. This unit is built well with all the construction of the metal and I do not doubt it could last me the few years.... This in spite of, have to say that an operative noise of this unit is very strong. Like this strong that is unbearable partorisca use like the daily canal. It pumps the air was a lot of and a heat is there, is so only strong. And have has wanted to really nit chooses would have to that say that an interface is the little archaic looking. I go partorisca pay of the extra money and for the Fast canal. Partorisca you This in spite of, if you are in the estimativa and can be a noise of a compressor partorisca air that careers in your office that ossia probably the good unit partorisca you.

Top Customer Reviews: Aoyue 701A Plus ...

Rating: 4 out of 5 with 20 ratings
4 / 5
Well built, very drawn, an arrival was the litle rough in a chance, (the looks have painted on rust) the bomb is quite calm but resembles not having the very big airflow. Recommend the 1/4' 'Is tee with the twin ballvalve for a port of the suction of the air likes only hooks on a line of airs the time. Temperature of some tips for each so it can be aforados independently yes required and both sides can be dipped independently 1-60 minutes for closure to sleep when any into use.
A fat of silicone has distributed is supposed somehow to have the habit of the clean things but a manual does not say you anything roughly that.
Compaired To some $ 2000 frames, if hard his fly it! I can not look inner to see a quality to the equal that has focus of sticker of the guarantee.
But look well, some hoses am very flexible but will have to attended and see if a hule goes to break down quickly like this to the plot of another hule priced more drop of this zone of manufacture.
In general his probably currency that have paid for him compaired to another overpriced elections.
5 / 5
It averts of an annoying need to exchange vacuum hoses of line, this to/solder the canal fulfils my needs. As with any tool some needs to comprise like the work and that would owe that avert. I have learnt to avert trying sucks on big blobs to solder so that it tends covers it a pickup tube. Works with big quantities to solder is done more with an old hand has resisted to solder sucker. For all other works 'normal' in the circuit boards this creature is sum .

An another desire is that has had the better way to change in a vacuum bombs to solder that resists a tempature on and down the together keys. It is hard to do with a book achieves in.
5 / 5
I have had an ELDERLY Weller desoldering the canal has taken for free but the sucked (in a wrong way) and has had the really noisy bomb. One pumps in this thing is very calm - included compared to some to other modern frames likes him the one of any etc. has used. Probably I any need never a function of extraction of the smoke in a part of iron - but an iron comes with looking quite decent and will do the complete gain to mine other irons. It was not immediately obvious mine that side a desoldering the title of continuous gun in - all some pictures aim it on a sinister side of a faceplate but the mine there went it on a legislation - as in fact better result for mine setup. So only the bosses up have confused while dipping yours to arrive - another that that all were spent quite obvious he in and go. The only time will say if this thing is durable but like this far everything looks well.
5 / 5
I never taken to use it Weller pro diagrams , But this a fact each thing requires it to like the majority of material when or learn some signals some plus end of car he some quite incredible things. The clock was for pets 'cat' look to like that it chews in these vacuum hoses.
5 / 5
I payed around $ 270 CDN. It debate if so only it have to that go with a gun only model. But I payed abit extra and gpt an iron to solder too still although has the hakko. One smokes nozzle attatchment in an iron is very good and does exactly that it is supposes also. A gun is well for prize. I Like him maintain it clean and reflow a solders jointed while adding flow for better resultz.
5 / 5
I have bought this canal (Aoyue 701A++) especially for rework and joints of reparation with by means of components of hole.
I reworked several joints for him, and could say that he so only well for me.
5 / 5
I produce it adds. The works add. The light ache are are already down a cradle of filter and no easy to find the substitution but another that that very happy.
5 / 5
Ossia Really the glorious quality that has saldado /desoldering canal.
Having The long and excellent experience (in my laboratory of electronic, in Europe) with ZD soldering /desoldering canal, has to say that when I have seen this canal was the little has bitten sceptic.
Can say that it was like this familiarised with this canal ( has done with) that does not love laws with another mark. And rings the soldering /desoldering canal with him desoldering gun any one a gun of air but here in north Amsterdam was quite difficult to find the anymore.
My leading soldering canal (in Europe, 2009) has had two has lit LCD screens for each use, thermostats, the micro-processor this canal there is also two screens but with 3 figures each instead like his no bad of course. Also this canal has the micro-processor that control all use of the capacities of this canal. It is all the metal and weighed to spend but that surprised in fact was a awesomeness inside a unit. Has the air of quality adds big-bomb, the big heavy transformer and in a front a joint of circuit of the control. Included an interior of bosses is plant very orderly and a 'big voltage' the parts are all the discharges with thermo-shrinking tubes. A really awesome the work done! Like this when there is of then was satisfied really.
In front excepts some two screens of figure has three keys for each use. Also It Can he WAS' characteristic for both gun and iron also. In a backside of a unit has a transmission to be able to, the box of fuse and he detached boss to be able to.
Hot on both gun and iron almost immediately which are adds. Have has not wanted a carring boss in a cup, as I have taken was. I have used also my own headlines for both gun and iron.
A so only minus in this canal (until now) is a quality of a gun. Sound the one of low quality, done with the material among hule and plastic (according to another desoldering guns in a phase that is plastic of good quality) but he a work. Also AOYUE uses this gun to all his desoldering canal.
In general touch an excellent professional soldering and desoldering canal for long use...
5 / 5
In the first place it was, I have experienced a train of the name of the mark can buy in mine workplace. This extracted like this very like this train in my sincere opinion.

A desoldering the bomb is effective for more than things. Any always take a thru-the highland holes have cleaned out of soldering, but the trick is to dip it glob to solder on and then the use. Scavenging The parts of old crew is 10x easy with one of these.

A gun to solder is difficult to take used to been due to an absorber of smoke. This in spite of ossia the characteristic reception . My defender so only blows a smoke was, but this in fact takes out of a way totally, which are to add when substituting old leaky capacitors this burns some eyes.

My only complaint, which maintains this to be the 5 element of star, is a lack of the second vacuum port so that I can have both an absorber of smoke and a desoldering the gun that goes immediately. I know it costs more and do a canal bit it bulkier, but taste having to that both active while I am doing because transmission among a two to plot.

Neither has any subjects with some clips ( resists a vacuum hoses to some hoses of power in each part) all the world has mentioned more. They are resisting on finals for me.

PS: I have not bought this on Amazon because of him when being out of stock when it has ordered, forcing me to buy elsewhere. It is the little more economic here that anywhere more this in spite of, as it buy it here podes.
4 / 5
Averts of an annoying need to exchange vacuum hoses of line, this to/solder the canal fulfils my needs. As with any tool some needs to comprise like the work and that would owe that avert. I have learnt to avert trying sucks on big blobs to solder so that it tends covers it a pickup tube. Works with big quantities to solder is done more with an old hand has resisted to solder sucker. For all other works 'normal' in the circuit boards this creature is sum .

An another desire is that has had the better way to change in a vacuum bombs to solder that resists a tempature on and down the together keys. It is hard to do with a book achieves in.
4 / 5
Has had an ELDERLY Weller desoldering the canal has taken for free but the sucked (in a wrong way) and has had the really noisy bomb. One pumps in this thing is very calm - included compared to some to other modern frames likes him the one of any etc. has used. Probably I any need never a function of extraction of the smoke in a part of iron - but an iron comes with looking quite decent and will do the complete gain to mine other irons. It was not immediately obvious mine that side a desoldering the title of continuous gun in - all some pictures aim it on a sinister side of a faceplate but the mine there went it on a legislation - as in fact better result for mine setup. So only the bosses up have confused while dipping yours to arrive - another that that all were spent quite obvious he in and go. The only time will say if this thing is durable but like this far everything looks well.
5 / 5
Has bought this canal (Aoyue 701A++) especially for rework and joints of reparation with by means of components of hole.
I reworked several joints for him, and could say that he so only well for me.
4 / 5
The product adds. The works add. The light ache are are already down a cradle of filter and no easy to find the substitution but another that that very happy.
4 / 5
In the first place it was, I have experienced a train of the name of the mark can buy in mine workplace. This extracted like this very like this train in my sincere opinion.

A desoldering the bomb is effective partorisca more than things. Any always take a thru-the highland holes have cleaned out of soldering, but the trick is partorisca dip the glob partorisca solder on and then the use. Scavenging The parts of old crew is 10x easy with one of these.

A gun partorisca solder is difficult to take used to been due to an absorber of smoke. This in spite of ossia the characteristic reception . My defender so only blows a smoke was, but this in fact takes out of a way totally, which are to add when substituting old leaky capacitors this burns some eyes.

My only complaint, which maintains this to be the 5 element of star, is a lack of the as vacuum port so that I can have both an absorber of smoke and a desoldering the gun that goes immediately. I know it costs more and do a canal bit it bulkier, but taste having to that both active while I am doing because transmission among a two the plot.

Neither has any subjects with some clips ( resists a vacuum hoses to some hoses of power in the each part) all the world has mentioned more. They are resisting on finals for me.

PS: I have not bought this on Amazon because of him when being out of stock when it has ordered, forcing me to buy elsewhere. It is the little more economic here that anywhere more this in spite of, as it buy it here podes.
5 / 5
Well built, very drawn, an arrival was the litle rough in a chance, (the looks have painted on rust) the bomb is quite calm but resembles not having the very big airflow. It would recommend the 1/4' 'Is tee with the twin ballvalve for a port of the suction of the air likes only hooks on a line of airs the time. Temperature of some tips for each so it can be aforados independently yes required and both sides can be dipped independently 1-60 minutes for closure to sleep when any into use.
A fat of silicone has distributed is supposed somehow to have the habit of the clean things but a manual does not say you anything roughly that.
Compaired To some $ 2000 frames, if hard his fly it! I can not look inner to see a quality to the equal that has focus of sticker of the guarantee.
But look well, some hoses are very flexible but will have to attended and see if a hule goes to break down quickly like this to the plot of another hule priced more drop of this zone of manufacture.
In general his probably currency that have paid for him compaired to another overpriced elections.
4 / 5
Has had an ELDERLY Weller desoldering the canal has taken for free but the sucked (in a wrong way) and has had the really noisy bomb. One pumps in this thing is very calm - included compared to some to other modern frames likes him the one of any etc. has used. Probably I any need never a function of extraction of the smoke in a part of iron - but an iron comes with looking quite decent and will do the complete gain to mine other irons. It has not gone immediately obvious mine that side a desoldering the title of continuous gun in - all some pictures aim it on a sinister side of a faceplate but the mine there went it on a legislation - as in fact better result for mine setup. So only the bosses up have confused while dipping yours to arrive - another that that all were spent quite obvious he in and go. The only time will say if this thing is durable but like this far everything looks well.
5 / 5
I payed around $ 270 CDN. It has debated if so only it would owe that go with a gun only model. But I payed abit extra and gpt an iron to solder too still although has the hakko. One smokes nozzle attatchment in an iron is very good and does exactly that it is supposes also. A gun is well for prize. I Like him maintain it clean and reflow a solders jointed while adding flow for better resultz.
5 / 5
Ossia Really the glorious quality that has saldado /desoldering canal.
Having The long and excellent experience (in my laboratory of electronic, in Europe) with ZD soldering /desoldering canal, has to say that when I have seen this canal was the little has bitten sceptic.
Can say that it was like this familiarised with this canal ( has done with) that does not love laws with another mark. And it has looked for the soldering /desoldering canal with him desoldering gun any one a gun of air but here in north Amsterdam was quite difficult to find the anymore.
My leading soldering canal (in Europe, 2009) has had two has lit LCD screens for each use, thermostats, the micro-processor this canal there is also two screens but with 3 figures each instead like his no bad of course. Also this canal has the micro-processor that control all use of the capacities of this canal. It is all the metal and weighed to spend but that surprised in fact was a awesomeness inside a unit. Has the air of quality adds big-bomb, the big heavy transformer and in a front a joint of circuit of the control. Included an interior of bosses is plant very orderly and a 'big voltage' the parts are all the discharges with thermo-shrinking tubes. A really awesome the work done! Like this when there is of then was satisfied really.
In front excepts some two screens of figure has three keys for each use. Also It Can he WAS' characteristic for both gun and iron also. In a backside of a unit has a transmission to be able to, the box of fuse and he detached boss to be able to.
Hot on both gun and iron almost immediately which are adds. Have has not wanted a carring boss in a cup, as I have taken was. I have used also my own headlines for both gun and iron.
A so only minus in this canal (until now) is a quality of a gun. Sound the one of low quality, done with the material among hule and plastic (according to another desoldering guns in a phase that is plastic of good quality) but he a work. Also AOYUE uses this gun to all his desoldering canal.
In general touch an excellent professional soldering and desoldering canal for long use...
5 / 5
The quality was besides my expectations. I have ordered 701 Model (dual system) on 474 model as afterwards the plot of on-line investigation has imagined out of this 701 comes with AC engine of suction , which is much more effective that DC engine of suction in 474 model . It has done so only a bit mod on air of the engine of the suction was line . Factory the air has related was stain to boss of transformer . Plot of products of the engine of the vibrations and concealed could break some bosses of the transformer where is joined to the air was line . I have used a groups L Forms and plastic clamp partorisca locate he with organism .
5 / 5
In the first place was, has experienced a train of the name of the mark can buy in mine workplace. This extracted like this very like this train in my sincere opinion.

A desoldering the bomb is effective partorisca more than things. Any always takes a thru-the highland holes have cleaned out of soldering, but the trick is partorisca dip the glob partorisca solder on and then the use. Scavenging The parts of old crew is 10x easy with one of these.

A gun partorisca solder is difficult to take used to been due to an absorber of smoke. This in spite of ossia the characteristic reception . My defender so only blows a smoke was, but this in fact takes out of a way totally, which are to add when substituting old leaky capacitors this burns some eyes.

My only complaint, which maintains this to be the 5 element of star, is a lack of the as vacuum port so that I can have both an absorber of smoke and a desoldering the gun that goes immediately. I know it it would cost more and do a canal bit it bulkier, but taste having to that both active while I am doing because transmission among a two the plot.

Neither has any subjects with some clips ( resists a vacuum hoses to some hoses of power in the each part) all the world has mentioned more. They are resisting on finals for me.

PS: I have not bought this on Amazon because of him when being out of stock when it has ordered, forcing me to buy elsewhere. It is the little more economic here that anywhere more this in spite of, as it buys it here podes.

Top Customer Reviews: Aoyue Soldering ...

Rating: 4 out of 5 with 60 ratings
4 / 5
Measure: Works of Original version well and exactly is like this pictured. I have not been sure which well these cleaners of the tip of the brass was until I tried it. So better that the wet sponge! Reason do expensive soldering the still come canal with the sponges? Honradamente Can say will not go back never partorisca use sponges if my last few experiences are any indication . Any water has required, how is included easier that use. A temperature in your tip does not fluctuate so as he with the sponge. These products will maintain your tips partorisca solder like this cleaned, almost will look new! If you do a lot of soldering at all, require this product!

Pros:
- Light
- Effective cleaned some pours quickly
-No more than heading to a cookery to wet a sponge or while to an iron to heat behind up. So only stab an iron the little time and exits good and cleaned!

Gilipollas:
- Almost too light. Need to be resisted in place during that cleaned which is the potential hazzard if any careful.

Still would recommend.
4 / 5
Measure: the Original version Like this the thing is solid and an arm to rest snaps partorisca situate easily also but the still folds was easily.

Has to that say that an element is the main plot that has been expecting (almost hockey puck measure) like the fact the little uncomfortable to use. My iron to solder would go was unless situated a lot specifically resting in a base and in an arm a same time. I also found that a cleaner of boss of the brass has not done as well as the regular sponge clean tips neither.

This in spite of been due to a solid construction and so only that it is part of a container, to the chairs like is of the good option . For my tools is to good sure a overkill option.
5 / 5
Measure: Original version While it solder something has cleaned a tip partorisca solder that it uses the humid sponge. Law, this in spite of cool a tip down too much and having the wet sponge that hangs around while soldering the electronics so only looked like the bad idea.

A Aoyue soldering tip the works the most cleaned perfect to substitute a technician of wet sponge. I clean a tip without reducing a heat of an iron partorisca solder, and a container is sturdy, has the base of test of the slip and is easy to clean.
5 / 5
Measure: Original version Very better that water sponge and old pupil, clean a really good tip and a whole zone all immediately.

Is kinda expensive considering is so only the container of metal with the ball of more cleaned of the metal.
5 / 5
Measure: the Original version is described like this and is the basic but functional element partorisca have. They are the bit of the tinkerer and try my hand in of the different things. Any complaint with east and yes recommend return yours needs also.

Acclaims, Ontario Canada. April 2019
4 / 5
Measure: Original version This has to that be one of some inventions more are in report partorisca solder! I have bought this partorisca go with a new Weller Soldering the iron has bought. Honradamente Can say will not go back never partorisca use these stupid sponges. Any water has required, as his same easier that use. A temperature in your tip does not fluctuate so neither, different some regular sponges. These products will maintain your tips partorisca solder like this cleaned, almost will look new! If you do a lot of soldering at all, require this product!
4 / 5
Measure: the welding of Clean Original version the better iron that the moistened sponge and does not cool a tip. It looks very durable and easy to clean out of any solders that builds up. I have used this partorisca spend behind soldering pour that has thought was fubar. An only downside is that no hanged any a lot of and like this he the slides around yes are cleaning vigorously.
4 / 5
Measure: the Original version Always uses the sponge of boss of the brass partorisca your cleaner of tip in place of stainless steel. A brass doesnt absorb like this hot like the normal water the fact of absorbent sponge and doesnt causes thermal incident. He his does well in of the terms partorisca clean a tip
5 / 5
Measure: Original version I the plot partorisca solder this year, and a wool that is coming with my iron there is prendido partorisca do also. Like other descriptions have promised, has found this has done astonishingly well. You take the shiny clean tip after the few paintbrushes with a tip of hot iron. I also as it bite stand of money. A bit pricey so that it is, but the must-have for frequent soldering.
4 / 5
Measure: the Original version that has surprised! I have used partorisca use the moist sponge or sweet sandpaper when an iron partorisca solder has taken very bad, but included concealed no the very good work. I have read some descriptions and has thought would give this tries it. Wow, fantastic Work! The better way, faster and easier then anything has tried more. I wont be using anything but this in my iron partorisca solder again! I produce it adds! Thank you!
5 / 5
This are add partorisca me so that I am not a lot of the one who is soldering daily. Ossia Perfect for when I need/uses it.
def Be by train partorisca buy it Again in a future.
4 / 5
Amazing! I have used partorisca use the moist sponge or sweet sandpaper when an iron partorisca solder has taken very bad, but included concealed no the very good work . I have read some descriptions and has thought would give this tries it. Wow, fantastic Work! The better way, faster and easier then anything has tried more. I wont be using anything but this in my iron partorisca solder again! I produce it adds! Thank you!
5 / 5
I the plot partorisca solder this year, and a wool that is coming with my iron there is prendido partorisca do also. Like other descriptions have promised, has found this has done astonishingly well. You take the shiny clean tip after the few paintbrushes with a tip of hot iron. I also as it bite stand of money. A bit pricey so that it is, but the must-have for frequent soldering.
4 / 5
He a work but is a lot small and light. It moves when you try to press a tip partorisca solder his. More partorisca stick it down to your bank of work.
5 / 5
I like this better that a sponge partorisca water to clean a tip of an iron partorisca solder. My supposition is that I last the very long time also ;)
4 / 5
has had my doubts but this thing does really well.
Takes so only a right quantity partorisca solder of a tip Everytime and does not have to that add water never
are not never going back the sponges.
5 / 5
Clean a lot well and more economic that a Hakka offering. A stand is well, any one the majority of useful characteristic like this totally depends in your creation of iron and geometry.
4 / 5
This are add partorisca maintain your iron partorisca solder cleaned, without the pause. Works really well. I recommend this product.
4 / 5
Thought it would be is very light. A prize was the little big, has the cushioning down the , partorisca prevent movement in a table, but a metal has bent that surrounds isnt very bent , as it moves around :-/
characteristic Fresco partorisca have the support partorisca hang your partorisca solder iron to!
4 / 5
To the equal that describes, like another reviewers has declared sound to the little light like them to them the slides around the bit in the smooth table, dipping something grippy down has to that help this in spite of. A stand' works of parco but likes to bend the bit when my gun partorisca solder (a Weller 100) is rested on that. In general I am happy with a compraventa the good work that cleans an iron
5 / 5
The utilisation each timeI has to that it maintains my tip partorisca solder cleaned and resists an iron partorisca store with a fold down title.
5 / 5
Games very practical partorisca clean but a little elevated prize touches a small bowl in tole and joins tiny wool of copper.
4 / 5
Really likes to of me and arrive quickly... I ask what hard time ... I ask it fill up with soldering and need to be substituted... But I love it and probably substitute it last the year or so much! Better that to humid sponge! Value he
4 / 5
this has done a lot still in mine old 'crusty' soldering tip. Cleaned easier that sponge/partorisca water
4 / 5
any waste inclusos your time with humid sponges. An ease and start of action of one of this well some extras few dollars and facilitated of cleanup.
4 / 5
Takes a work done. Any much more partorisca say. The different looks that a picture. The arrival is all chrome and some words are in a colour/of bronzed rose.
5 / 5
Will do an excellent half stuffer partorisca my husband like this at present is using so only using it clump of wool of old steel. It likes that of this also has the one who looks the other of tip or at least partorisca take excess has saldado was.
5 / 5
Partorisca Occasional soldering is is handy element partorisca have the joint to this iron this economic plus can find on-line or in of the tents of hardware.
5 / 5
Has bought three. A partorisca my iron partorisca solder and a partorisca my gun of adhesive partorisca clean of a tip. A third an east the present partorisca the partner.
5 / 5
Mina has arrived never could do without water and sponge. They are obviously an amateur and nowhere approach a power in soldering but this cleaner of tip has done my occasional works much simpler. It maintains a good tip and clean with the minimum loss of heat.
Absolutely recommended!
4 / 5
Works amiably. Decent quality stainless cup. It can use the ounces of pair of weight in a subordinated but does not slip to behind prevents partorisca skate around. Lana of brass looks good quality .
5 / 5
Leaves a lot of critic required in soldering.
The excellent product and this clean some pours partorisca solder better that a wet sponge.
5 / 5
Does amiably partorisca clean my tips. Headline to spend integrated the in fact dual use and agree me to clean before the place down. No too more to say roughly that!
4 / 5
Has to that have for any the one who has saldado. Much easier to clean the tip with that the sponge, and done the better work. It has hanged enough like this when you stab a his iron, does not move during your labour bank.
5 / 5
Looks an iron burns this material. It has used again the paper towel has wetted
5 / 5
A lot of gain to clean on a tip of an iron to solder!
5 / 5
This does a better work that the sponge for me, is quickly and easy and need any interview another that the be has substituted each one once and the moment is doing a lot of work.
4 / 5
Better way to clean a soldiering tip of iron of residue that an usual spounge, has no enormous apike in dirrence among cleaning like this law of maintenances without interruption of entity.
Recommended
5 / 5
Date of mandate: September 1, 2015
Quotes of Delivery: September 8, 2015
Days Partorisca Delivery: 7
My Bookmark:4/5
Of: Canada
To: Canada

produces Good and good prize.
4 / 5
Was skeptical other descriptions before buying this product, but really does fantastically. It is better way that the sponge and value a compraventa.
4 / 5
Does well and can substitute a material with wool partorisca armour plate when it takes also solder-and.
5 / 5
Does wonderfully partorisca clean my iron partorisca solder tip. Any question.
5 / 5
I Desires some bases were weighed more as he a lot of slide around like this easily. otherwise, the work adds after the year partorisca use a lot infrequent.
5 / 5
Is Joined wool of assier like any Aspiration. Fact Three very lucida work
5 / 5
Works well and exactly is like this pictured. I have not been sure which well these cleaners of the tip of the brass was until I tried it. So better that the wet sponge! Reason do expensive soldering the still come canal with the sponges? Honradamente Can say will not go back never partorisca use sponges if my last few experiences are any indication . Any water has required, how is included easier that use. A temperature in your tip does not fluctuate so as he with the sponge. These products will maintain your tips partorisca solder like this cleaned, almost will look new! If you do a lot of soldering at all, require this product!

Pros:
- Light
- Effective cleaned some pours quickly
-No more than heading to a cookery to wet a sponge or while to an iron to heat behind up. So only stab an iron the little time and exits good and cleaned!

Gilipollas:
- Almost too light. Need to be resisted in place during that cleaned which is the potential hazzard if any careful.

Still would recommend.
4 / 5
Like this the thing is solid and an arm to rest snaps to situate easily also but the still folds was easily.

Has to that say that an element is the main plot that has been expecting (almost hockey puck measure) like the fact the little uncomfortable to use. My iron to solder would go was unless situated a lot specifically resting in a base and in an arm a same time. I also found that a cleaner of boss of the brass has not done as well as the regular sponge clean tips neither.

This in spite of been due to a solid construction and so only that it is part of a container, to the chairs like is of the good option . For my tools is to good sure a overkill option.
5 / 5
There is soldato the little hundred or perhaps connections of thousand that use this sponge of boss and is still mostly aesthetic and entirely functional. Like this violently it submerges a tip of an iron to some looks of sponge to be dulcemente untangling it, which the fact less enough, but my workshop is anything but the room of show.

The law adds and the meeting am taking a soldering much faster with an always-cleaned the to me-still-shiney tip.
4 / 5
While it soldered something has cleaned a tip to solder that it uses the humid sponge. It has done, it has cooled this in spite of a tip down too much and having the wet sponge that hangs around while soldering the electronics so only looked like the bad idea.

A Aoyue soldering tip the works the most cleaned perfect to substitute a technician of wet sponge. I clean a tip without reducing a heat of an iron to solder, and a container is sturdy, has the base of test of the slip and is easy to clean.
4 / 5
Forgets sponges, ossia a way to clean your iron to solder tip. It is the simple likes poking a copper point with a tip once in the moment. It will restore a tip to 'as new' condition a lot easily and quickly.

Recommended for any the one who knows that it arrest to solder.
4 / 5
Ideally would have both this and the wet sponge, with a sponge that is the last net on indictment this in spite of have had to choose one of a two this would be 100 a correct election.

Cleaning a tip is quickly, estaca in there, transfer, twirl, backflip and is all cleaned. Element very simple with infinite utility.

A brass is in fact big quality, he a lot of flake or take burned.
5 / 5
Now yes so only could agree more often to ip my iron to solder in this first of the unplug.
A built in the stand is the good touch also like one this is coming with my iron to solder is like this cut his entirely useless.
5 / 5
This has to that be one of some inventions more are in report to solder! I have bought this to go with a new Weller Soldering the iron has bought. Honradamente Can say will not go back never to use these stupid sponges. Any water has required, as his same easier that use. A temperature in your tip does not fluctuate so neither, different some regular sponges. These products will maintain your tips to solder like this cleaned, almost will look new! If you do a lot of soldering at all, require this product!
5 / 5
Very better that water sponge and old pupil, clean a really good tip and a whole zone all immediately.

Is kinda expensive considering is so only the container of metal with the ball of more cleaned of the metal.
5 / 5
Is described like this and is the basic but functional element to have. They are the bit of the tinkerer and try my hand in of the different things. Any complaint with east and yes recommend return yours needs also.

Acclaims, Ontario Canada. April 2019
5 / 5
It weaves it to them partorisca solder this year, and a wool that is coming with my iron there is prendido partorisca do also. Like other descriptions have promised, has found this has done astonishingly well. You take the shiny clean tip after the few paintbrushes with a tip of hot iron. I also as it has bitten stand of money. A bit pricey so that it is, but the must-have for frequent soldering.
5 / 5
Always use the sponge of boss of the brass partorisca your cleaner of tip in place of stainless steel. A brass doesnt absorb like this hot like the normal water the fact of absorbent sponge and doesnt causes thermal incident. He his does well in of the terms partorisca clean a tip
5 / 5
Cleaned solder the better iron that the moistened sponge and does not cool a tip. It looks very durable and easy to clean out of any solders that builds up. I have used this partorisca spend behind soldering pour that has thought was fubar. An only downside is that no hanged any a lot of and like this he the slides around yes are cleaning vigorously.
4 / 5
He a work but is very small and light. It moves when you try to press a tip partorisca solder his. More partorisca stick it down to your bank of work.
4 / 5
Has had my doubts but this thing does really well.
Takes so only a right quantity partorisca solder of a tip Everytime and does not have to that add water never
are not never going back the sponges.
5 / 5
To the equal that describes, like another reviewers has declared sound to the little light like them to them the slides around the bit in the smooth table, dipping something grippy down would owe that help this in spite of. A stand' works of parco but likes to bend the bit when my gun partorisca solder (a Weller 100) is rested on that. In general I am happy with a compraventa the good work that cleans an iron

Top Customer Reviews: Aoyue 2703A Plus ...

Rating: 4 out of 5 with 6 ratings
4 / 5
I have had this canal partorisca solder of then Jan 10 2016 and has been adds. In fact, a date was the shortly after quell'concealed likes first the unit has been flown in traffic and felizmente a UPS the point of Access has refused to accept likes the weight has listed was nowhere approach a weight listed in a box.

Once this is to be order has taken to 2nd unit shipped and has been flawless, so only the little quirks. It is quite strong (and has takes yes a ray) A sucker of smoke pulls a smoke by means of tubing of a solder tip, all a way by means of a unit and then out of a gun of hot air. This does not look the very good way to ensure the life of long bomb or clean tubes. The desire has added the diverter or something to have a smoke goes to 2nd street that could dip you out of a window or at least have some class of the better filter for all a flow smokes which can build up and solidify in a tubing, and so that it assumes an inner bomb also. Has has had to that already clean some hoses was and has been impacted so only that it is not in that he a full way by means of a canal and out of a gun of hot, almost loves look in a mechanism to bomb to see roughly cleaning it. At least a gun of hot air can burn was. This ignores a fact a solder the sucker sucks by means of a same way, but the smallest diameter that tubes. So only I love it to last without that has to that parts of substitute because of something stupid likes has saldado smoke.

Real toss Up among 3 and 4 stars been due to a flow buildup subjects.

Still, is the add compraventa, especially when it was in $ 100 less than now.
5 / 5
Crew of the level of entrance adds, but will find your self doing interview in a desoldering the gun more than you would like me.
5 / 5
I produced is surprising. As it can do and for a prize good quality. But I am not happy with boxes of the nave of the amazon has suffered the harm every time ordered it.
In an end would say that I am very happy with cost of mine and I also damage the thanks to amazon to offer this product in
4 / 5
the canal has been packed well and arrived inside the few days. It was easy to gather. It has had no parts disappeared.

So many has takes far the little SMDs using a gun of hot air. Considering is some first time have done this, am surprised some results was like this good. An iron to solder works to the equal that has expected. A container comprises the only soldering tip, as it was a lot if the together of popular tips was available. Considering nave of cross of flange, buying tips in the insiemi probably would be better that buying one the time. Still I owe that try a desoldering gun.

Is the pleasure that extracted the company this is to imagine was like this to take produced to Canada without an usual hassle.
4 / 5
I have had this canal partorisca solder of then Jan 10 2016 and has been adds. In fact, a date was the shortly after quell'concealed likes first the unit has been flown in traffic and felizmente a UPS the point of Access has refused to accept likes the weight has listed was nowhere approach a weight listed in a box.

Once this is to be order has taken to 2nd unit shipped and has been flawless, so only the little quirks. It is quite strong (and has takes yes a ray) A sucker of smoke pulls a smoke by means of tubing of a solder tip, all a way by means of a unit and then out of a gun of hot air. This does not look the very good way to ensure the life of long bomb or clean tubes. The desire has added the diverter or something to have a smoke goes to 2nd street that could dip you out of a window or at least have some class of the better filter for all a flow smokes which can build up and solidify in a tubing, and so that it assumes an inner bomb also. Has has had to that already clean some hoses was and has been impacted so only that it is not in that he the one full way by means of a canal and out of a gun of hot, almost loves look in a mechanism to bomb to see roughly cleaning it. At least a gun of hot air can burn was. This ignores a fact a solder the sucker sucks by means of a same way, but the smallest diameter that tubes. So only I love it to last without that has to that parts of substitute because of something stupid likes has saldado smoke.

Real toss Up among 3 and 4 stars been due to a flow buildup subjects.

Still, is the add compraventa, especially when it was in $ 100 less than now.
5 / 5
the canal has been packed well and arrived inside the few days. It was easy to gather. It has had no parts disappeared.

So many has takes far the little SMDs using a gun of hot air. Considering is some first time have done this, am surprised some results was like this good. An iron to solder works to the equal that has expected. A container comprises the only soldering tip, as it would be a lot if the together of popular tips was available. Considering nave of cross of flange, buying tips in the insiemi probably would be better that buying one the time. Still I owe that try a desoldering gun.

Is the pleasure that extracted the company this is to imagine was like this to take produced to Canada without an usual hassle..